Which .416 and why?

My favorite cartridge is the 404 Jefferys, but thats mostly nostalgia on my part...It is also expensive to build and is more costly than the others you mention..

The .416 Rem. or the 416 Ruger is a perfect choice for anyone to shoot the largest game on this planet..

I don't like the .416 Rigby because if I have to use and action/rifle that big then I would opt to make it a 500 of some sort. I don't approve of building 416 Rigbys on standard size 98 actions as you must remove too much metal IMO, it has been done, but its a poor practice IMO, and why would you when you can get the same ballistics with a smaller case like the 416 REm or Ruger.

I guess if push came to shove the .416 Rem. would still be my choice. It has served me so well that it would be hard to say anything bad about it...
 
BangFlop . . . without a doubt all of the calibers you mentioned are fine hunting cartridges and capable of dispatching the largest of game. However, I do agree with Ray that from a practical point of view it’s pretty hard to beat the .416 Rem.
 
shooting big recoil guns

I have tested many magnums in order to get into what you would call a stoper minium caliber 416. I like and own 416rem. in model 70. recoil -two things- bullet weight and stock design the cz 550 seem to all shoot very good as do the winchesters. After your sighted in you should practice off hand or on stix you will not have a problem with recoil.I have a model 70 safri express 416 rem. mag for sale action has been glass beded this one shoots verry good with hand loads 400 gr. bear claw and hornady solids same point of impact barnes solids also shot good rifle has leupold 1.75 / 6 with german #4 reticle this is a real good set up all amo goes with rifle 1 box bear claw 3box solids $ 2200 with realod resipe extra brass avalible
 
Which 416

I returned from Africa last October where I spent 6 days in South Africa and 12 days in Zimbabwe an experience all hunters should try to achieve in their lifetime. I went with a friend and we both took 416 Rigby's. Mine was a CZ 550 with bedded action my friend Chris took a HS Precision. This was great because if something was lost for one of us it could be covered by the other. So my recommendation is take a buddy with similar goals.

We chose the Rigby because it is usually loaded down for comfort and reliability. However in reloading tests we found that the Rigby still had incredible performance up its sleeve and turned out to be one of the best long range performers I have ever had the pleasure to deal with. Our loads were identical for both rifles and we used GS Custom's 330 grain HV projectile with drive band technology. The drive bands allow this solid copper hollow point projectile to operate at incredible lower pressure than any other commercial projectile and the hydraulic damage done to the 25 animals taken on our safari by this projectile was amazing. Even our PH's had not experienced anything like it and the bullets are made in South Africa.

Our specific hand load was 112 grains of ADI 2209 a favorite here in Australia. It is in the H4350 burning range. In fact ADi make Hogdens powders so it may be the same powder with the exception of batching variations. This is a compressed load but there was little sign of pressure until we reached 113.5 grains of 2209.

At 112 grains the 330 grain GS Custom projectile leaves the CZ barrel at 2975 fps and the HS Custom Barrel at 3050 fps. It produces and incredible 7,000 foot pounds of energy at the barrel with obviously devastating effect on the wild life. Mind you it was equally sore shoulder material when sighting it in but well worth the effort. This makes the Rigby not only a great dangerous game rifle but also twice as good as any high velocity 30 cal. on plains game.

Accuracy was also very good with the HS PRecision shooting its best group of 1.8 inches at 300 yards and the CZ 2.215 inches at 300 yards.

Whist on the African continent we felt just as confident to tackling buffalo and elephant as we did on plains game. Do not believe what your told about too much power because once your there you will not flinch because of power as your heart will already be racing with the excitement of the hunt.

I have just received my new 416 Ruger in 416 which I will be working with developing loads using the same GS Custom projectiles. This rifle will go to Canada this year with me for Moose, Black bear, Elk and Whitetail. Can't wait.

In any case good luck in Africa and I am sure it will be an everlasting memory regardless which cartridge you take with you.
 
Thanks heaps everyone for all the great first-hand info. I will let everyone know what I eventually acquire. In the mean time - shoot straight!
 
My first post aside, and I will always be a .416 Rem. fan, but I think the .416 Ruger may have the brightest future of them all..It has a bunch to offer, ammo is cheap, brass is available, bullets available, short action, light rifle, same balistics as the .416 Rem, and Rigby, same recoil.

It really has a lot going for it..I wouldn't run out and sell my .416 Rem or 404 Jefferys to buy one, but if I was looking for a .416 I would surely give the .416 Ruger a close look, and in fact, it would probably be my choice today..
 
Ray,

Right now a Ruger Hawkeye Alaskan in .416 Ruger is at the top of my list. Hard to knock the quality of the Hawkeye or the price and availability of the ammo (at least in the U.S.). The package I am looking at would get me a rifle, QD scope mounts, low power scope and 200 rounds of ammo for just under $1400.

Now all I need is to get the 1400 clams ... thanks for your input. :)
 
BangFlop, it appears you have made you decision and I know it will serve you well. I was late to this thread so I must put in my two cents:) and support the 416 Taylor. It did a great job for me last year on Elephant and Hippo. The recoil is very managable and with a composite thumb hole stock is not hard to carry.
 
DOJ,

I do like the 416 Taylor and the 404 Jeff - if I were to find a great deal on one of these before I got my Ruger (a year or two away from that) it would be awfully hard not to snatch it up ....

Thanks :)
 
Let's hear it for the 416 Rigby!

Every 416 cartridge measures itself against the 416 Rigby and they all strive to equal or better it, although none of them has made any advance of any significance. The fact that the 416 Rigby is still going strong after 98 years speaks for itself.

This is a cartridge that has it all: reliability, punch, reliability, accuracy, reliability, pedigree, reliability, low-pressure. The recoil is a shove, which is easy to absorb, rather than the hard punch that the other 416's give.

416 Rigby ammunition is loaded by a good range of manufacturers and there are plenty of formulae available for the hand-loading enthusiast. You'll also have a better chance of picking up 416 Rigby ammunition in the more obscure parts of Africa.

When hunting Dangerous Game, the number one priority is reliability and this gives the 416 Rigby an unreachable edge the other contenders. It just will not let you down.

416 Weatherby? - Brutal to handle and unnecessarily fast. 416 Remington? - Bigger recoil and only marginally greater speed claimed. 416 Dakota? - Bigger recoil, marginal greater speed claimed. 416 various wildcats? - Virtually identical balistics and no pedigree.

I think that whether you are hunting Lion, Elephant or Buffalo, a 416 Rigby with a Mauser action is without doubt the best of the 416 stable. It will not leave you holding a jammed gum while you stare at the approaching enraged beast. It's also a great single safari rifle because it will reach out and take smaller game with accuracy. I have a 416 Rigby which I had made by W Jeffery; it is a great gun. Let's hear it for the 416 Rigby
 
I agree with Outback boy, the 416 Rigby, even with 400 gr. bullets can produce 416 Wby muzzle velocities as it is nothing more than a 416 Wby with the belt removed..

However it is traditionally loaded at .416 Rem. and 416 Ruger velocity of a 400 gr. bullet at 2400 FPS, that is the African standard that has proven itself for many years now..

Based on that and scrapping all the hype, they are all equal and the Rem and Ruger can be built much lighter on smaller actions..To build a .416 Rigby on a std. Mauser 98 action is not a particularly good idea as one must remove too much metal in the front of the action and too much in the rear to take the massive cartridge that it was not designed for..It has been done and was done a few times by Westley Richards but it is frowned upon by the experts.
The Rigby shoud be built on the CZ or a Magnum Mod. 20 mauser type action.

My other issue with the .416 Rigby is if I have to build a rifle with that big action and that heavy, then I would probably opt for a 500 Jefferys or even a 505 gibbs as the action is big enough for the biggest of big bore bolt calibers.

Not saying the 416 Rigby isn't a grand caliber and I know it works, but it is an old round and outdated IMO unless you can stand the recoil and load it to the gills, and with some attention to performance such as Outback boy does his, then it is something to behold, but only a very few actually do that as recoil becomes a real problem for most of us at those velocities.

If your a nostalgic then it has its place, much the same as I am with my 404 Jefferys, but I don't kid myself about its pros and cons just because I have one..I know under normal circumstances the 416 Rem or Ruger will do exactly the same thing and the same goes for the 416 Rigby.

Just a different perspective on the subject.
 
I am in the process of collecting the necessary resources and equipment for my first African hunting experience (1st of many I hope). After much thought, I believe for a dangerous game rifle, I will skip the 375 and go for a 416 (don't have the money for a double - will stick to bolt action). But which one? If anyone with experience would be gracious enough to comment on their preference and why that caliber over the others, I would greatly appreciate it.

Here are my current choices:
416 Ruger
416 Rem Mag
416 Rigby
404 Jeffery (not a 416 but on my short list)

Thanks!:cool:

I think the choice should be made on what sort of game you are hunting. Unless you are chasing DG then a 416 is probably on the too large side. However if you are going for DG and depending in which country, I would check what ammo is the easiest to obtain, but I would think 416 rigby would be the go.
 
Hello There,
After being a FFL dealer for 23 years and hunting all over the world I will offer my opinion for your question. If I were you,I would purchase the Ruger in 416 Rigby. This is an excellent rifle for the price and the 416 is a fantastic cartridge. Bear in mind that the Rigby round operates at very low pressures and you will NEVER have sticky extraction in the hot climate of Africa. If you don't reload, you may want to consider this as an excellent addition to your hobby! You will save a "pile" of money and will enjoy "rolling your own"! You may also find that your hand loads will be more accurate than those purchased over the counter. I hope that I have helped you in your choice of calibers and that you have a fantastic hunt in Africa.
 
Nitro476

Your post just made me even happier with my recent rifle choice!

I bought a Ruger 77RSM in .416 Rigby and I'm hand loading for it. The rifle's balance, accuracy and quality are everything that I hoped they would be. So far, loading for it is proving no more difficult than any other caliber.

If I get 4 loadings out of a piece of brass, it's only going to cost about $2.25 a shot with premium bullets.

- browningbbr
 
... If you don't reload, you may want to consider this as an excellent addition to your hobby! You will save a "pile" of money and will enjoy "rolling your own"! ...

nitro476 excellent advice. I like that "rolling your own"! :joint:
 
I'm absolutely no big-bore expert, but I'm casting my vote for the .416 Rigby. Why? Because there is nothing wrong with it, it's big enough for the job, I don't have to walk a thin line with pressures when handloading, it's got an outstanding history in Africa, and because it's simply a lot of fun to plunk one of the rounds down in front of your buddies, especially when they ask what made that divot in your forehead. Actually that last part hasn't happened yet, but it's something that might someday.
 
416 Taylor goes in a standard Mauser M98 action, this makes for a reasonable priced custom build Safari rifle.
 
Any of the choices you list will take care of business! That part of your question is answered by a simple "IT'S A MATTER OF PERSONAL CHOICE"

More improtantly is the RIFLE you get your choice in!

IMO, no bolt rifle used for dangerous game should ever have a PUSH FEED action! Leave the push feeds in Wal-mart, that's where they belong!

That said, if you are thinking of factory rifles, then the above sentence limits your choices to Ruger, CZ,Winchester which are the most available. Which also limits your choices to 416 Rigby, 416 Ruger, and 416 Rem Mag in a model 70. The 416 Rem Mag will be the easiest to find ammo for just about anyplace. The 404 Jeffery is a very good choice for the job, but ammo availability can be a problem if you ammo gets lost. Not only that you will have use a CZ 550, or find a used one or build one on a good CRF action.

For the handloader the any .416 is a fine choice because of the availability of bullets made by many bullet makers, Even though I'm not personally a .416 fan, and of the choices you list my personal favorite is the 404 Jeff, chambered in CZ 505, or a good Mauser CRF action, with a converted Mod 70 type safety, and a Timmny trigger. Quality Express iron sights, and a Trijicon 1.4-4X24 scope, in quality quick detach rings and bases, with a stock shaped so the irons can be used.

.......................just one man's opinion, other mad do as it suits ! :2c:
I think the same as DUGABOY.
I use Mauser M98 in 404Jeffery. This is a very good calibre.
I use cartridge from RWS, Hornady and NORMA.
Good luck and all the best in Africa.
witold
 
Looked at all of the .40 cal rifles a couple of years ago going through the very same process, settled on the 400H&H....
Go figure
 

Forum statistics

Threads
57,661
Messages
1,236,836
Members
101,576
Latest member
unifinerds
 

 

 

Latest posts

 
Top