AZDAVE
AH legend
- Joined
- Jul 26, 2013
- Messages
- 3,998
- Reaction score
- 8,239
- Media
- 200
- Hunted
- South Africa,Namibia, Alaska,lower 48
I looked at my quick load program (A little older version) it didn't have Rhino bullets listed (The manufacture is Rhino correct?)
So I looked up the two closest in weight that I could find. Kept the loads below MAX pressures.
Using woodleigh 350gr welded core RN 46D 81gr S365 in a 24in barrel . 2495FPS at 60254psi chamber pressures (these are estimates)
woodleigh 350gr welded core 46C, 82gr S365, 24in barrel 2500FPS at 61169 psi
Barnes 350gr banded solid 81gr S365 24 in barrel 2494FPS at 59713psi
The other two powders were way to fast and pressures were through the roof.
You should be able to get 2300FPS or real close and keep the pressures below max, however every gun has its own personality. The standard safety tip to start 10 % below and workup carefully.
I happen to be one of the guys that like AI chambers and don't worry about resale.. As others have pointed out if it doesn't work you can always rebarrel to a 404.
Good luck on your project
So I looked up the two closest in weight that I could find. Kept the loads below MAX pressures.
Using woodleigh 350gr welded core RN 46D 81gr S365 in a 24in barrel . 2495FPS at 60254psi chamber pressures (these are estimates)
woodleigh 350gr welded core 46C, 82gr S365, 24in barrel 2500FPS at 61169 psi
Barnes 350gr banded solid 81gr S365 24 in barrel 2494FPS at 59713psi
The other two powders were way to fast and pressures were through the roof.
You should be able to get 2300FPS or real close and keep the pressures below max, however every gun has its own personality. The standard safety tip to start 10 % below and workup carefully.
I happen to be one of the guys that like AI chambers and don't worry about resale.. As others have pointed out if it doesn't work you can always rebarrel to a 404.
Good luck on your project