Scope ring height question

[Roland Robinson]

I need to mount a Leupold VX5 2-10x42 (thank you Mark Biggerstaff) on a Win 70 .375 H&H.

The rifle came with Leupold two piece QR bases so I figured I’d take the path of least resistance and order Leupold QR rings.

Using AI to crunch the numbers, the recommendation was for 30mm HIGH rings providing 4-5mm clearance from the barrel. Medium rings at least according to Grok ai provide less than one mm of clearance.

Can anyone confirm that High rings are the correct thing to order? Am I going to be craning my neck?

Is there a smarter solution?

 

[YancyW]

There is no way you need high rings for a 42mm scope.

I would add, the trend in the tac world is to move to taller rings, this is especially true for LPVO and red dots. But for your purpose, not really apples to apples.

 

[ftrovato]

Medium. Leupold has tools on their website to assist.

 

[RR 314]

There is no way you need high rings for a 42mm scope.

I agree. No way you need high. Mediums will work and I don't trust that AI chick. . may even get away with low (but unlikely).

 

[USN]

Just ask Mark, he hooked me up not only with scope but rings and bases for my model 70. He is the go to guy for scope questions

 

[Roland Robinson]

I just found the pull down menu on Leupold. It calls for medium rings. Don’t trust AI!

 

[YancyW]

I need to mount a Leupold VX5 2-10x42 (thank you Mark Biggerstaff) on a Win 70 .375 H&H.

The rifle came with Leupold two piece QR bases so I figured I’d take the path of least resistance and order Leupold QR rings.

Using AI to crunch the numbers, the recommendation was for 30mm HIGH rings providing 4-5mm clearance from the barrel. Medium rings at least according to Grok ai provide less than one mm of clearance.

Can anyone confirm that High rings are the correct thing to order? Am I going to be craning my neck?

Is there a smarter solution?

I've thought more about this, normally the difference in height of medium to high rings is .1". So if that is true for the Leupold rings, that would at max mean the a difference of 2.5mm.