Nhoro
AH elite
- Joined
- Sep 16, 2014
- Messages
- 1,030
- Reaction score
- 1,983
- Location
- Harare,Zimbabwe
- Media
- 29
- Member of
- Cleveland Gun Club
- Hunted
- Zimbabwe
Where’s the video of the remote charging target? I haven’t seen it. Or is it top secret?
Where’s the video of the remote charging target? I haven’t seen it. Or is it top secret?
I have spent many hours working on my rifle.there are 3 things that determine feeding and almost all factory rifles are wrong from the factory because they mass produce one action for a whole bunch of cartridges.I’ve had the same type of chambering issues with my CZ .458 Lott using factory 500gr Nosler Partitions. The round sometimes hangs up on the chamber mouth. I believe in my case, the magazine spring isn’t strong enough to fully push the rim into the bolt face before the cartridge attempts to enter the chamber?
I’ve had the same type of chambering issues with my CZ .458 Lott using factory 500gr Nosler Partitions. The round sometimes hangs up on the chamber mouth. I believe in my case, the magazine spring isn’t strong enough to fully push the rim into the bolt face before the cartridge attempts to enter the
CZ 550 in 458 win mag. It isn't the magazine spring although that may help. CZ magazine- actually the reciever that forms the top of the magazine is a bit narrow. Then the feed ramp is a bit high as well. It is a bit counter intuitive but this means the bullet nose goes too far -past the chamber and jams on the opposite edge of the chamber ?What brand of rifle are you using? Just curious?