JMJ888
AH veteran
This one stings to let go of but it’s not getting any use and needs a good home.
Left Hand CRF New Haven Winchester M70
23.5” Brux Stainless 1 in 12 twist barrel #5 contour
NECG adjustable rear sight and masterpiece banded front sight with red bead
Talley bases opened to 8-40 screw holes
Secondary recoil lug
Jewell trigger set at 2lbs - adjustable up or down as desired.
Williams 1 piece bottom metal
NECG Barrel mounted sling stud
All metalwork completed by John Farner in NM.
Cerakoted black on all metal work.
I fired about 7 rounds through it when it was in the original factory wood stock with no bedding for sight in and accuracy. Easily held 1” with 300gr factory Barnes TSX at 100yds.
After that I was able to talk Darcy Echols into ordering two of his Legend McMillan stocks as left handed flat tops and sent one off with the metalwork to Chad Dixon at LRI in Sturgis. They CNC inlet the metal into the stock and used their pillar bedding process which creates one of the prettiest bedding jobs I’ve seen. They also inlet a rear sling stud, painted the stock Magpul FDE with black speckles and finished it over a 1” red Decelerator. Length of pull is 14.75” as it sits now and right at 9lbs on my scale.
Anybody that has handled the Echols stocks knows it’s one of the best feeling/fitting synthetic stocks made. I have not fired it since I got it back from LRI and would like to see it go to a good home.
Asking $5750 + shipping to FFL. Located in NW Houston and can meet local within decent radius.
Left Hand CRF New Haven Winchester M70
23.5” Brux Stainless 1 in 12 twist barrel #5 contour
NECG adjustable rear sight and masterpiece banded front sight with red bead
Talley bases opened to 8-40 screw holes
Secondary recoil lug
Jewell trigger set at 2lbs - adjustable up or down as desired.
Williams 1 piece bottom metal
NECG Barrel mounted sling stud
All metalwork completed by John Farner in NM.
Cerakoted black on all metal work.
I fired about 7 rounds through it when it was in the original factory wood stock with no bedding for sight in and accuracy. Easily held 1” with 300gr factory Barnes TSX at 100yds.
After that I was able to talk Darcy Echols into ordering two of his Legend McMillan stocks as left handed flat tops and sent one off with the metalwork to Chad Dixon at LRI in Sturgis. They CNC inlet the metal into the stock and used their pillar bedding process which creates one of the prettiest bedding jobs I’ve seen. They also inlet a rear sling stud, painted the stock Magpul FDE with black speckles and finished it over a 1” red Decelerator. Length of pull is 14.75” as it sits now and right at 9lbs on my scale.
Anybody that has handled the Echols stocks knows it’s one of the best feeling/fitting synthetic stocks made. I have not fired it since I got it back from LRI and would like to see it go to a good home.
Asking $5750 + shipping to FFL. Located in NW Houston and can meet local within decent radius.
Last edited by a moderator: