cup point solids on game

Green Chile

Gold supporter
AH legend
Joined
Feb 12, 2022
Messages
3,078
Reaction score
10,770
Location
TX
Media
113
Hunting reports
Africa
4
USA/Canada
4
Member of
DSC, NRA, GSCO
Hunted
Saskatchewan, South Africa, Zimbabwe, 30 US states and counting
Who has some experience shooting the cup point solids on game? I've been hearing reports of them creating wound channels of 2x bullet diameter, almost like an expanding solid. I'm curious in particular with Northfork's version of this but interested in anyone's experience with this style of solid bullet. I heard Kevin Robertson say that if limited to one bullet in Africa, this would be his choice.

CPS.jpg
 
I’ve heard the same thing. Hopefully someone with direct experience will chime in.
 
I have experience with them out out 416 Rem Mag. on buffalo, eland and several smaller plains game. Agree with Kevin Robertson on how they perform. Very accurate. Easy to work up loads with them. They penetrate in straight line. Penetration depth is less depth than comparable FP monolithic. Quite a bit more depth than tough soft points like TSXs, TBBCs and A-Frames. Nothing unexpected or unpredictable in how they act. All around excellent bullet. Only recovered them out of eland and buffalo. Always complete pass through on PG smaller than eland. My experience is limited to .416 CPS at about 2300 fps.
 
Dr. Kevin Robertson highly recommends them in his books and interviews.

There is a YouTube series that you could find on-line called: "Africa Hunting (Bullets) 101 With Kevin Robertson". The word in the brackets changes depending on the main subject.

If you don’t have time to listen to the entire interview (highly recommend) skip forward to around minute 40. Enjoy.

 
These bullets "Rivet" rather than expand fully (unlike conventional soft points). They are ideal for backing shots at departing Cape buffalo or eland (or the like). Also excellent for stopping Cape buffalo charges.

Not suitable for hunting lion or leopard (or light framed plains game). Northfork's Percussion Point bullet is far better suited to these applications because it has an expansion initiating ring milled into the ogive with results in full expansion within 2" of penetration.
 
Who has some experience shooting the cup point solids on game? I've been hearing reports of them creating wound channels of 2x bullet diameter, almost like an expanding solid. I'm curious in particular with Northfork's version of this but interested in anyone's experience with this style of solid bullet. I heard Kevin Robertson say that if limited to one bullet in Africa, this would be his choice.

View attachment 552169
@Green Chile
The Woodleigh hydrostatic stabilised projectile is reputed to be excellent for penetration and wound channels as well.
I have not used them but a mate that used them on water buffalo with a 300 Weatherby said the ream a buffalo out from stem to stern.
He said it kicked up dust a couple of hundred yards behind the buff and he thought he had missed. The buff took a few wobbly steps and fell over.
Bob
Screenshot_20230819-211627_Google.jpg
 
Thanks for the replies. Any photos of a recovered cup point? I like the comment about them riveting. That’s more accurate than to say expanding solid. There also seems to be some kind of air bubble effect that has hydraulic cavitation results that create larger than caliber wound channels. That’s the logical explanation for disruption beyond the touch of the bullet. The riveting is fairly minor in comparison to the petals of an expanding soft point.
 
Last edited:
Thanks for the replies. Any photos of a recovered cup point? I like the comment about them riveting. That’s more accurate than to say expanding solid. There also seems to be some kind of air bubble effect that has hydraulic cavitation results that create larger than caliber wound channels. That’s the logical explanation for disruption beyond the touch of the bullet. The riveting is fairly minor in comparison to the petals of an expanding soft point.
400Gr .416 caliber Northfork Cup Point Solid recovered from Cape buffalo (right side).

Note how bullet riveted, as opposed to expansion in the true sense ( as seen on the recovered 400Gr .416 caliber Northfork Semi Spitzer on the left side).
FB_IMG_1692453192427.jpg
FB_IMG_1692453195187.jpg
FB_IMG_1692453200847.jpg
 
Perfect and that's exactly the application I'm thinking of...416 Rigby on buff. Do you mind sharing load data? Did you approach it like loading for a Barnes X? I asked NF for load data and got just a little bit of info and no starting loads...only max loads.
 
I wrote a report in the bullet performance data base on results from my .450-400 on buffalo. I was very impressed!
 
Could you put a link here to your report?
 
Bullet Performance Database
Type of bullet: North Fork cup point solid
Bullet speed: MV 2100 FPS
Distance of shot: 80M
Original weight: 400 gr.
Recovered weight: 400 gr.
Calibre: 450-400 3"
Species: Cape buffalo
Shot placement: this was a follow up shot from rear, buffalo was already mortally wounded and had spun away and starting to run. Bullet hit inside surface of right "ham", penetrated hindquarter ( missing the femur), through guts, rumen, and part of the right lung, lodged in ribcage on right side, after at least a meter and a half of penetration. There was a very noticeable "whomp' when the bullet hit, and visible reaction to the shot. buffalo ran only about five more steps. I was very impressed. Of course they quit making them!


 
Bullet Performance Database
Type of bullet: North Fork cup point solid
Bullet speed: MV 2100 FPS
Distance of shot: 80M
Original weight: 400 gr.
Recovered weight: 400 gr.
Calibre: 450-400 3"
Species: Cape buffalo
Shot placement: this was a follow up shot from rear, buffalo was already mortally wounded and had spun away and starting to run. Bullet hit inside surface of right "ham", penetrated hindquarter ( missing the femur), through guts, rumen, and part of the right lung, lodged in ribcage on right side, after at least a meter and a half of penetration. There was a very noticeable "whomp' when the bullet hit, and visible reaction to the shot. buffalo ran only about five more steps. I was very impressed.


 
Bullet Performance Database
Type of bullet: North Fork cup point solid
Bullet speed: MV 2100 FPS
Distance of shot: 80M
Original weight: 400 gr.
Recovered weight: 400 gr.
Calibre: 450-400 3"
Species: Cape buffalo
Shot placement: this was a follow up shot from rear, buffalo was already mortally wounded and had spun away and starting to run. Bullet hit inside surface of right "ham", penetrated hindquarter ( missing the femur), through guts, rumen, and part of the right lung, lodged in ribcage on right side, after at least a meter and a half of penetration. There was a very noticeable "whomp' when the bullet hit, and visible reaction to the shot. buffalo ran only about five more steps. I was very impressed. Of course they quit making them!


Thanks. Here's your bullet from that post showing the riveting effect.
IMG_0784.JPG
 

Forum statistics

Threads
57,839
Messages
1,241,358
Members
102,161
Latest member
VirgieS36
 

 

 

Latest posts

Latest profile posts

Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
Franco wrote on Rare Breed's profile.
Hello, I have giraffe leg bones similarly carved as well as elephant tusks which came out of the Congo in the mid-sixties
406berg wrote on Elkeater's profile.
Say , I am heading with sensational safaris in march, pretty pumped up ,say who did you use for shipping and such ? Average cost - i think im mainly going tue euro mount short of a kudu and ill also take the tanned hides back ,thank you .
 
Top