Scope choice for a Ruger #1

Andrews

AH member
Joined
Jan 5, 2014
Messages
32
Reaction score
27
Media
3
I picked up a Boddington edition Ruger #1 about 6 months ago chambered in 7x57. I've been getting used to the rifle by using irons and shooting out to 100 yards. I am wanting to scope it now though and need some advice for a scope. With the somewhat more forward mounts of the #1, what scope do yall recommend? Wanting no more than 8 or 9 maximum and the lighter weight the better. Thanks
 

Attachments

  • Screen Shot 2018-08-03 at 12.08.01 PM.png
    Screen Shot 2018-08-03 at 12.08.01 PM.png
    576.2 KB · Views: 308
I have that same rifle. One of my favorites. Incredibly effective with 175gr Partitions. This is a Leupold 1.5-5 in Leupold Low Matte rings. Like my scopes mounted low. I swapped the fixed rear Boddington sight for a standard folding No 1 sight. Perfect eye relief and no need for extension rings. 5x has proven to be plenty of magnification for my hunting out to 250 yards. Just returned from a hunt in So Africa with this rifle. What a pleasure to carry.

zzhD3GOrRyK4GxSEzkZ16g.jpg
 
Without knowing what you plan on doing with the rifle or how well is shoots is hard to pass on good advice. Personally I wouldn't spend a lot of money on a scope for a rifle that wouldn't shoot a minute of angle, now if it puts three shoots thru one hole at 100 yards it's time to talk serious glass.
 
A08ABF27-294D-4FCF-AF44-F1EB3FD38534.jpeg
Doesn’t sound like this is your scope but the reason I am posting is so you can see the rings that Ruger makes that set any scope back for you.
 
I think you have the power range about right but it depends what you plan on using it for. Based on the attributes of the round, a 2.5-8X Leupold would probably be my first choice, but a 1-6X Swarovski or Zeiss would be a heck of a combo if you wanted top end glass.
 
Thanks for the advice everyone, I've been learning towards the Leupold 1.5x5. I envision the rifle as being mostly just a spot and stalk whitetail setup. I had a VX3i 3.5-10x40 laying around I threw on just to see how it felt and I have to creep up the stock to get a good sight picture. It may be the detachable Talley rings that came with the rifle though. They seem a bit taller than I like.
 
Agreed. I found the Talley’s to be too high and force an awkward check weld. I have 2 No 1s with Leupold 1.5-5s and they both shoot MoA out to any reasonable hunting range. The scopes have proven to be 100% reliable despite numerous flights. The low Leupold rings and folding rear sight are the ticket. Good luck.
 

Forum statistics

Threads
64,523
Messages
1,420,831
Members
130,810
Latest member
PhyllisT31
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top