Hornady CX

I kinda wonder how those would do on Buffalo. I know that the conventional wisdom is 300Grain bullets...but the monometals are large for weight anyway and the increased velocity should make up for it, penetration wise. I think that bullet would equal a 300 grain lead core and should be good for buff.
I think you’re probably correct as monometals penetrate above their weightclass. I would like to see some evidence that the CX bullet is as well constructed as BARNES however. I wouldn’t be the first to try it out on a buffalo. I choose 300gr Barnes softs/solids for my upcoming trip to Zimbabwe. it’s hard to not take something so proven.

Buffalo Bore makes an interesting 270gr monometal flat point option too.
 

Attachments

  • Screen Shot 2022-05-05 at 7.12.11 AM.png
    Screen Shot 2022-05-05 at 7.12.11 AM.png
    1.3 MB · Views: 161
  • Screen Shot 2022-05-05 at 7.12.12 AM.png
    Screen Shot 2022-05-05 at 7.12.12 AM.png
    1.6 MB · Views: 145
  • Screen Shot 2022-05-05 at 7.12.15 AM.png
    Screen Shot 2022-05-05 at 7.12.15 AM.png
    1.9 MB · Views: 138
  • Screen Shot 2022-05-05 at 7.12.18 AM.png
    Screen Shot 2022-05-05 at 7.12.18 AM.png
    1.2 MB · Views: 165
I think you’re probably correct as monometals penetrate above their weightclass. I would like to see some evidence that the CX bullet is as well constructed as BARNES however. I wouldn’t be the first to try it out on a buffalo. I choose 300gr Barnes softs/solids for my upcoming trip to Zimbabwe. it’s hard to not take something so proven.

Buffalo Bore makes an interesting 270gr monometal flat point option too.
I'd want to try it out first up close on something like a 500 lb cow elk, or plains game of same size or larger and hopefully recover the bullet. I'm thinking cow elk because where I hunt sometimes you can put the Big Sneak on and get within buffalo range.
 
What animals did you take? and which did you recover the bullets from? Have had very good luck with the GMX bullets, wondering if the CX is the updated form of the GMX.
 
Signed in. I’m wondering if there a little softer Barnes ttsx? Might open up a little better at lower velocity’s.
I know I'm late answering your post and you probably know by now, just in case, Barnes LRX bullets have a higher ballistic coefficient than the TTSX. The LRX doesn't require the same velocity to expand and it extends your hunting range by about a couple of hundred yards. They tend to lose petals if they hit a target at high speed but penetrate every bit as well as the TSX and TTSX.
 
That’s good info. Thanks!
 
What animals did you take? and which did you recover the bullets from? Have had very good luck with the GMX bullets, wondering if the CX is the updated form of the GMX.
I took an Impala, Eland, Wildebeest and Gemsbok. and yes I think it is a updated GMX, as I've used them too with the same results.
 
I've been on two hunts where they were used last year. They don't expand as much as TSX was what I noticed.
 
If you hit bond with these bullets exit holes are large. Here a warthog with a 375 @ 855m/s
 

Attachments

  • IMG_1489.jpeg
    IMG_1489.jpeg
    5.8 MB · Views: 43
I used them in my 30-06, 180 grain. I thought they performed great on Sable and Gemsbok. My 375 did not like the 250 grain outfitter CX so I went back to 300 grain barnes.
 
I loaded the GMX in my 375 Dakota. Wanted to shoot up to 400 yards. They really did well on the plains game I hunted. Would definitely recommend. Have not tried the new CX bullets but it’s sounds like they would perform similar.
 
Apologizing in advance for the poor picture quality.

The bullet at the top is a 338 win mag Hornady 225 CX taken out of a gemsbok shot at 150 yards. The middle one is a 338 win mag 185 grain Barnes TTSX taken out of an aoudad at about the same distance. The one with no pedals is a 300 win mag 180 grain Hornady TTSX and I can't remember what I shot with it.

The CX and TTSX both expanded well with maybe the TTSX a little more. The 185 TTSX is a hand load and it was screaming so that may be why. The TTSX is redish in color and the CX more yellow, maybe that tells something about the alloy.

I have taken 8 African animals with the 185 grain 338 TTSX, 9 with the 180 TTSX 300 win mag, 2 with a 180 grain TTSX in 30-06, and 2 with the 225 grain CX along with a bison, and a very large black bear. All were one shot kills except for a blue wildebeest I shot with the 30-06 that I had to shoot four times due to a flubbed first shot. None exited and the bullet was usually under the skin on the far side.

The 185 grain Barnes TTSX hand load is my favorite.
 

Attachments

  • IMG_1059.jpeg
    IMG_1059.jpeg
    2.1 MB · Views: 12

Forum statistics

Threads
64,146
Messages
1,412,990
Members
128,937
Latest member
TraciVandi
 

 

 

Latest profile posts

Beautiful Aardwolf for our Spanish client and good friend Alberto
WhatsApp Image 2025-11-12 at 17.27.22 (2).jpeg
C-YA-L8R wrote on PaulB's profile.
Hi PaulB,
I have a Ballard Arms Model 1885 chambered for .333 Jeffery Flanged. Do you have any idea where I can get ammo for this?

I am new to this forum so I am sorry if I am doing something wrong!
Thank You!
Bruce D
Lakewood Village, California

BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (1).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (2).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (11).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (5).jpg
STARCHEDUPDAD wrote on Acopperdawg's profile.
what's up buddy how are you doing today
Updated available dates for 2026!

1-27 feb is open
13-31March is open
1-10 April is open
17-30 April is open
1-6 May is open
24-31 May is open
12-18 June is open
24-30 June is open
1-17 July is open
August is now fully booked
7-30 September is open
October is wide open

Get your hunt booked today!
 
Top