Rough Camping & Survival Tips

97577541_10213350489475039_6556910649912328192_n.jpg
97953724_10213350489675044_6980167994622083072_n.jpg
98071103_10213350488875024_390487976896888832_n.jpg
98887960_10213350489275034_2623351202464661504_n.jpg


Not only for bug =out
Also for hiding/protecting if you have to leave important 'things' while leaving base/camp
 
Last edited by a moderator:
96755970_3112614758784753_2602876934450839552_n.jpg
97227403_3112616372117925_4945215994470596608_n.jpg
 
Some more DIY [paperclip @ safety-pin] emergency fishhooks...

84594964_1002890430073782_348410525895360512_n.jpg
84929211_1002890443407114_3757551949650591744_o.jpg
84965686_1002890433407115_4845766516357988352_n.jpg
download.jpg
hqdefault.jpg
maxresdefault (1).jpg
maxresdefault.jpg
unnamed.jpg
 
Good use of resources and easy to find materials for emergency uses when we have no or limited supplies and tools.......

97135893_10213350423073379_6938091256585125888_n.jpg
 
Hook is Russian olive branch with thorn.
It is yucca fiber bound and finished with pine pitch.
String is yucca and cheated on the sinker.

98024869_2764384340463879_5220108474238631936_n.jpg
 
That's because its an educational and instructional show, not a survival show
He isn't left to die, the route is planned and the point is to educate, not entertain......

45485972_2136564626402657_715177119243567104_n.jpg
 
...Some good natural 'rope' plants pictures below--
Apparently the bullrush makes the strongest 'rope' of these 4 plants shown...

97812148_740064639863962_945477165485391872_n.jpg


-reedmace= also known as latifolia, bullrush, cat's-tail, nailrod,

download (1).jpg


Dandelion

download (2).jpg


Daylily

17453.jpg


Crocosma

9b3685ffe4972cbb1cf76a6fce03a272.jpg
 
.....borrowed...[Willow tree]

willow-tree.jpg


Another Bushcraft project that you don't need to be in the woods for.
This week is the Catalan tray or tension tray.
This project requires little in the way of tools, materials and skills.
Any flexible weaving material can be used, I chose willow as I have access to it, I also added a few pieces of dry dogwood in the center of the tray to add a splash of colour.

97980771_1562540263920708_5951722635187453952_n.jpg


I wont go into detail as to the construction as the images say it all.
The beauty of the tray as the name suggests us that it requires no knots or cordage to secure parts as the whole structure stays together through being under tension.

98478490_1562540333920701_3421958207461916672_n.jpg


The tray is useful either on camp or at home hung on a wall as a wall decoration or functional as the name suggests a tray.
My one tip would be use your thicker rods in the center and thinner rods towards the outside when it gets slightly more tricky to weave.

97748099_1562540377254030_8638183601768235008_n.jpg
 
...more D.I.Y. Dandelion uses...

84500923_2513297552105503_2412994772437303296_n.png


Perfect time for gathering dandelion stems for cordage, plaiting and twining material

The flowers have finished their flowering and the seeds have flown off into ze world

These Lal’uns are dandelion on cattail- foraged for their planty fibres.

97272462_738912729979153_4089196692748894208_n.jpg
 
Came across this Mole skeleton, and I see maybe an unexpected D.I.Y. 'survival' resource here if need be....?

98920521_892951077795482_8448543912133394432_n.jpg


A= Ribs maybe some small gorge fishing hooks?
A= Ribs also maybe a small needle/awl?
B= Scapula maybe an arrow head and fishing hooks?

98133363_286907379136238_8277870969876381696_n.jpg


Now, what to do with those two teeth?

98359206_182543616373902_6443710503289094144_n.jpg


[See examples of some nice small bone tools]

98d40b579c8394e10124d3f53b3441c6.jpg
 
....fine woven Milkweed natural cordage for maybe fishing....?

98163001_2873145272740552_4013021144197103616_o.jpg
98347069_2873145549407191_9102868375654105088_o.jpg
Swamp-MilkweedBC1__46775.1540512800.jpg
 
taken from the net---- Making and drilling a hole in to a bone needle--

Making bone needles, using flint tools, is actually much easier than anticipated. It just takes a lot of time.

In five hours I managed to make two needles, and that’s because I chose a fragment of bone that just needed to be scored once to make into two needle blanks.

img_6123-e1525033510845.jpg


If you’re starting with a fresh bone, the first needle will need two scored lines to extract the blank and it’ll take a lot longer.

Taking a short length of fresh hazel, split one end to about an inch down with a knife. Set a flint flake with a nice pointy bit in the center with the split wood holding it in place. You can make your own cordage or use some string to hold the split together, and therefore the flint drill bit in place. Use whipping to do this.

img_6143.jpg


Hold a loop of string on the surface of the hazel, with the end of the string upwards and the loop downwards. Then wrap the string round the centre of the loop tightly. When you come to the other end of the string, slip it through the loop and pull the two ends of the string, pulling the loop under the whipping. Trim both ends.

Key in an anchor point for the drill with another bit of flint. The drill can then be twizzled between the palms with a downward pressure to drill a hole in the flat end of the needle. I weighted the other end down with my grinding stone.

taken from the net---- Dill a hole in to a bone needle--

Making bone needles, using flint tools, is actually much easier than anticipated. It just takes a lot of time.

In five hours I managed to make two needles, and that’s because I chose a fragment of bone that just needed to be scored once to make into two needle blanks.

If you’re starting with a fresh bone, the first needle will need two scored lines to extract the blank and it’ll take a lot longer.

Taking a short length of fresh hazel, split one end to about an inch down with a knife. Set a flint flake with a nice pointy bit in the center with the split wood holding it in place. You can make your own cordage or use some string to hold the split together, and therefore the flint drill bit in place. Use whipping to do this.

Hold a loop of string on the surface of the hazel, with the end of the string upwards and the loop downwards. Then wrap the string round the centre of the loop tightly. When you come to the other end of the string, slip it through the loop and pull the two ends of the string, pulling the loop under the whipping. Trim both ends.

Key in an anchor point for the drill with another bit of flint. The drill can then be twizzled between the palms with a downward pressure to drill a hole in the flat end of the needle. I weighted the other end down with my grinding stone.

img_6146.jpg


When you can see light through the base of the hole, turn the needle over and go in from the other side. You’ll find the hole is chamfered slightly, again just due to the shape of the flint.

The head of the needle around the eye can then be ground a little more into the desired shape.
When you can see light through the base of the hole, turn the needle over and go in from the other side. You’ll find the hole is chamfered slightly, again just due to the shape of the flint.

The head of the needle around the eye can then be ground a little more into the desired shape.

img_6129.jpg
 
314feb80d1165114e4efa5ff80c61333.jpg
 
Last edited:
campf.jpg
 
100735547_2311715192467630_344989872206905344_n.png
 
cast iron.jpg
 

Forum statistics

Threads
65,444
Messages
1,444,547
Members
136,072
Latest member
FreddySige
 

 

 

Latest profile posts

Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
mcr wrote on gbflyer's profile.
Hello - I was looking at your post from several years ago regarding the Winchester 300 H&H. Any chance you still have the lefty M70 300 H&H for sale?
Thank you, Mike
'68boy wrote on Rare Breed's profile.
Wife and I will attend ah dinner in Nashville Friday night. Jay Sheets and wife Chris
crossfire3006 wrote on Hornedfrogbbq's profile.
An excellent AH member right here! I had a fantastic transaction with Hornedfrogbbq (I was the seller). His communication was first rate, payment was extremely fast, and I would have absolutely no reservations at all dealing with him again. Thank you, F!
Here we are, the last day of the show in Denver, it's been a good show but expecting a quiet day today. I will be back for-sure to do this show next year and maybe also do the one in Sacramento California.

On Monday I will be hitting the road driving from Denver and eventually make it down to Atlanta for the flight home.

its going to be a good year!
 
Top