The 400 H&H

I do own a Dakota 400 H&H. I have enjoyed the rifle and the cartridge. By the numbers it lands between my 375H&H and 416REM, both in kinetic energy and felt recoil. In my experience the 416REM sends the bullet at about 2-300 fps faster than the 400H&H. It's a little difficult at times to find brass and bullets, but it has been a fun and very usable cartridge for me over the years.
That’s unfortunately not what I wanted to hear but I thank you for the feedback! I was hoping that it would be in the same class as the 416’s and be able to send a 400gr at 2300ftps…
Now I’m sure it gets the job done quite well at 2100 to 2200 but as you say it’s in between and not in the same class..
The Westley Richards head of sales for the US “LD”, who I met at this past DSC convention in his booth, gave a statement on it in an article written by a noted gun and hunting writer, this is that article.
Never the less I was hoping for better feedback on its performance

 
No, completely different, it’s basically a 275H&H necked down to 257 cal. Slightly sharper shoulder, but still belted. They only made a couple of hundred of them
Gumpy

 

Attachments

Thats the falling block rifle, my barrel is for a mauser action. I should get it bore scoped to see if it's been shot out
gumpy
 
My chronographed load using IMR4064 gives me 2434, a standard deviation of 10 with a 5 shot group and very good accuracy from my 400. Results are very similar to my 416 REM using No Fork SS for both, accuracy is slightly better than the 416, recoil in my opinion is noticeably less. I like the long neck of the 400 as I don’t have to crimp. It feeds extremely smooth. I’ve not had any pressure sings with the 400 HH.
 
For Africa I am shooting 400gr CEB Solids and 370gr Safari Raptors in my 400 H&H
I am comfortably loading the 400gr Solids at 2400fps for 5000ftlbs of energy and the 370's around 2450 ...
 
I’ve only ever seen them in actual H&H rifles costing $50k+
One COULD build a .465 H&H on a P14 action if you could find the reamers and dies for it? I guess the parent case is the .378 Weatherby, so cases would be available for reloaders.
 
My chronographed load using IMR4064 gives me 2434, a standard deviation of 10 with a 5 shot group and very good accuracy from my 400. Results are very similar to my 416 REM using No Fork SS for both, accuracy is slightly better than the 416, recoil in my opinion is noticeably less. I like the long neck of the 400 as I don’t have to crimp. It feeds extremely smooth. I’ve not had any pressure sings with the 400 HH.

For Africa I am shooting 400gr CEB Solids and 370gr Safari Raptors in my 400 H&H
I am comfortably loading the 400gr Solids at 2400fps for 5000ftlbs of energy and the 370's around 2450 ...
This is what I was hoping to hear!
 
Holland & Holland is one of the major reasons British calibers were such a huge success in Africa compared to many anemic continental cartridges. They WORKED. THEY STILL DO. If the 400H&H was the first to fill the niche, it would already have the reputation the 404 Jeffrey has! If you want it, find a way to make it happen. (sadly, for me, that would be the custom route, not an actual H&H; no use pretending otherwise...)
That's a fine, knowledgeable review by MBaugh.
 
Holland & Holland is one of the major reasons British calibers were such a huge success in Africa compared to many anemic continental cartridges. They WORKED. THEY STILL DO. If the 400H&H was the first to fill the niche, it would already have the reputation the 404 Jeffrey has! If you want it, find a way to make it happen. (sadly, for me, that would be the custom route, not an actual H&H; no use pretending otherwise...)
That's a fine, knowledgeable review by MBaugh.
I have a line on a Custom Pre-64 Winchester in 400 H&H for a good price…
 
Am I crazy for wanting one?
Is that one question or two? :D

I gave serious thought to having my .375 barrel bored out to .400 but ultimately decided not to, due to the wider availability of .375 ammunition and components.
 
The 400 H&H is in the same class as the 404 Jeff, If I didn't have the 404, I'd look at a 400 H&H. Brass may be a problem, though.
 
The 400 H&H is in the same class as the 404 Jeff, If I didn't have the 404, I'd look at a 400 H&H. Brass may be a problem, though.
I called Hedershots and they have a bunch of correctly stamped 400 H&H brass and ammunition in stock
Now how long will that last?
 

Forum statistics

Threads
57,087
Messages
1,222,137
Members
100,093
Latest member
GracielaSi
 

 

 

Latest profile posts

EC HUNTING SAFARIS wrote on MarcoPani's profile.
Happy Birthday, from Grahamstown, South Africa.
I hope your day is great!
Cheers
Marius
EC HUNTING SAFARIS wrote on Ilkay Taskin's profile.
Happy Birthday from Grahamstown, South Africa! I hope you have a great day!
Cheers, Marius
idjeffp wrote on Jon R15's profile.
Hi Jon,
I saw your post for the .500 NE cases. Are these all brass or are they nickel plated? Hard for me to tell... sorry.
Thanks,
Jeff [redacted]
Boise, ID
[redacted]
 
Top