577/500 No. 2 Express

If you are US based I suggest you call Buffalo Arms https://www.buffaloarms.com/ and get your name on the wait list for a copy of the 4th Edition of Greame Wright book, Shooting The British Double Rifle rifle. The 4th edition was just released in Australia and books are in route to Idaho. Supposed to have 150 new pages.

I have two 500 No.2 EXpress guns and both use the 577/500 No. case, 2.83 long case.

The loads I have built (loaded) right now use the 440 grain bullet were built in 2017 for my 70th birthday Moose hunt. I looked in the box for the load card, and it is missing. But the load used is Varget. Those were developed from cordite loads intended double rifles.

The loads list in Woodleigh for .500 BPE are for the 3" and 3 1/4. I can copy these load if that is what you.
 
If you are US based I suggest you call Buffalo Arms https://www.buffaloarms.com/ and get your name on the wait list for a copy of the 4th Edition of Greame Wright book, Shooting The British Double Rifle rifle. The 4th edition was just released in Australia and books are in route to Idaho. Supposed to have 150 new pages.

I have two 500 No.2 EXpress guns and both use the 577/500 No. case, 2.83 long case.

The loads I have built (loaded) right now use the 440 grain bullet were built in 2017 for my 70th birthday Moose hunt. I looked in the box for the load card, and it is missing. But the load used is Varget. Those were developed from cordite loads intended double rifles.

The loads list in Woodleigh for .500 BPE are for the 3" and 3 1/4. I can copy these load if that is what you.
Hi dear, I would like to know if it is possible to reload with modern powders the 577/500 magnum caliber, the one with a 3 1/8 inch case. On the barrels it is written that it was made for a 440gr bullet and 160gr of BP. Do you have any information about this? I will try to get a copy of that book. Thanks
 
I am not sure what the 577/500 Magnum is. Could you mean Express and not Magnum.

No listings for a 3-1/8 in case, just 3 inch and 3-1/4 inch case.

If you gun is marked .440 grain bullet and 160 grains of BP-then try that first. You could do a nitro for black conversion from that.

There is some much variations in these all similar but different cartridges I am reluctant to post load tables. This is one area I hope Wright covers in Edition 4, some sorting out of .500 Express BPE versus NE. It is confusing

Can you post pictures of your markings.
 
I am not sure what the 577/500 Magnum is. Could you mean Express and not Magnum.

No listings for a 3-1/8 in case, just 3 inch and 3-1/4 inch case.

If you gun is marked .440 grain bullet and 160 grains of BP-then try that first. You could do a nitro for black conversion from that.

There is some much variations in these all similar but different cartridges I am reluctant to post load tables. This is one area I hope Wright covers in Edition 4, some sorting out of .500 Express BPE versus NE. It is confusing

Can you post pictures of your markings.
of course, maybe I don't understand what caliber it is and I can't explain. Maybe the photos are clearer than me. thanks
 

Attachments

  • ARMY-NAVY-COS-LUG-21-8.jpg
    ARMY-NAVY-COS-LUG-21-8.jpg
    298.5 KB · Views: 2
  • ARMY-NAVY-COS-LUG-21-17.jpg
    ARMY-NAVY-COS-LUG-21-17.jpg
    295.2 KB · Views: 2
I am not sure what the 577/500 Magnum is. Could you mean Express and not Magnum.

No listings for a 3-1/8 in case, just 3 inch and 3-1/4 inch case.

If you gun is marked .440 grain bullet and 160 grains of BP-then try that first. You could do a nitro for black conversion from that.

There is some much variations in these all similar but different cartridges I am reluctant to post load tables. This is one area I hope Wright covers in Edition 4, some sorting out of .500 Express BPE versus NE. It is confusing

Can you post pictures of your markings.
My buddy just bought a double in 577/500 a No2 I think & the other normal one is indeed a 3 1/8in case known as Express or Magnum not 100% if it was loaded as a Nitro round.

Traveling right now & not near my books .
 

Forum statistics

Threads
59,447
Messages
1,289,922
Members
107,895
Latest member
fynite
 

 

 

Latest posts

Latest profile posts

Currently doing a load development on a .404 Jeffrey... it's always surprising to load .423 caliber bullets into a .404 caliber rifle. But we love it when we get 400 Gr North Fork SS bullets to 2300 FPS, those should hammer down on buffalo. Next up are the Cutting Edge solids and then Raptors... load 200 rounds of ammo for the customer and on to the next gun!
To much to political shit, to little Africa :-)
Spending a few years hunting out west then back to Africa!
mebawana wrote on MB_GP42's profile.
Hello. If you haven't already sold this rifle then I will purchase. Please advise. Thank you.
jbirdwell wrote on uplander01's profile.
I doubt you are interested in any trades but I was getting ready to list a Sauer 404 3 barrel set in the 10-12 price range if your interested. It has the 404J, 30-06 and 6.5 Creedmoor barrel. Only the 30-06 had been shot and it has 7 rounds through it as I was working on breaking the barrel in. It also has both the synthetic thumbhole stock and somewhere between grade 3-5 non thumbhole stock

Jaye Birdwell
 
Top