Pay It Forward-Free

[AimSmall]

and a pair of 30-30 rifle reloading dies. Say you want them

 

[AimSmall]

Leupold rings and bases:
1" rings
30mm rings
Base 70a
Base 70ah
Base 700la

 

[teklanika_ray]

I would use them, if they are still available.
Ray H.

 

[teklanika_ray]

Have a bag of 357 BRASS cases - just say you want them.

Sorry, i meant to respond to this add. If the 375 is still available, I could use it. And would appreciate it very much.

 

[AimSmall]

Sorry, i meant to respond to this add. If the 375 is still available, I could use it. And would appreciate it very much.

357, not 375
Yes, available

 

[teklanika_ray]

357, not 375
Yes, available

Oops. Sorry. I have plenty 357 brass. Thx anyway!!

 

[elkocountygun]

Exactly, don’t say you haven’t done it before!
I have ran out of other ways to enable people to buy new guns, thought I’d give this a try!lol

hahaha

 

[Wishfulthinker580]

I’m the original owner of both of these Von Gruff knives.

Both have opened a few packages and such but that’s about it. I have not sharpened them but I know I used the honing steel on the Heavy Hunter (can’t remember for sure if I used it on the EDC).

I want to say I’ve carried the Heavy Hunter a few times. It’s sheath has a significant chunk missing, probably from carelessly cramming it in the safe..

I think the EDC has only been on my belt once because the horizontal sheath has so little retention it’s not safe to carry…. Also, the stitching on the loop of the horizontal sheath is a little loose, allowing the loop to move freely…

The buffalo horn bolsters on the Heavy Hunter have slightly separated from the knife but seem secure. They may last forever and they may not. I’m not sure what it’s from but it may have something to do with me leaving it in my truck in sub-zero temps a while ago.. I’ve tried to capture the daylight between the bolsters and knife in my pictures.

Handle materials on both were upgrades. Red gum is native to Australia IIRC.

The grinds aren’t perfect and there’s a blemish or two. See pictures below.

 

[Wishfulthinker580]

I’m the original owner of both of these Von Gruff knives.

Both have opened a few packages and such but that’s about it. I have not sharpened them but I know I used the honing steel on the Heavy Hunter (can’t remember for sure if I used it on the EDC).

I want to say I’ve carried the Heavy Hunter a few times. It’s sheath has a significant chunk missing, probably from carelessly cramming it in the safe..

I think the EDC has only been on my belt once because the horizontal sheath has so little retention it’s not safe to carry…. Also, the stitching on the loop of the horizontal sheath is a little loose, allowing the loop to move freely…

The buffalo horn bolsters on the Heavy Hunter have slightly separated from the knife but seem secure. They may last forever and they may not. I’m not sure what it’s from but it may have something to do with me leaving it in my truck in sub-zero temps a while ago.. I’ve tried to capture the daylight between the bolsters and knife in my pictures.

Handle materials on both were upgrades. Red gum is native to Australia IIRC.

The grinds aren’t perfect and there’s a blemish or two. See pictures below.
View attachment 674793
View attachment 674794
View attachment 674795
View attachment 674797
View attachment 674798
View attachment 674799
View attachment 674800
View attachment 674801
View attachment 674802

 

[Wishfulthinker580]

View attachment 674803
View attachment 674804
View attachment 674805
View attachment 674806
View attachment 674807
View attachment 674808
View attachment 674809
View attachment 674810
View attachment 674811

 

[Wishfulthinker580]

View attachment 674812
View attachment 674813
View attachment 674814
View attachment 674815
View attachment 674816
View attachment 674817

 

[Smo1127]

Love the lines on the Heavy Hunter, i did not see price on it? If its pay it forward id take and use it immediately!!

Steve

 

[V.Veritas]

View attachment 674803
View attachment 674804
View attachment 674805
View attachment 674806
View attachment 674807
View attachment 674808
View attachment 674809
View attachment 674810
View attachment 674811

Beautiful knives.
You posted these on the wrong thread or you are just bragging?
Went well with my morning coffee though. Thanks for sharing them with us.

 

[Wishfulthinker580]

Love the lines on the Heavy Hunter, i did not see price on it? If its pay it forward id take and use it immediately!!

Steve

Leaving for work. Will post in a bit. Both knives are free (separately) to good homes in the spirit of pay-it-forward.

Beautiful knives.
You posted these on the wrong thread or you are just bragging?
Went well with my morning coffee though. Thanks for sharing them with us.

 

[Tubby’s Canteen]

Leaving for work. Will post in a bit. Both knives are free (separately) to good homes in the spirit of pay-it-forward.

I’d like to claim the other of the two if your willing to ship to Canada , I can cover shipping if needed.

Which ever @Smo1127 doesn’t choose

 

[Bonk]

Good morning. If there’s one left I’d like to have it please.

 

[V.Veritas]

Leaving for work. Will post in a bit. Both knives are free (separately) to good homes in the spirit of pay-it-forward.

I would like to claim the smaller one if it's still available and you could ship to Canada.
I will cover the cost of shipping of course.

 

[thoma018]

I will put up a set of lee 300WM dies

I just picked up an older 300 win mag and could certainly use the 300WM dies....if still available....

 

[rookhawk]

Leaving for work. Will post in a bit. Both knives are free (separately) to good homes in the spirit of pay-it-forward.

I’d love the EDC if available ?

 

[mdwest]

Leaving for work. Will post in a bit. Both knives are free (separately) to good homes in the spirit of pay-it-forward.

Incredibly generous @wishfulthinker … Garry does great work..