NORMA 204 Equivalent? please help

charlieB12345

AH senior member
Joined
Sep 13, 2023
Messages
84
Reaction score
126
Media
1
Hunting reports
USA/Canada
1
Hey all i have Developed an amazing round using norma 204 But for the last 3 years, haven't been able to find any powder. Anyone have any experience. What's an equivalent powder to 204?
 
Difficult because it is a double base powder produced by Bofors in Sweden. The equivalent is almost the R904 from Rottweil, which comes from the same manufacturer, but is probably difficult to obtain from you. Some Reloder powders from Alliant are very comparable to Norma powder, although there are hardly any equivalents to Norma 204 except perhaps Reloder 17, but I have no experience with this powder. RS60 from Reload Swiss could also possibly come into question but very different as far pressure is considered. In this case you can ask Reload Swiss for loading data. They are very ready to help.

Look at the equivalent table from Norma, but single base powders IMR from Dupont or from Hodgdon are out of the question.

 
Last edited:
I would look for some load with IMR 4350
In my 8x68S both are good
Sure they're not interchangeable, but probably usable for the same class of cartridges
 
I have loaded some cartridges with R904 and achieved similar results by loading the same cartridges with powder such as the IMR 4350 or the almost equivalent Tubal 7000 from Vectan. They are single base powders, not comparable to the Norma 204 but maybe an alternativ.
 
I have loaded some cartridges with R904 and achieved similar results by loading the same cartridges with powder such as the IMR 4350 or the almost equivalent Tubal 7000 from Vectan. They are single base powders, not comparable to the Norma 204 but maybe an alternativ.
Yes, it's what I mean, IMR 4350 could be a valid alternative
 
H4350.
Drop down a grain or two and slowly work up again.
 
Here is some information from a past discussion on this forum. I haven’t had reason to test the info, so reader be warned.
IMG_0400.jpeg
 
I've been developing loads for the Norma 180 grain BondStrike using Winchester StaBALL 6.5.
 
@charlieB12345
Good info there from Firebird.
Also, in burn rate comparison charts, Staball 6.5, which is also double based, sits very close to Norma 204. Currently I use Staball 6.5 in a favourite 375 H&H load and I have read of other getting good results in other calibres. Staball 6.5 seems reasonably available so maybe worth trying ... ??
 
Reloder 19 is not the same thing as Norma 204, but more comparable to R905 which is a more slower powder than Norma 204.
 
IMR4451 and N555 (Vita) have a comparable powder burn rate like the N204.
 
I like the VV powders - they make both single and double based powders. I expect you could find a good substitute with their N5XX series of powders. I use both N150 and N560 in various applications. They are flexible powders.
 

Forum statistics

Threads
64,760
Messages
1,426,459
Members
132,514
Latest member
79kingso2
 

 

 

Latest posts

Latest profile posts

American marketing tour update!

flights are booked Uber rides confirmed, car hire deposit paid! Hotels booked!

Im getting ready to go but first I have a 3 week photo Safari tour scouting some locations in the Limpopo province for future Photo safari tours! watch this space for awesome updates and footage !!!

Remember ISE Show 8-11 Jan in Denver Colorado!

Then from there I will be traveling by car for over a week
gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
 
Top