What’s your ideal Dangerous Game bolt gun?

Is that you or your firearm?
Either (or both) would be perfectly acceptable in my book.
But there is something to be said for at least acting like a 12 year old every now on then...at least when you take that big DG trophy.
Me
 
I read the original post again so let me expand a bit here.

500 Jeff loaded with 570 gr Rhino controlled expanding as well as solid brass meplat solids @2350 fps.

Built on a ZKK 602 magnum action. 24 inch barrel.

2 crossbolts, extra recoil lug under the barrel and proper fit of the stock behind the tang.

Barrel band for the sling fitted with qd swivels.

Front sight with sight protector.

Shallow V 140 degree rear sight.

Safety-the stock standard two position safety as it came out from Brno. Forward is safe on and it locks the bolt in place, rear position is fire, thats it all you need 3 position safety are needed on a DG rifle.

Scopes have no place on a 500 rather go to a proper ghost ring if the V poses any issues.

The package should weigh about 11 lbs.
 
I read the original post again so let me expand a bit here.

500 Jeff loaded with 570 gr Rhino controlled expanding as well as solid brass meplat solids @2350 fps.

Built on a ZKK 602 magnum action. 24 inch barrel.

2 crossbolts, extra recoil lug under the barrel and proper fit of the stock behind the tang.

Barrel band for the sling fitted with qd swivels.

Front sight with sight protector.

Shallow V 140 degree rear sight.

Safety-the stock standard two position safety as it came out from Brno. Forward is safe on and it locks the bolt in place, rear position is fire, thats it all you need 3 position safety are needed on a DG rifle.

Scopes have no place on a 500 rather go to a proper ghost ring if the V poses any issues.

The package should weigh about 11 lbs.
I defer to your experience. Over 35 years ago I got a deal on .460 Weatherby and it had no barrel sights. I put a Leu. 2.5-8 on it and the recoil stripped out the receiver threads. Didn't measure torque back then. The gunsmith rethreaded to 8x? and it held.
Probably haven't seen good enough for open sights use since the early 70's. Got one of the adjustable rear peeps that is held in place with a suction cup to my glasses lens. Pretty aggravating set up.
I hope everyone that has had good vision most of their lives appreciate it, some us have always had to work with far less !
 
Last edited by a moderator:
Just curious - why would you scope a .505? If it is a vision thing - like my 65-year-old eyes - I think I would use a reflex or red dot sight of some sort on a .505. Even sighting 3-inches high at 100 meters will give you a point blank hold only to 150 or so. I have always thought of the Gibbs as very much an up close and personal caliber.

It’s strictly for Elephant. My thinking is for precise shots through holes in foliage for the brain. My eyes are starting to go a little bit and wanted to be able to make as precise a shot as possible the first time.
 
It’s strictly for Elephant. My thinking is for precise shots through holes in foliage for the brain. My eyes are starting to go a little bit and wanted to be able to make as precise a shot as possible the first time.
Got it. Makes sense. Get the visibility thing completely. With glasses and open sights, I can see the target. Without glasses, I can see the sights. Ghost rings are much better, but everything pretty much gets some sort of optics these days.
 
Last edited:

Forum statistics

Threads
61,111
Messages
1,335,574
Members
114,236
Latest member
sah
 

 

 

Latest posts

Latest profile posts

Back After a Long Time – Hello Again!


Hi everyone,


I’ve been a member since 2015 but haven’t been active since 2017. Life got busy, especially with building my second business. Still, I’ve kept my passion for hunting and followed things from afar. Now that I have more time, I’m excited to reconnect, contribute, and be part of the community again.


All the best,
ANDY
aquinn wrote on Raptor59's profile.
I'd like a bag of 100. I could actually pick it up since I'm in North Irving, but if you prefer, shipping it is fine.
Good day I'm Rainhold Neumbo form Namibia, I'm a professional taxidermist, anyone, can help me job I do mounting animal, full mounts, wall pedestal, shoulder mounts and many other, I'm based in Namibia I willing to travel where opportunities are, thank you, my WhatsApp number +264-814136480.
Email address neumbomakafa9@gmail.com
 
Top