Tried a new shooting setup

NDWoods

AH enthusiast
Joined
Dec 20, 2020
Messages
280
Reaction score
699
Location
Arlington Texas
Media
8
Member of
DSC, SCI
Hunted
USA, Hawaii, South Africa
I went out with my new MTM High Low Shooting Table this afternoon and I was very impressed with how comfortable and convenient it made sighting in while standing. I was shooting a 458 WM after installing a RMR. I placed a filled heavy shooting bag I always call a "Bulls Bag" on top. When not shooting it rested in the bag and was very convenient for adjusting the RMR, Plenty of room on the table for ammo and tool kit. I just left it at rest when walking down and marking the target,

The top screws on and off, and the legs collapse. It has a shoulder strap as well that I may use in a few weeks for mobile prairie doggin. I was shooting in a field and could use my boot to stand on the tabs at the base to sink in the spiked feet a couple inches to add stability.

I practice on sticks but this was absolutely perfect for sighting in. Check it out if you are looking for a compact, light, and convenient shooting platform for shooting the big boy calibers while standing. I paid $130 delivered last month.

 

Attachments

  • Screenshot 2025-05-12 at 8.27.33 AM.png
    Screenshot 2025-05-12 at 8.27.33 AM.png
    1.8 MB · Views: 89
  • Screenshot 2025-05-12 at 8.27.36 AM.png
    Screenshot 2025-05-12 at 8.27.36 AM.png
    516.7 KB · Views: 72
Looks like surveyor's transit tripod with half an ironing board attached. If they made it a bit longer enough to rest elbow on it, that would probably be better. I see transit tripods showing up all the time in second hand stores. Might try making one of these.
 
I also use one for sighting in my hard kickers. An MTM rest will fir neatly on top, if you prefer that to a heavy bag.
 
Mark Ouellette is ahead of his time. Here is his rest on top of a survey tripod. A nice compromise between a sitting bench and shooting sticks.

This is all good. The plastic bench top I use came from a similar portable shooting bench. Mine is a different brand but by gosh, it looks the same as this one!

I switched to a surveyor tripod to increase stability. These tripods are available on facebook marketplace, swap meets, garage sales on so on for less than $50 each. One could make a top for a surveyor tripod out of 3/4" plywood...
 
Mark, you missed your big chance to patent your version!
 

Forum statistics

Threads
65,570
Messages
1,447,571
Members
136,913
Latest member
FlorineD90
 

 

 

Latest profile posts

Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
 
Top