When loading the 500 Jeffery is a filler (foam plug) needed?

[SkullKeeper]

Starting to load for this and was curious. Thank you for any and all help!

 

[deewayne2003]

The woodleigh manual shows a wad for the majority of the 535gr loads.

 

[DWB]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

 

[Frederik]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

@DWB Maybe a short video or photos demonstrating how you make the plugs?

 

[5shot]

@DWB Maybe a short video or photos demonstrating how you make the plugs?

Just drive and twist the case into the foam and you will easily cut the foam. You can source closed cell foam very cheaply in numerous thicknesses.

 

[SkullKeeper]

The woodleigh manual shows a wad for the majority of the 535gr loads.

I see that now , I’m loading 570’s & 600’s so it looks like no filler wad is required

 

[SkullKeeper]

I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.

What powder are you using ? I’m going to try H4350 and RL15.

 

[DWB]

Playing around between N540 and N550.

Seems like N550 will be my go to