Reloader 17 & Varget Powder

Not sure where you are based in MI, but I was just at the Sportsman's warehouse in Troy.......they have two 1 lb canisters (well......as of 20 minutes ago they had two 1 lb canisters) of Varget....$50/ lb.
Good luck on your quest!
 
In my search for substitute powders for the 9.3x62 I found that Vihtavouri powders are working well.

With 250 Accubonds N140 gave the same velocity as Varget with the same powder charge with better accuracy.

With 286 Partitions N140, N150 and N540 were all good.
Thanks for the input, I have a lot of N140 on hand and just loaded both 232 and 286 grain test loads. I over paid for Varget and also loaded some test loads, time to get out and shoot.
 
I've only seen varget once in the last 30 months, a couple weeks ago. It was $600 for a keg.

Alliant PowerPro 2000MR is a great powder for 9.3x62, so is Ramshot Big Game. They both do better with 286 gr than 250 gr. They seem to work better under a bit higher pressure. I've used them both, found them to be about the same.

Though I've never used it for 9.3x62, I'm guessing CFE223 would work well also. @Bob Nelson 35Whelen swears by it for his 35W.
Zim you are correct about Ramshot Big Game powder. Works great with 286grn bullets but I got less than stellar results with 250's. Seems they don't build sufficient pressure for complete combustion resulting in vertical stringing. Worked up a dandy load for 250grn pills using H-380 and getting excellent velocity and outstanding accuracy.
 
Not sure where you are based in MI, but I was just at the Sportsman's warehouse in Troy.......they have two 1 lb canisters (well......as of 20 minutes ago they had two 1 lb canisters) of Varget....$50/ lb.
Good luck on your quest!
$50/lb ... ridiculous.
 
I just bought 2 cans of Ramshot Magnum, at $28/lb from Midway. Course, it doesn't scale well on the hazmat charge when you buy that little, so total cost still ran me about $45/lb. Midsouth also has/had some for the same price as of yesterday.

Except for availability, that isn't much different than it was pre-pandemic.
 
I use IMR - 4064 in my 35 Whelen, it works well, so I never tried anything else. Just for giggles I ran a QuickLoad simulation for a 9.63 X 62 with a 24" barrel using IMR-4064 55.6 gr. and Varget 56.5 gr. Pressures for both were just below PMax. Velocities for the IMR was 2404 FPS for Varget it was 2402. These loads look pretty comparable. PM me if you want more info.
 
Two weeks ago, Morr's in Willow Street, PA had three 8 lb. jugs of Varget for $349.99 each.
 
Dont discount IMR4064. My most accurate loads with this round used full charges of it at least with 250 gr Barnes and Noslers, which are the bullets I prefer for PG.
Both Varget and R15 are very good choices as well.
This, there are a bunch of ctgs IMR4064 will work well in & others that are ok! It’s a very versatile powder.
 

Forum statistics

Threads
65,710
Messages
1,451,419
Members
137,850
Latest member
ONTCharles
 

 

 

Latest profile posts

migrabill wrote on eswan68587's profile.
I will take the knife for $250 shipped. Please tell me how you would like the payment.

Thanks-
Bill Shaw
4008 Andrew Ct
Abingdon , MD 21009
Timbila GAME LODGE wrote on Clayton d's profile.
Hi Clayton,

Please find attached our best quote based on your request.

I’ve also included the price list for additional animals, as well as our 2026 hunting packages for your reference.

You can also click on my banner to access our website and get more detailed information about the lodge, hunting areas, and options.

Best regards,
Orso
Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
 
Top