The Galas rifle ZG 47 in 9,3 x 62 - all you need

[Witold Krzyżanowski]

Hi Rob44.
What means "Kostelecky" I do not know.
Witold

 

[Rob404]

Hi Rob44.
What means "Kostelecky" I do not know.
Witold

I'm not sure Witold, perhaps the last name of the first owner,,I will let you know should I decide to purchase it,,Thank you for your help

 

[Wayne t]

Loving the gun matey
I'm keeping my eye out for something similar here in the Uk

 

[BobT]

Beautiful Rifle Witold and a very good article:

The veb is very good article by 9,3 x 62 - " Otto Bocks Cartridge - African Expedition Magazine".

My own 9,3x62 is a Husqvarna 640 built on an FN commercial action. I have a .275 in the works also, the action is a 1908 Brazilian M98. Now if I only had a .404 .....

 

[Milan]

I'm not sure Witold, perhaps the last name of the first owner,,I will let you know should I decide to purchase it,,Thank you for your help

Kostelecky sounds like a Czech last name. But most likely the gunsmith's as it looks like it was rebarelled (.250 Savage caliber rifles were not produced by any of the Czech/Polish factories as far as I know).

 

[Longwalker]

i have recently purchased a rifle that is close to your ideal, a Brno ZKK600 fitted with a ZG47 barrel in 9.3x62. I hope it will become my ideal versatile hunting rifle, because I did own a ZG47 in 30-06 and loved the construction, the engineering and the finish, but it did not fit me. This new rifle came with a poorly fitted aftermarket stock, so it is going to be a custom rifle stock project that I hope will be the best of all - a good Czech action ( not quite as good as a ZG47) and excellent barrel, in a wonderful caliber, and custom fitted to me. Should be a fun project.

 

[Milan]

i have recently purchased a rifle that is close to your ideal, a Brno ZKK600 fitted with a ZG47 barrel in 9.3x62. I hope it will become my ideal versatile hunting rifle, because I did own a ZG47 in 30-06 and loved the construction, the engineering and the finish, but it did not fit me. This new rifle came with a poorly fitted aftermarket stock, so it is going to be a custom rifle stock project that I hope will be the best of all - a good Czech action ( not quite as good as a ZG47) and excellent barrel, in a wonderful caliber, and custom fitted to me. Should be a fun project.

Funny. I have a 9.3 and like it so much I'm thinking of a project. I was considering a ZG47 as the base for one. I also saw a very nice but expensive Ralf Martini custom built on Brno Model 21 in 9.3x64. That actually got me thinking. Keep us posted.

 

[burri22]

Anyone knowing someone here in central who has a zg 47 in 9,3x62 ? I have one but in 7x64 and the rifle is awesome

 

[Hans Damsted Larsen]

Good day ZG47 friends,
I own serveral ZG rifles in Calibers 270,30-06,8x60,8x64,9.3x62 and the very famous 8x68s No.05217. It is the only factory ZG47 in this caliber that has ever been found.
The ZG has always served me well, and I feel it is the best rifle ever made.

Hi I,am on the Way too get a ZG47 in cal 9,3x62 an i would like to rebarrel it to 8x68s is it the standard zg47 recIver you have the reason i ask is because i has a weatherby barrel in 8x68s and hope its posible to Rebild the rifle sorry for my English regards Hans

 

[8X68ZG47]

Standard ZG47 action.
Not sure thread on the Weatherby barrel will be the same as ZG action.

 

[Hans Damsted Larsen]

Standard ZG47 action.
Not sure thread on the Weatherby barrel will be the same as ZG action.

Super thanks i belive the thread has to be modified but i like the caliber regards from Denmark Hans

 

[8X68ZG47]

8x68s is a versitile caliber. I am now prepaing my 8x68s BRNO ZKK602 for Cape Eland hunt later this season. Far shots - 300-400 metres.
220gn Woodleigh bullets at 2700fps.

 

[Hans Damsted Larsen]

8x68s is a versitile caliber. I am now prepaing my 8x68s BRNO ZKK602 for Cape Eland hunt later this season. Far shots - 300-400 metres.
220gn Woodleigh bullets at 2700fps.

Hawe a Nice Hunt and thanks for info regards Hans

 

[dchamp]

Don’t know about the thread for that action. CIP shows the Max Length for the 8x68s is 87mm/3.425”. You might check to see if that action will accommodate this caliber. Here is a CIP file for the 8x68s.

 

[Milan]

The bolt face will also need to be modified. Why not leave the poor ZG alone? Or at least use cartridges with .476 base? 9.3x64 sounds better and would be less work. Anyway. ZG actions are great but there are fewer and fewer good ones to be found so I cringe when they get "chopped up". But 1) I need to get over that and maybe make mine to accommodate some big cartridge and 2) better than if they were forgotten or destroyed altogether. So good luck and let us know how it works out.

 

[Buffhunter]

My zg47 in 9.3x62. Mounted with warne qd rings so can still shoot open sights when i want.

 

[ZG47]

My zg47 in 9.3x62. Mounted with warne qd rings so can still shoot open sights when i want.

Great minds think alike! I hate to imagine what you paid for that beautiful stock.

 

[Warren Knudsen]

My zg47 in 9.3x62 is heading into Botswana next month for a 10 day plains game hunt.

 

[TMac]

Witold, beautiful rifle. I‘m sure the two of you have had many memorable hunts. It’s good to have familiar friends of blued steel and wood I believe. It’s getting rarer by the day. Thank you for sharing.

 

[PerH]

Hi I,am on the Way too get a ZG47 in cal 9,3x62 an i would like to rebarrel it to 8x68s is it the standard zg47 recIver you have the reason i ask is because i has a weatherby barrel in 8x68s and hope its posible to Rebild the rifle sorry for my English regards Hans

Bestill «The 9,3x62 Journal « og les den , så mye bra kuler i 9,3 nå som har tatt opp nivåene på den veldig bra . Og bra med bly frie kuler til den også i DK . Og flere er under konstruksjon .

Jeg ville beholdt ZG og satt løpet i en annen kasse . Kanskje en MKV dukker opp billig et sted .