.458 win mag for North America

IF you are only going to use open sights on this rifle, then you should put very good sights on it. if you are going to scope it, well, then the open sights are backup. still be nice to have good sights on it, but if there is a scope on the gun, you will rarely if ever use the sights.
Gun came with a old bushnell banner scope but I don’t trust that it can hold up to the recoil. it may be just fine with these 350’s.
 
Gun came with a old bushnell banner scope but I don’t trust that it can hold up to the recoil. it may be just fine with these 350’s.
Haha the scope cost less than a box of ammunition!
 
Haha the scope cost less than a box of ammunition!
Yup ain’t paying for glass either. I didn’t even pay for the rifle traded 2 basket case motorcycles and buddy gave me $400 on top.
 
Well I finally got around to shooting these loads.
At 70 yards(max I could get at my friends place) off hand I got about a 3 inch group with the hornady 350gr round nose and 67.5gr of accurate 2015. Primers look fine no unburnt powder in the bore and recoil was about that of a 12ga 2 3/4 rifled slug I think I found my bear load.
 
You may want to try 450 TSX or other long bullets in your WM and see what the group size is. Some (most?) WM do not like short bullets. Have reloaded for two and could get MOA or very close to that with 450 or 500 grain bullets but accuracy was much worse with 3-400 grain. Short bullets are out of the brass before engaging rifling, and that is usually rough on accuracy.
 
You may want to try 450 TSX or other long bullets in your WM and see what the group size is. Some (most?) WM do not like short bullets. Have reloaded for two and could get MOA or very close to that with 450 or 500 grain bullets but accuracy was much worse with 3-400 grain. Short bullets are out of the brass before engaging rifling, and that is usually rough on accuracy.
Their good enough for what I’m doing as long as it’s in the heart/lungs of whatever im hunting I’m good to go
 

Forum statistics

Threads
59,434
Messages
1,289,478
Members
107,853
Latest member
SilkeGcl78
 

 

 

Latest profile posts

Currently doing a load development on a .404 Jeffrey... it's always surprising to load .423 caliber bullets into a .404 caliber rifle. But we love it when we get 400 Gr North Fork SS bullets to 2300 FPS, those should hammer down on buffalo. Next up are the Cutting Edge solids and then Raptors... load 200 rounds of ammo for the customer and on to the next gun!
To much to political shit, to little Africa :-)
Spending a few years hunting out west then back to Africa!
mebawana wrote on MB_GP42's profile.
Hello. If you haven't already sold this rifle then I will purchase. Please advise. Thank you.
jbirdwell wrote on uplander01's profile.
I doubt you are interested in any trades but I was getting ready to list a Sauer 404 3 barrel set in the 10-12 price range if your interested. It has the 404J, 30-06 and 6.5 Creedmoor barrel. Only the 30-06 had been shot and it has 7 rounds through it as I was working on breaking the barrel in. It also has both the synthetic thumbhole stock and somewhere between grade 3-5 non thumbhole stock

Jaye Birdwell
 
Top