Help to reload

BigCat

New member
Joined
Mar 3, 2025
Messages
13
Reaction score
9
Hi all, could someone who has the Woodleigh reloading manual check for data on reloading the 577/500 3 1/8 caliber? Thanks a lot
 
I haven't had a 3-1/8" rifle but have reloaded the No.2 quite a bit.
The usual smokeless load is with 4198 (H or IMR) and a filler - I use backer rod.
A good regulating load for the one double I had was 54grs H4198 and a paper patched 450gr bullet.

I would think that, if your rifle is nitro proved, you would be leaning toward a heavier charge and heavier bullet but 4198 can surely be used.
What rifle are you loading for?
 
Sorry, just looked all through my woodleigh book and can’t find that caliber.
Saves me looking. As far as I know there is only one edition.
Unfortunately they did not publish data for .375H&H either but there are probably many covered that are not listed in other manuals
 
Mine is copyright 2014, I'm assuming that's the 2014 edition, as I didn't see "first edition published..." "second edition published..." on the copyright page.

For the .375, this plus 3 more pages.
375.jpg
On the 577, I see a 3 inch, but not a 3 1/8 inch. I don't know enough about those cartridges to know if that's helpful.
577a.jpg
577b.jpg
 
Last edited:
Your book doesn't have 375H&H?.... Mine does
Thanks, I will check because Saint Panzer does.

From memory mine doesn’t. I m pretty sure I even emailed Woodleigh and received a response along the lines of it was not included at the time of printing but I could use .375flanged data.

When I purchased the book it was because of my interest in the larger cartridges and the only one I hold at present is a .375H&H so I sort of wanted the book to make reference to one of the most popular DG cartridges available that forms a port of my small collection of related items
 

Forum statistics

Threads
59,477
Messages
1,290,970
Members
107,968
Latest member
RayGooge7
 

 

 

Latest posts

Latest profile posts

mrpoindexter wrote on Charlm's profile.
Hello. I see you hunted with Sampie recently. If you don't mind me asking, where did you hunt with him? Zim or SA? And was it with a bow? What did you hunt?

I am possibly going to book with him soon.
Currently doing a load development on a .404 Jeffrey... it's always surprising to load .423 caliber bullets into a .404 caliber rifle. But we love it when we get 400 Gr North Fork SS bullets to 2300 FPS, those should hammer down on buffalo. Next up are the Cutting Edge solids and then Raptors... load 200 rounds of ammo for the customer and on to the next gun!
To much to political shit, to little Africa :-)
Spending a few years hunting out west then back to Africa!
 
Top