What did you reload today?

[Wyatt Smith]

It’s a ball powder as stated by puddle. Some say the are harder to ignite, I have burned pounds and pounds of Winchester 760 and never had a trouble. Most factory ammo is loaded will ball powder. The current military 556 ammo is loaded with Winchester 748 ball powder.
I would use your load with confidence.

 

[Manwe]

Loaded 100 more 230gr snake eggs while a batch of .45 brass was being cleaned this afternoon.

 

[Scott CWO]

That load is within Hodgdon's recommended load range.

The only niggly point I can think of is it's a double-base powder, so a steady diet may increase wear at the throat, but you'd have to fire A LOT of that powder to see that kind of wear.

I use that powder in multiple cartridges, including the H&H.

Okay than you very much. Good to know.

 

[jwp475]

Norma brass, Federal 215 primer, 380 grain LeHigh flat point, 80 grains of AA2230

 

[jwp475]

Norma brass, Federal 215 primer, 380 grain LeHigh flat point, 80 grains of AA2230

 

[Manwe]

Today I put 100 rounds through my 20" Cimarron 1866 Yellowboy chambered in .38 Special, and 50 rounds through my 7 1/2" new model Ruger Vaquero chambered in .45LC.

 

[Rare Breed]

Going to start working on 180 gr CEB Maximus in 30-06. Has anyone else used these?

Have not used these but love CEB!!!!

 

[leslie hetrick]

loaded 20 rounds for my .280 a-bolt, 53 grs 4831 and a 150 gr scirocco bullets, thats my normal hunting load. shoots very good. i,m going to try imr 4350, my friend claims imr 4350 is the cats meow in his remington 700 in .280.

 

[458 Exp]

Decided to dust off the old girl and load her some fresh ammo.
Hoping there’s a Warthog or Impala day dreaming so I can test the bullets out.

Mannlicher Schönauer Model 1910 9.5x56.
Loaded with SBC .375 250gr in-front of N140 in converted Norma 7x64 Bren cases.

 

[buffybr]

Sunday I melted 26 lbs of range lead ingots and cast 485 210 gr bullets for my .45 acp and 520 158 gr .38 caliber bullets. Yesterday I got the .45 bullets sized and lubed, and today I'll finish lubing and sizing the .38s.

 

[Puddle]

Started my annual prepping of brass for use the rest of the year.
Wrapped up completing 400+ brass divided about equally between the 9.3x62mm and the .375 H&H.
Now I'm up to my elbows working through about 500 brass for the .30-06.

 

[Green Chile]

I've been doing a lot of 45 Auto Rim lately and cast loads for 30-40 Krag. I need to load more 470 Nitro and 45-90 with holy black for the Wesson long range rifle.

 

[Brian Rothhammer]

Decided to dust off the old girl and load her some fresh ammo.
Hoping there’s a Warthog or Impala day dreaming so I can test the bullets out.

Mannlicher Schönauer Model 1910 9.5x56.
Loaded with SBC .375 250gr in-front of N140 in converted Norma 7x64 Bren cases.



View attachment 659690

_Purrrrty._

To what depth do you set those 250s?

 

[458 Exp]

_Purrrrty._

To what depth do you set those 250s?

They are 74.5mm which feeds perfectly in my rifle out of the rotary magazine

 

[Brian Rothhammer]

They are 74.5mm which feeds perfectly in my rifle out of the rotary magazine

What projectile, exactly?

Search of 'SBC .375 250 grain' shows me lots of pointy things.

My M1910 likes round nose 270 grain.

 

[458 Exp]

What projectile, exactly?

Search of 'SBC .375 250 grain' shows me lots of pointy things.

My M1910 likes round nose 270 grain.

Spoor Bullet Company.
Busy building a Website but currently you can find info in Instagram or FB has a closed group.

I use to shoot the 270gr Woodleigh.
Getting 2200 fps on these

 

[Brian Rothhammer]

Spoor Bullet Company.
Busy building a Website but currently you can find info in Instagram or FB has a closed group.

I use to shoot the 270gr Woodleigh.
Getting 2200 fps on these

Good to know!

Thank you.