What did you reload today?

[Chukardogs]

Lil' Gun works great in my hornet and .221 fireball. I switched over to it a couple years ago and probably will never change.

 

[BOSSGobbler]

Hmm, would a longer barrel advantage of the slower powder? T/C made my barrel in 28" for the Pro Hunter I have.

I would say give it a test and find out. Do you have Gordons Reloading tool? Its free and can give you an idea where to start your test ladder.

 

[Puddle]

Finished the initial loading of the 180 grain Norma BondStrike for the .30-06.
Will test, with chrono in hand, on Labor Day, Monday.

Should be fun. Heck, it's always fun.

 

[Bob Nelson 35Whelen]

Hmm, would a longer barrel advantage of the slower powder? T/C made my barrel in 28" for the Pro Hunter I have.

@Ryan
Yes the slower powder would be an advantage in a longer barrel with the pro hunter. Another great powder for the heavier bullets is Hodgon Superformance. Load the same weight as the H4831sc. This will give even higher velocities and lower pressure. In my 25 I got around a 200fps gain at what appears to be lower pressure.
Bob

 

[Bob Nelson 35Whelen]

@Ryan
Superformance is a tad slower than H4831sc so give great performance in the 25. Never exceed the max chare of 4831sc when using it tho.
Superformance will give the 25-06 a set of ball like you wouldn't believe.
Bob

 

[Niklas]

View attachment 630194
Just finished the last batch for my upcoming trip to Zimbabwe!

I get a bunch of DMs questioning the half empty boxes… what you see is exactly 5kg/11lbs… the limit for air travel in Europe

 

[meigsbucks]

I had a Ruger .308 that wouldn’t shoot well consistently. Sold it and picked up a Browning X-bolt at a great price. Cranked out some 150gr Speer spritzers with CFE223 to break in the new .308.

 

[Boela]

Ready for an upcomming Nyala cull: 170 x 30-06

Bullet: Peregrine (180gr)
Propellant: S365 (54,5gr)
Case: Federal
Primer: Remington
Velocity: 2700fps

 

[Badboymelvin]

Hey crew,

Was bored today so l thought I'd load up some more 425 Express ammo...

When l bought my rifle l also purchased 100 un-formed cases - but with the correct headstamp.
I had already loaded up 50, so l thought l might as well load up some more!

Here's the un-formed case...

With the correct headstamp...

I then ran the un-formed case through a FLS die...

And trimmed... simple!

These are what I use in my 425 Express, Aussie made 360gn Atomic 29 projectiles...

The newly formed 425 Express case is then primed with a CCI Mag Primer, filled with 72gn of 2206H (H4895) and the Atomic 29 projectile seated and crimped...

And done!
This load produces 2500fps with the 360gn Atomic 29 and once loaded, l'm ready for anything

Russ

 

[Luederitz]

A couple of loads of the 7x66SE vom Hofe for my different weapons in this caliber.
And also some .33 Nosler...

Used bullets (left to right):
HDB, Ballistic Tip, Accubond LR, Aero, Tipped GK, Accubond

 

[FlyGuy]

Finished the initial loading of the 180 grain Norma BondStrike for the .30-06.
Will test, with chrono in hand, on Labor Day, Monday.

Should be fun. Heck, it's always fun.

How did it go Puddle?
Also looking at giving the 180gr Bondstrike a try in my 06.

 

[FlyGuy]

A couple of loads of the 7x66SE vom Hofe for my different weapons in this caliber.
And also some .33 Nosler...

Used bullets (left to right):
HDB, Ballistic Tip, Accubond LR, Aero, Tipped GK, Accubond

View attachment 631299

Was reading up about the 7x66SE a short while ago.
Very interesting cartridge!

 

[Puddle]

How did it go Puddle?
Also looking at giving the 180gr Bondstrike a try in my 06.

@FlyGuy - I settled on 56.5 grains H4350 using Norma brass and Fiocchi LR primers.

Average MV was 2,743+ fps which is good as my barrel is most consistent with 180 grain bullets launching between 2,700 - 2,750 fps. Initial 5 round groups were easily 1".

Initial OAL was simply standard magazine length - 3.340" which happens to be -0.050" off the rifling for that bullet' ogive.

Next week I'll use the same recipe, but test various seating depths: -0.060", -0.065", and -0.070" and see if there's a bullet jump in there that the barrel prefers.

I'll see what happens ...

 

[FlyGuy]

Thanks Puddle.
2700-2750 is also the velocity that my 30-06 barrel enjoys.
Last week I did a ladder test with my 6.5x55, but the velocities were much lower than I expected.
I suspect that my old chrony is the problem.

Will run the same test this weekend using a Labradar to confirm.

 

[Tintin]

.275 Rigby

140gn Woodleighs

and some Sierra 140gn plinking / target loads

 

[Green Chile]

I was working on loads for 416 Rem mag...new R8 barrel...new scope...new loads...here are my first 3 pairs with scope corrections at 50 yards this week. Very good for a 416. This goes to Africa next month.

 

[375er]

Some 150 grain CEB Maximus in 30-06.

 

[zephyr]

12ga 1oz #8s for next weeks Sporting Clays
32-20 120gr cast bullets

 

[Green Chile]

Some 150 grain CEB Maximus in 30-06.

I was just getting Maximus load data from CEB…the same bullet in fact.

 

[375er]

I tried one test load and stopped. It was one big hole at 100yds.