gsdog1
AH senior member
- Joined
- Mar 2, 2023
- Messages
- 63
- Reaction score
- 144
- Articles
- 1
- Member of
- Lifetime NRA, Lifetime SCI, NWTF, ARRL
- Hunted
- Lower 48, Alaska, Canada, and Mexico
To summarize the below:
What: Parkwest Arms SD-76 Dark Continent rifle with NightForce ATACR glass.
Why: I’m heading to Mozambique! First African safari. Most likely not the last.
When: Got my paws on this masterpiece this last weekend, heading on safari this September.
How: Lots of research, reading this sight (!!!!), and engaging with people I trust and respect.
Who: Parkwest Arms located in Sturgis, South Dakota, USA. Tim L,, Wade D., and Justin R. are my primary touch points.
First impressions: simply amazing craftwork, fit and finish, and function upon visual and hands on inspection.
To set the stage, I am heading out on my first African safari this coming September, with a mix of DG and PG on the list. I’m counting days! A very big tip of the hat to members Gary and Dave for getting me scooting in this direction. I’ve been thinking about thinking about going for years to decades now, and from a happenstance meeting with Gary on a Gould’s turkey hunt, I’m now a lifetime member of SCI, and avid reader of AfricaHunting.com.
I tend to use outings like this as my primary rationale to upgrade my hunting gear – optics to clothing to rifles and all in between. For this safari, I wanted to go in with a nod to yesteryear, and a full ration of modern tech. I started my research in earnest well over a year ago as to what platform I was going to go with. As well as caliber selection. I won’t bore with all those details, other than to say I didn’t leave much off of the table of consideration.
I narrowed in on several solid solutions, and am beyond ecstatic to say I am now the proud owner of a Parkwest Arms SD-76 Dark Continent rifle in 375 Holland & Holland.
https://parkwestarms.com/product/dark-continent/
First a point regarding my choice of optics. Through education, and more importantly experience, NightForce was the only optic I considered. I’ve owned everything from Tasco to Leupold to Swarovski to Schmidt and Bender. Not taking anything away from those options or start a ferocious debate. I’ve seen and experienced enough that I am set with my choice of an NF ATACR in 1 x 8 – 24mm F1 with an FC-DMx reticle.
https://www.nightforceoptics.com/riflescopes/atacr/atacr-1-8x24-f1/
In terms of the reticle, it is the only option available in this particular optic. I’m more than good with it, especially after getting my hands and eyes on it. At low power, 1x you get both eyes open operation with a red circle to focus on. At 8x, you effectively get a T-post with red dot aiming point. On the lower end of the magnification, you get a segmented circle with a 4 mil diameter. That’s 7.2” at 100 yards, which is less than the effective kill zone of an African Cape Buffalo at 100 yards presenting broadside. Very helpful aiming benchmark so to speak. Also beats the standard 8” paper plate at 100 yards requirement.
https://www.nightforceoptics.com/technology/reticles/fc-dmx/
I won’t be “milling” anything with this rifle. Disregard the sub-tensions for this platform all together. It’s all about reliability and image quality here.
Now for the SD-76! Some more perspective is in order. The last wood stocked firearm I purchased was my Winchester Model 70 Sporter in 7 RM back in 1994. It’s all been some manner and combination of plastic and fiberglass and carbon fiber since then. For this rifle I am entering it in to the “family heirloom” category. Legacy (?!) to follow. I wanted first and foremost reliability and function. That really is that. I figured a classic safari rifle should be wood stocked by experts. As I sit and type this very sentence, WOW did I get it right. Parkwest started me off with roughly 10 blanks to choose from. My criteria was dark in color and lots of fiddleback. As it turns out the first blank I chose stood the eyeball test over the entire selection process, and it’s absolutely gorgeous as finished.
The rating systems for wood are rather all over with respect to nomenclature. Suffice to say this is an absolute top of the line exhibition grade piece of lumber – special select black walnut. The checkering is simply stated as masterful to my eyes and touch. Beyond my expectations. The craftwork and attention to detail is just flat incredible. And all done by hand. I was given several examples of the patterning and placement, and the end result is as stated. Incredible.
At the heart of the rifle we have the Parkwest Arms SD-76 action with 3 position safety, which I really appreciate and embrace, and perhaps most importantly it sports controlled round feeding. The fit and finish is impeccable, graphite on glass smooth operation of the bolt, clean lockup and relief upon working the bolt to full stop and back again.
The bottom metal is a hinged inside the trigger guard release drop with sprung floorplate. Fit, finish, function perfect. The barrel is a premium stainless steel with button rifling in a 1:12, as a nod to the past as well as mating up with like on like materials at the threads with the receiver.
I went with Talley quick disconnect rings so as to be able to go to irons if / as needed, and subsequently return to glass with no shift in POA / POI. Field testing to be conducted over the next month with purposeful practice to follow.
All the metal was case hardened, and it looks fantastic! I also adorned the stock grip cap with initials, and went with a custom serial number.
The rifle was field tested for function and initial accuracy with a total of 17 rounds down range. The targets I received all showed ~ ¾ minute accuracy at 100 yards, and a little over that right at 1 MOA with irons at 50 yards. The bar has been set, and it’s now up to me to get soft points and solids to near same POI at 100 yards and be minute of buffalo inside that.
Next steps are to start with several loads I have information for from members here as well as Parkwest. Huge leg up on load development. I will be using several different bullets with a heavy eye on CEB 300 grain Safari Solids and the quintessential Swift A-Frames in 300 grains as well.
https://cuttingedgebullets.com/products/375-300gr-300gr-safari-solid?_pos=1&_fid=7c1a5b680&_ss=c
https://www.swiftbullets.com/collec...-bullets/products/a-frame-heavy-rifle-cal-375
Powders to be checked and run include Varget and IMR 4350. I’ll be using Winchester large magnum rifle primers as that’s what I have on hand, and new Norma brass. Results to follow.
In closing, I would definitely attest that the Parkwest of today keeps the quality, fit, and functionality of Dakota. Accuracy at present more than satisfactory per the range testing, and as noted above I’ll be dialing that in. None of that other big green company’s misgivings or misfortunes rubbed off. I will definitely buy another one in due time.
In Hunting –
Matt
What: Parkwest Arms SD-76 Dark Continent rifle with NightForce ATACR glass.
Why: I’m heading to Mozambique! First African safari. Most likely not the last.
When: Got my paws on this masterpiece this last weekend, heading on safari this September.
How: Lots of research, reading this sight (!!!!), and engaging with people I trust and respect.
Who: Parkwest Arms located in Sturgis, South Dakota, USA. Tim L,, Wade D., and Justin R. are my primary touch points.
First impressions: simply amazing craftwork, fit and finish, and function upon visual and hands on inspection.
To set the stage, I am heading out on my first African safari this coming September, with a mix of DG and PG on the list. I’m counting days! A very big tip of the hat to members Gary and Dave for getting me scooting in this direction. I’ve been thinking about thinking about going for years to decades now, and from a happenstance meeting with Gary on a Gould’s turkey hunt, I’m now a lifetime member of SCI, and avid reader of AfricaHunting.com.
I tend to use outings like this as my primary rationale to upgrade my hunting gear – optics to clothing to rifles and all in between. For this safari, I wanted to go in with a nod to yesteryear, and a full ration of modern tech. I started my research in earnest well over a year ago as to what platform I was going to go with. As well as caliber selection. I won’t bore with all those details, other than to say I didn’t leave much off of the table of consideration.
I narrowed in on several solid solutions, and am beyond ecstatic to say I am now the proud owner of a Parkwest Arms SD-76 Dark Continent rifle in 375 Holland & Holland.
https://parkwestarms.com/product/dark-continent/
First a point regarding my choice of optics. Through education, and more importantly experience, NightForce was the only optic I considered. I’ve owned everything from Tasco to Leupold to Swarovski to Schmidt and Bender. Not taking anything away from those options or start a ferocious debate. I’ve seen and experienced enough that I am set with my choice of an NF ATACR in 1 x 8 – 24mm F1 with an FC-DMx reticle.
https://www.nightforceoptics.com/riflescopes/atacr/atacr-1-8x24-f1/
In terms of the reticle, it is the only option available in this particular optic. I’m more than good with it, especially after getting my hands and eyes on it. At low power, 1x you get both eyes open operation with a red circle to focus on. At 8x, you effectively get a T-post with red dot aiming point. On the lower end of the magnification, you get a segmented circle with a 4 mil diameter. That’s 7.2” at 100 yards, which is less than the effective kill zone of an African Cape Buffalo at 100 yards presenting broadside. Very helpful aiming benchmark so to speak. Also beats the standard 8” paper plate at 100 yards requirement.
https://www.nightforceoptics.com/technology/reticles/fc-dmx/
I won’t be “milling” anything with this rifle. Disregard the sub-tensions for this platform all together. It’s all about reliability and image quality here.
Now for the SD-76! Some more perspective is in order. The last wood stocked firearm I purchased was my Winchester Model 70 Sporter in 7 RM back in 1994. It’s all been some manner and combination of plastic and fiberglass and carbon fiber since then. For this rifle I am entering it in to the “family heirloom” category. Legacy (?!) to follow. I wanted first and foremost reliability and function. That really is that. I figured a classic safari rifle should be wood stocked by experts. As I sit and type this very sentence, WOW did I get it right. Parkwest started me off with roughly 10 blanks to choose from. My criteria was dark in color and lots of fiddleback. As it turns out the first blank I chose stood the eyeball test over the entire selection process, and it’s absolutely gorgeous as finished.
The rating systems for wood are rather all over with respect to nomenclature. Suffice to say this is an absolute top of the line exhibition grade piece of lumber – special select black walnut. The checkering is simply stated as masterful to my eyes and touch. Beyond my expectations. The craftwork and attention to detail is just flat incredible. And all done by hand. I was given several examples of the patterning and placement, and the end result is as stated. Incredible.
At the heart of the rifle we have the Parkwest Arms SD-76 action with 3 position safety, which I really appreciate and embrace, and perhaps most importantly it sports controlled round feeding. The fit and finish is impeccable, graphite on glass smooth operation of the bolt, clean lockup and relief upon working the bolt to full stop and back again.
The bottom metal is a hinged inside the trigger guard release drop with sprung floorplate. Fit, finish, function perfect. The barrel is a premium stainless steel with button rifling in a 1:12, as a nod to the past as well as mating up with like on like materials at the threads with the receiver.
I went with Talley quick disconnect rings so as to be able to go to irons if / as needed, and subsequently return to glass with no shift in POA / POI. Field testing to be conducted over the next month with purposeful practice to follow.
All the metal was case hardened, and it looks fantastic! I also adorned the stock grip cap with initials, and went with a custom serial number.
The rifle was field tested for function and initial accuracy with a total of 17 rounds down range. The targets I received all showed ~ ¾ minute accuracy at 100 yards, and a little over that right at 1 MOA with irons at 50 yards. The bar has been set, and it’s now up to me to get soft points and solids to near same POI at 100 yards and be minute of buffalo inside that.
Next steps are to start with several loads I have information for from members here as well as Parkwest. Huge leg up on load development. I will be using several different bullets with a heavy eye on CEB 300 grain Safari Solids and the quintessential Swift A-Frames in 300 grains as well.
https://cuttingedgebullets.com/products/375-300gr-300gr-safari-solid?_pos=1&_fid=7c1a5b680&_ss=c
https://www.swiftbullets.com/collec...-bullets/products/a-frame-heavy-rifle-cal-375
Powders to be checked and run include Varget and IMR 4350. I’ll be using Winchester large magnum rifle primers as that’s what I have on hand, and new Norma brass. Results to follow.
In closing, I would definitely attest that the Parkwest of today keeps the quality, fit, and functionality of Dakota. Accuracy at present more than satisfactory per the range testing, and as noted above I’ll be dialing that in. None of that other big green company’s misgivings or misfortunes rubbed off. I will definitely buy another one in due time.
In Hunting –
Matt
Attachments
-
375 Solid Brass Bullet 375 H&H.pdf1.4 MB · Views: 41
-
A-Frame Heavy Rifle Bullets Cal. 375 | 300 gr – Swift Bullet Company.pdf595.4 KB · Views: 27
-
ATACR - 1-8x24mm F1 - Nightforce Optics.pdf1.3 MB · Views: 87
-
FC-DMx - Nightforce Optics.pdf834 KB · Views: 35
-
SD-76 Dark Continent™ Bolt Action Rifle – Parkwest Arms.pdf2.6 MB · Views: 36