Refinishing a CZ 550

[Yaryan]

I have a CZ 550 that the finish is flaking off. I'd like to strip the finish, then coat in tung oil (I love a matte finish, plus I'd kind of like it to patina itself.)
1. Anyone ever done something like this? (If so pictures!)
2. Is it a good idea?
3. Pitfalls, things to look out for?
4. Does it affect anything other than looks?

Thanks for your time guys, I bought this rifle on the forum and have gotten a lot of good info here!

 

[BlueFlyer]

Traditional finish is with BLO (boiled linseed oil) rather than tung oil. But either will work OK
Suggest you remove the old finish with a scraper rather than chemically of with sandpaper. Have a look on Youtube about how to make a simple scraper.

Do not apply to the checkering or you will fill the grooves.
Simple and rewarding time spent

 

[AimSmall]

1. Yes
2. Yes
3. Be aware of your level of patience.
4. You will become 'vested' in that rifle, making it more rewarding to possess.

 

[Nhoro]

I have done 3 of my rifles so far. My CZ 550 turned out beautifully. Search for DIY Hand Rubbed Oil on factory CZ stock.

It is not difficult but does need patience. The moment you put on too much oil, it takes forever to dry. I just sanded it back at that stage and took of the gummy surface to start again.