Politics

…Remember folks, the sun will rise again tomorrow regardless of what happens in the next day or few. Life may be different in a way you don't care for, but there's always the possibility of changing things next election.
I, for one, will be glad when vitriol and “sky will be falling if the other guy wins” rhetoric is over. At least, until the next election, I hope.;)
 
I, for one, will be glad when vitriol and “sky will be falling if the other guy wins” rhetoric is over. At least, until the next election, I hope.;)

If Trump wins, I think the vitriol will settle down here on AH, albeit I expect a few victory lappers. If Harris wins, not so much. Whatever the case, I'd take a sudden resurgence in arguing about the .30-06 as a proper PG caliber as much more enjoyable over this thread. I'm just wore out by it all.
 
If Trump wins, I think the vitriol will settle down here on AH, albeit I expect a few victory lappers. If Harris wins, not so much. Whatever the case, I'd take a sudden resurgence in arguing about the .30-06 as a proper PG caliber as much more enjoyable over this thread. I'm just wore out by it all.
A vigorous 6.5 Creedmoor or 243 Winchester debate would be a welcome distraction on Election Day. ;-)
 
Glad that they did it. That being said, one leaves oneself to a lot of liability suits in case of an accident. There are projects we have done where without the "regulations, policies, procedures etc." we could MacGyver it much cheaper and faster. However, that would have given us no legal cover.

In the past we have implemented a multimillion-dollar MES system for the manufacture of an electronic connector that was going to be used in a classified application. The requirement was to have a complete genealogy of every connector. That meant from a serial number one could look at each component of that connector, every step of the manufacturing process for all components, who worked on it, how long, clean room particle counts, temperatures etc., etc.. Was it necessary? Who knows, but it was part of the specifications, and the company spent millions on compliance (it was a big enough of an order for them to build a complete new plant). In this case the government regulation kept a lot of people employed. ;)
Glad they did it. .... Only thing I can really agree with in that whole statement.

MacGyver it? Nobody is talking about MacGyvering anything. They built a temporary road so people can get back to some semblance of their normal lives. Just simply getting back to their homes!

Perhaps you can only see the two extremes of MacGyver something vs. overengineering it to the point you made in the rest of your comment. All that extra employment that was unnecessary sounds like a lot of wasted money and time to me.

This BS is, I hope, part of what Elon Musk is talking about. Unnecessary over regulation. I hope and pray Trump wins and Elon slashes through this ridiculous wasteful spending by the Government. As well as Trump slashing these overburdensome regulations that force this wasteful spending required by the rest of us.

To those of us who live and work in the real World of making a living are extremely fed up with these attitudes and approaches of gowing way beyond reason with regulations and the resulting engineering.

It would be great to get back to making things that function, last, and are reasonable to maintain. And common sense regulations.
 
The big problem is the states that can't provide results on election night. It may take Pennsylvania 2-3 days, and look how long Arizona took last time

Trump is right. Switch to all paper ballots, voter i.d, and we would know on election night what the results are. Just like France.
 
Will this thread go away if Trump wins tonight? :ROFLMAO:
 
The big problem is the states that can't provide results on election night. It may take Pennsylvania 2-3 days, and look how long Arizona took last time

Trump is right. Switch to all paper ballots, voter i.d, and we would know on election night what the results are. Just like France.
One would think that voting machines would be faster. I think it is the counting methodology and officials rather than the method of voting that causes the delays.

I'd hate to go back to the days of "hanging chad" ballots.

Also, all the early voting, 77 million votes as of yesterday, is paper ballots. However, almost everywhere they are not counted until the polls close, so I think that adds to the delay.

In CA one can cast a mail-in ballot on the day of the election and it will be counted when it arrives, that can add days to the final tally.
 

Forum statistics

Threads
65,557
Messages
1,447,203
Members
136,874
Latest member
pelting&leatherworking
 

 

 

Latest posts

Latest profile posts

Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
 
Top