Help to reload

BigCat

New member
Joined
Mar 3, 2025
Messages
14
Reaction score
9
Hi all, could someone who has the Woodleigh reloading manual check for data on reloading the 577/500 3 1/8 caliber? Thanks a lot
 
I haven't had a 3-1/8" rifle but have reloaded the No.2 quite a bit.
The usual smokeless load is with 4198 (H or IMR) and a filler - I use backer rod.
A good regulating load for the one double I had was 54grs H4198 and a paper patched 450gr bullet.

I would think that, if your rifle is nitro proved, you would be leaning toward a heavier charge and heavier bullet but 4198 can surely be used.
What rifle are you loading for?
 
Sorry, just looked all through my woodleigh book and can’t find that caliber.
Saves me looking. As far as I know there is only one edition.
Unfortunately they did not publish data for .375H&H either but there are probably many covered that are not listed in other manuals
 
Mine is copyright 2014, I'm assuming that's the 2014 edition, as I didn't see "first edition published..." "second edition published..." on the copyright page.

For the .375, this plus 3 more pages.
375.jpg
On the 577, I see a 3 inch, but not a 3 1/8 inch. I don't know enough about those cartridges to know if that's helpful.
577a.jpg
577b.jpg
 
Last edited:
Your book doesn't have 375H&H?.... Mine does
Thanks, I will check because Saint Panzer does.

From memory mine doesn’t. I m pretty sure I even emailed Woodleigh and received a response along the lines of it was not included at the time of printing but I could use .375flanged data.

When I purchased the book it was because of my interest in the larger cartridges and the only one I hold at present is a .375H&H so I sort of wanted the book to make reference to one of the most popular DG cartridges available that forms a port of my small collection of related items
 

Forum statistics

Threads
64,758
Messages
1,426,436
Members
132,511
Latest member
AgustinWhe
 

 

 

Latest posts

Latest profile posts

American marketing tour update!

flights are booked Uber rides confirmed, car hire deposit paid! Hotels booked!

Im getting ready to go but first I have a 3 week photo Safari tour scouting some locations in the Limpopo province for future Photo safari tours! watch this space for awesome updates and footage !!!

Remember ISE Show 8-11 Jan in Denver Colorado!

Then from there I will be traveling by car for over a week
gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
 
Top