When loading the 500 Jeffery is a filler (foam plug) needed?

[SkullKeeper]

Starting to load for this and was curious. Thank you for any and all help!

 

[deewayne2003]

The woodleigh manual shows a wad for the majority of the 535gr loads.

 

[DWB]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

 

[Frederik]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

@DWB Maybe a short video or photos demonstrating how you make the plugs?

 

[5shot]

@DWB Maybe a short video or photos demonstrating how you make the plugs?

Just drive and twist the case into the foam and you will easily cut the foam. You can source closed cell foam very cheaply in numerous thicknesses.

 

[SkullKeeper]

The woodleigh manual shows a wad for the majority of the 535gr loads.

I see that now , I’m loading 570’s & 600’s so it looks like no filler wad is required

 

[SkullKeeper]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

What powder are you using ? I’m going to try H4350 and RL15.

 

[DWB]

Playing around between N540 and N550.

Seems like N550 will be my go to

 

[Jefferry404]

@SkullKeeper
you might also consider bulky powders n165 (similar to @DWB or h4831sc (AA manual has load data with pressure for the h4831). I use either in my 505 Gibbs. H4350 is probably a better choice, more efficient, slightly less than 100% load density.
Steve

 

[Jack Stevens]

Starting to load for this and was curious. Thank you for any and all help!

For "light"/downloaded practice loads, you can use AA5744 with no filler.

 

[SkullKeeper]

For "light"/downloaded practice loads, you can use AA5744 with no filler.

I don’t have any light bullets , only 570 gr

 

[Jack Stevens]

I don’t have any light bullets , only 570 gr

That’s not what I meant. Not “light” bullets, but “light” load as in low-recoil.

In my .404 Jeff I load 400grn coated hard-cast bullets with 5744 (and no filler) for easy-on-the-shoulder plinking in order to practice good shooting form.

 

[analog_peninsula]

In my .404 Jeff I load 400grn coated hard-cast bullets with 5744 (and no filler) for easy-on-the-shoulder plinking in order to practice good shooting form.

I’d love to find .512 coated hard cast bullets for my A2.

 

[Jack Stevens]

I’d love to find .512 coated hard cast bullets for my A2.

Like this? .... They're coated and gas-checked.

.500 (.510” or .512

bengalbullets.com