350gr swift A frames

I have shot 450 TSX out of my 458Lott, a 350 would be in the upper 2500 to low 2600.

Having used the AFrame line, I would ask Swift what their thoughts are. If they will open up at that speed, you should not have many problems. Just be aware, the 350s will not have a hi SD. Something to consider.
 
I have shot 450 TSX out of my 458Lott, a 350 would be in the upper 2500 to low 2600.

Having used the AFrame line, I would ask Swift what their thoughts are. If they will open up at that speed, you should not have many problems. Just be aware, the 350s will not have a hi SD. Something to consider.
True. Not a thick skinned DG bullet but that is what Swift’s factory 45-70 load is loaded with so it should perform well. Different design than the standard a frame
 
No, but it should be a heck of a short range, <150yd, PG bullet. I’ve used the 350gr Hornady on deer and hogs: devastating. I worked up a load for a 350gr Barnes TSX, but testing didn’t show good expansion. Velocity was ~2100fps from a Ruger #3. Used H4198.
 
This is one I recovered in water jugs. At 50yds it went through 7 1gal milk jugs full of water, only lost 1gr. I feel like it would make a decent DG bullet, certainly wouldn't be the worst choice

20220406_141457.jpg
20220406_141459.jpg
 
Last edited by a moderator:
This is one I recovered in water jugs. At 50yds it went through 7 1gal milk jugs full of water, only lost 1gr. I feel like it would make a decent DG bullet, certainly wouldn't be the worst choice

View attachment 494332View attachment 494333
Something to consider, in testing 300 BLK Hornady Sub X for expansion, I found that 2 liter soda bottles were better at stopping bullets than milk jugs. Five milk jugs through and through was stopped in four 2 liter bottles.
 
I shoot 350 grain .458 bullets in a couple of my rifles and they killed all they hit.
These were North Fork bullets and none were recovered - all shoot throughs.
I do not waste NF bullets on milk jugs and such.
 
i have not used the 350 swifts, i suspect they will work just fine tho. is it a flat point? i used the kodiak bullet company's 350 gr bonded at 2150 fps. i suspect they would kill anything i wanted to shoot with a soft. as @crs noted, north fork bullets are awesome as well.
 
1Dirthawker,
+1 on the Kodiak bullets. Our bullet testing team used them & NF in Africa -- both 450 grain solids shot through ele heads and into body -- DRT! Soft points were good on Cape buff.
 
i have not used the 350 swifts, i suspect they will work just fine tho. is it a flat point? i used the kodiak bullet company's 350 gr bonded at 2150 fps. i suspect they would kill anything i wanted to shoot with a soft. as @crs noted, north fork bullets are awesome as well.
They are a flat point
 
as stated before, i suspect they will work just fine. was merely concerned about magazine issues, (detonation)
 

Forum statistics

Threads
57,288
Messages
1,227,307
Members
100,606
Latest member
mangalbhanu
 

 

 

Latest profile posts

John Kirk wrote on Macduff's profile.
Great transaction on some 375 HH ammo super fast shipping great communication
akriet wrote on Tom Leoni's profile.
Hello Tom: I saw your post about having 11 Iphisi's for sale. I have been thinking about one. I am also located in Virginia. Do you have photos of the availables to share? My email is [redacted]

Thanks and regards,

Andy
Natural Bridge, Virginia
 
Top