PPU (prvi partisan) .375 H&H performance?

Good question. I bought some and I’m hoping the cases are ok so I can reload. Plan to sight in then use them on pigs and save cases as they were cheap enough to get a start. $3.20 per round. Premium brand cases can come close to that.
Availability is another thing too.
I was a bit dubious at first using PPU ammo & brass but now use a lot of it , brass seems as good or better than Winchester & Remington & in Australia its priced well, their projectiles do a job on pigs , i use PPU in 7x57 8x57 9.3x62 & 375 H&H ,222 REM & 223 REM. 6.5x55 7.62x39 & 6.5 Grendel.
 
@albravo If you can access some, AR2209 (labelled H4350 in the US) is a much better choice for .375 H&H loads than either Varget (AR2208) or H4895 (AR2206H). The Hodgdon website should have load data.
 
A chap from a .375 Ruger page expressed his approval on the .375 PPU FMJRN after he sent one through a hippos head at about 75 yards. He said it whistled right through it.
 
@albravo If you can access some, AR2209 (labelled H4350 in the US) is a much better choice for .375 H&H loads than either Varget (AR2208) or H4895 (AR2206H). The Hodgdon website should have load data.
Thanks, I have some of that. I was on the Hodgdon site earlier today and noticed the only load they recommend is H4350. For the 300 they say start at 68 and max out at 76.
 
"fun plinking" with a 375 !?!! :eek:

You are a better man than me !
Sure! Both the SP & FMJ are just fine and affordable too for walking around field practice.

I use H4895 because I can either handload full power loads or safely handload 40% reduced power loads. So handload a magazine's worth and go for a stroll...
 
Last edited:
I think we've taken the search for the "best" bullets too far. The original question was whether the PPU bullets in 300 gr. RN .375" would be OK for large deer or hogs. I actually can't imagine any possible outcome that does not result in a dead deer or hog if they are shot with that bullet. Insufficient penetration? So unlikely that it's nearly impossible. Too tough so no expansion? Very unlikely given traditional large amount of lead exposed at the tip. I've not used PPU SP ammo in .375, but have in .222 and .308, 8x57 and 7.62x39, perhaps a few others. It always shot OK, and behaved in game like any normal cup and core traditional ammo.
I have used the 9.3 version n 286 gr fair bit on moose and bear, shot from a 9.3x62 and a 9.3x64 equivalent. they are actually tougher than the Hornady SP of same weight, nearly always pass through. Need to saw through some to show you the brass thickness, I think apart from the barn door BC they are great bullets.
 

Forum statistics

Threads
64,151
Messages
1,413,126
Members
128,956
Latest member
Molly06G6
 

 

 

Latest profile posts

Beautiful Aardwolf for our Spanish client and good friend Alberto
WhatsApp Image 2025-11-12 at 17.27.22 (2).jpeg
C-YA-L8R wrote on PaulB's profile.
Hi PaulB,
I have a Ballard Arms Model 1885 chambered for .333 Jeffery Flanged. Do you have any idea where I can get ammo for this?

I am new to this forum so I am sorry if I am doing something wrong!
Thank You!
Bruce D
Lakewood Village, California

BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (1).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (2).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (11).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (5).jpg
STARCHEDUPDAD wrote on Acopperdawg's profile.
what's up buddy how are you doing today
Updated available dates for 2026!

1-27 feb is open
13-31March is open
1-10 April is open
17-30 April is open
1-6 May is open
24-31 May is open
12-18 June is open
24-30 June is open
1-17 July is open
August is now fully booked
7-30 September is open
October is wide open

Get your hunt booked today!
 
Top