Take down rifles

I,m glad to find this forum, as my current big interest is to get a Take Down for travel to Africa! I was playing with idea to a take down (break down) any rifle, just by unscrewing the barel and action from the stock! So I would ask Fourfive8, is this what have you done?!
I mean could it be done with rifles like CZ550, Heym 21/30SR, Mauser 98, etc. and put the 2 pieces in a sturdy case? Will repeatedly doing so (say twice a year) not damage them? I guess there are gun cases long 85cm (instead of 125 cm), that the foam can be cut out to suit those 2 gun parts. thanks, Peter.
 
With enough tools, every rifle "can be taken down".

The real "Take Down" can be disassembled and assembled (important!) without a tool.... in the field.

Some Mannlicher-Schoenauer where made this way.

Hard to find one, today.....but still work fine.


HWL
 
Allow me to point you in the direction of the Mauser M03, I have one, in .243 and .300 Wby Magnum. The barrels include lots of options up to .458 Lott (and .404 Jefferey, .375 H&H Magnum. all the way down to .222, 223 ) Check out the Mauser web site for data, for options and prices check out https://www.rjblackwall.co.uk/mauser/ . For demo, Pete Moore did a good video here - check out
.
Good hunting !
 
Allow me to point you in the direction of the Mauser M03, I have one, in .243 and .300 Wby Magnum. The barrels include lots of options up to .458 Lott (and .404 Jefferey, .375 H&H Magnum. all the way down to .222, 223 ) Check out the Mauser web site for data, for options and prices check out https://www.rjblackwall.co.uk/mauser/ . For demo, Pete Moore did a good video here - check out
.
Good hunting !

404 Jeffery is no longer made so if you find the barrel somewhere it’s a score.
 
The word that I heard is that they are phasing out from production, the mauser 03. So, there will be less options to buy.
However, it is only the word, cannot say it is for fact.
 
Sako's new S20 rifles come apart: the buttstock is easily removed and reinstalled. It does require an Allen key, though.

 
I have several take down rifles; from .22 to .458.
I bought my first one(a slide action .22) when a teenager and my latest (a .458 DR) just a few years ago.
They have all performed well.
 
The word that I heard is that they are phasing out from production, the mauser 03. So, there will be less options to buy.
However, it is only the word, cannot say it is for fact.

You might be right. For some time there were Sauer 404 and Mauser 03 404 Jeffery barrels available but this is no longer the case. Last I checked the African calibre M03 were being phased out, maybe it’s to help with their relaunching of M98 Magnum rifles?
 
As @Red Leg suggested (almost 3 years ago) take a look at the Blaser R8.
It's an investment in the future of your international hunting experience.
 
I,m glad to find this forum, as my current big interest is to get a Take Down for travel to Africa! I was playing with idea to a take down (break down) any rifle, just by unscrewing the barel and action from the stock! So I would ask Fourfive8, is this what have you done?!
I mean could it be done with rifles like CZ550, Heym 21/30SR, Mauser 98, etc. and put the 2 pieces in a sturdy case? Will repeatedly doing so (say twice a year) not damage them? I guess there are gun cases long 85cm (instead of 125 cm), that the foam can be cut out to suit those 2 gun parts. thanks, Peter.
B L A S E R R 8

Accuracy, transportability, dependability, ergonomics, quick second shot, and the best factory trigger on the planet. Oh yes, it also reassembles to the exact point of aim as when you left home.
 
The real "Take Down" can be disassembled and assembled (important!) without a tool.... in the field.

Some Mannlicher-Schoenauer where made this way.

Hard to find one, today.....but still work fine.
HWL


Indeed.
While most take down models of the day broke open by pressing some form of release lever, twisting the forend to release lugs, then separating fore from aft sections, Steyr used a system also favored by Westley Richards for their Mannlicher Schoenauer Take Down Model. I have one (that was my grandfather's), a cased M1910 - 9.5X57 - .375 Nitro Express Rimless. The system is flawless, being engineered as finely as one would expect of a pre WW2 MS.

38398078zk.jpg

Description of MS take down system and use. The only 'tool' required is a bullet tip, pencil, stick, or similar to press into a hole in the magazine cover plate to release spring.

38398080co.jpg

38398110ef.jpg

Note access holes on magazine cover plate (above), lever in front of trigger guard (below)
38398104wl.jpg

38398105oa.jpg

Forend pin (above)

Westley Richards used a very similar system, apparently without the trigger guard lever.
38398083ll.jpg


38398228vw.jpg

M1910 Mannlicher Schoenauer Take Down Model 'in the field' held by John F. Easton.

Johnny's cat; 1932.
38398220cf.jpg
 

Attachments

  • 38398078zk.jpg
    38398078zk.jpg
    95.2 KB · Views: 90
  • 38398080co.jpg
    38398080co.jpg
    72.9 KB · Views: 82
  • 38398110ef.jpg
    38398110ef.jpg
    14 KB · Views: 70
  • 38398104wl.jpg
    38398104wl.jpg
    56.7 KB · Views: 97
  • 38398105oa.jpg
    38398105oa.jpg
    30.7 KB · Views: 81
  • 38398083ll.jpg
    38398083ll.jpg
    136.2 KB · Views: 97
  • 38398228vw.jpg
    38398228vw.jpg
    32.6 KB · Views: 87
  • 38398220cf.jpg
    38398220cf.jpg
    188.8 KB · Views: 94
Last edited by a moderator:
  • Like
Reactions: HWL
Last I checked the African calibre M03 were being phased out, maybe it’s to help with their relaunching of M98 Magnum rifles?

It can be marketing decision for Blaser group (Blaser-Mauser-Sauer), reducing competition to mauser 98 in tropical calibers, and reducing competition to modular rifles - Blaser r8.
But at this point, I can only say it is my speculation on hear-say, no official word on it.
 
Here are some works of art from Westley Richards in the takedown form:


Chambered for 9.3X62
38398948bk.jpg
38398950zb.jpg
38398951to.jpg


Left handed .22-250
38399075wx.jpg


.30-'06
38398954ms.jpg


.300 Winchester
38398956tn.jpg



.404 Jeffery
38398957sw.jpg



.416 Rigby
38399133ro.jpg
38399139to.jpg




.425 Westley Richards
38398958jn.jpg

38398960bk.jpg
 

Attachments

  • 38398948bk.jpg
    38398948bk.jpg
    1.2 MB · Views: 114
  • 38398950zb.jpg
    38398950zb.jpg
    200.8 KB · Views: 119
  • 38398951to.jpg
    38398951to.jpg
    725.7 KB · Views: 103
  • 38399075wx.jpg
    38399075wx.jpg
    1.6 MB · Views: 130
  • 38398954ms.jpg
    38398954ms.jpg
    1.3 MB · Views: 105
  • 38398956tn.jpg
    38398956tn.jpg
    718.4 KB · Views: 128
  • 38398957sw.jpg
    38398957sw.jpg
    1.2 MB · Views: 104
  • 38399133ro.jpg
    38399133ro.jpg
    169.4 KB · Views: 106
  • 38399139to.jpg
    38399139to.jpg
    1 MB · Views: 128
  • 38398958jn.jpg
    38398958jn.jpg
    1 MB · Views: 103
  • 38398960bk.jpg
    38398960bk.jpg
    764.9 KB · Views: 117
Last edited by a moderator:
I will add this as others will read and it is notice however something to take into account for those looking at the Makura Ulrich Takedown.

I have an Makura Ulrich Takedown (Blaser R93 variant) and had 25-06, 30-06, 7mm Rem Mag and 375 H&H. The 375 H&H is too long for the magazine box with the Takedown mechanism. Fitted in my Blaser Pro but not the Makura Ulrich Takedown. This would hold true for ALL full length cartridges in my opinion.
 

Forum statistics

Threads
57,869
Messages
1,241,918
Members
102,208
Latest member
CarleyCast
 

 

 

Latest profile posts

Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
Franco wrote on Rare Breed's profile.
Hello, I have giraffe leg bones similarly carved as well as elephant tusks which came out of the Congo in the mid-sixties
406berg wrote on Elkeater's profile.
Say , I am heading with sensational safaris in march, pretty pumped up ,say who did you use for shipping and such ? Average cost - i think im mainly going tue euro mount short of a kudu and ill also take the tanned hides back ,thank you .
 
Top