What did you reload today?

I didn't reload today; rather I started my first attempt at refinishing a stock (Remington Model 11). Still a fair amount of work to be done.

View attachment 649291

I would like to know your plan as well, as I am working on an Ithaca 37 that looks like that with an additional dose of heavy clear varnish.
 
A few 577 Snider for Monday or Tuesday, weather permitting

577 Snider.jpeg


0-20.jpeg
 
Last edited:
Does anyone knows were i can buy RWS UNIC CLASSIC bullets in .375? Would love to reload them.

Thank you.

RWS-UNI-CLASSIC.PNG
 
Last edited by a moderator:
Just for giggles and grins: this morning, some 6.5 Carcano with 120 grain Ballistic Tips.

I have not made it to the range yet. I've felt lazy, it's colder than predicted, and football is on. :X3:
@Tundra Tiger
Interesting to see how the go as most Carcano have a 268 bore not a 264. They may rattle a bit like throwing a hot dog down a hallway. Just saying I may be wrong as usual.
Bob
 
That will look nice. What is your plan?
My plan is pretty simple. Taking off the old finish using orange CitriStrip and a nylon brush, then I'll steam out any dents with a wet wash cloth and a clothes iron, then begin sanding it with ever-finer grits of sandpaper (600 - 2,000), replace the recoil pad, hand rub some number of coats of Linspeed oil, then finally some Renaissance gun wax.
 
@Tundra Tiger
Interesting to see how the go as most Carcano have a 268 bore not a 264. They may rattle a bit like throwing a hot dog down a hallway. Just saying I may be wrong as usual.
Bob

Roger that Bob. I was aware, but trying what I have on hand. :p
 
My plan is pretty simple. Taking off the old finish using orange CitriStrip and a nylon brush, then I'll steam out any dents with a wet wash cloth and a clothes iron, then begin sanding it with ever-finer grits of sandpaper (600 - 2,000), replace the recoil pad, hand rub some number of coats of Linspeed oil, then finally some Renaissance gun wax.
@cash_tx
Ive been using linspeed for years. Give an absolutely beautiful finish but takes time. Well worth the effort.
Bob
 
Decided to redo my load development on the 6x45 (6mm - 223) as there are rumors that Alliant Rel X10 won’t be coming into SA anymore.


Using Somchem S335 I’m getting 2600 fps with the SBC .243 85g bullets.

Happy with the accuracy and loaded up 100.

IMG_8375.jpg


IMG_8536.jpg
 
50 rounds of 258gr CEB Raptors for some hog and deer culling.
 

Attachments

  • IMG_7492.jpeg
    IMG_7492.jpeg
    3.2 MB · Views: 12
Just finished up 20 CEB solids and 20 TSX for the 470NE to take to Zimbabwe with me next week for my tuskless and buffalo adventure.
Also will take my 416 Dakota just in case. May be able to chase hyena and eland if time permits.
 
I have a load question for you fine fellers. I have some loads I have worked up for this gun and caliber, but I am always interested in what others have done.

I have a tag for a winter caribou hunt. Terrain is fairly open, but I've had a lot of mid-range shots too. Caliber: .308; gun: a Savage 99E. Powders I have on hand? H335, LEVER, and Varget in abundance, and a handful of others in lesser amounts. Bullets? 150 Partitions, 165 Game Changers, 150 TTSXs, and maybe a few others. Because of where I live I can't just trundle down to the store for other powders.

Again, I have many other calibers (.264 WM, .338 ME, .300 WM, 7mm) suitable for long(ish) range if need be. But I'd really like to pop one with my 99. Any pet loads anyone is willing to share?

Note: it's not all THIS wide open, but this was the last winter caribou I killed, in the same hunt area. It's a little deceptive? There is a bluff and some rolling hills in the other direction. That's Bristol Bay back behind me.

IMG_2457.JPG
 
I have a load question for you fine fellers. I have some loads I have worked up for this gun and caliber, but I am always interested in what others have done.

I have a tag for a winter caribou hunt. Terrain is fairly open, but I've had a lot of mid-range shots too. Caliber: .308; gun: a Savage 99E. Powders I have on hand? H335, LEVER, and Varget in abundance, and a handful of others in lesser amounts. Bullets? 150 Partitions, 165 Game Changers, 150 TTSXs, and maybe a few others. Because of where I live I can't just trundle down to the store for other powders.

Again, I have many other calibers (.264 WM, .338 ME, .300 WM, 7mm) suitable for long(ish) range if need be. But I'd really like to pop one with my 99. Any pet loads anyone is willing to share?

Note: it's not all THIS wide open, but this was the last winter caribou I killed, in the same hunt area. It's a little deceptive? There is a bluff and some rolling hills in the other direction. That's Bristol Bay back behind me.

View attachment 649893
@Tundra Tiger
46-47 gn of varget/ 2208 works well behind the 159 grainers in my sons 308 and less than moa @ 100.
Bob
 

Forum statistics

Threads
57,955
Messages
1,243,912
Members
102,411
Latest member
Hunter Lenardson
 

 

 

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
 
Top