Fincher's Corner, engraving and polishing services.

[teklanika_ray]

Pam at fincher's corner has done some spectacular engraving for me. She seems to only be limited by my imagination, and I keep upping the game.

Here are some projects I have asked her to do. These are all on Mauser 98 actions, but I have move upto having work on a few of my CZ builds I have coming up. I really can't wait to see her work on those.

This is a 458 win mag I purchased off of Gun Broker as a barreled action. It was missing every thing else. So I went digital garage saling and found every piece I needed. Sent the big pieces to Pam, and she engraved the Husqvarna H onthe floor plate and grip cap, and the 458 win mag on the bolt (which was important as there were now caliber makings at all on the barrel). Then I found the drop plate lower metal and sent that in to Pam and asked her for a bear and realistic grizzly tracks across the trigger guard. Which I believe she nailed.

Then I bought a Winchester model 70 chambered in 459 Lott, and hab her do the bear and bearbtracks again on that one.

Next is a few mauser floor plates I have had her do for some big bore VZ24 projects I'm working on.
.

Finally, I had her personalize my 11 year old sons 8 mm mauser. He insists on using it as his bear gun. I'm also sending in his bolt and trigger guard for some engraving work. It should look really awesome when it is done.

Give Pam a call if you have any engraving needs. She really is customer oriented and her service is amazing.
+19362759042
www.fincherscorner.com

 

[teklanika_ray]

 

[mdwest]

I’ve used Finchers on 3 different rifles. They did engraving on 2, and polished a bolt on another…

They do nice work at a very reasonable price and have a really fast turn around as well…

I wish Doug was still bending bolt handles on Mausers. I had him turn a couple of pre war straight 98 bolts into really nice “sporters” for me before he stopped doing that work…

 

[teklanika_ray]

I’ve used Finchers on 3 different rifles. They did engraving on 2, and polished a bolt on another…

They do nice work at a very reasonable price and have a really fast turn around as well…

I wish Doug was still bending bolt handles on Mausers. I had him turn a couple of pre war straight 98 bolts into really nice “sporters” for me before he stopped doing that work…

Ya, they are very amazing. I have never had to wait, and your right, thier polishing is pretty great too.

 

[eyedok]

They did some work for me last year, very fast turnaround, i had them put a leopard on the Model 70 i used for it, lion was put in the .300 HH that was used, and a buffalo on my .375 i used for my best 2 buff, am hoping for them to do an elephant on the .416 Rigby i am using on the elephant hunt in a month, excellent service, i would highly recommend them too

 

[BlueFlyer]

That all looks like it is laser engraving rather than hand engraving, is that correct?

 

[mdwest]

Correct.. they do laser engraving

 

[teklanika_ray]

They did some work for me last year, very fast turnaround, i had them put a leopard on the Model 70 i used for it, lion was put in the .300 HH that was used, and a buffalo on my .375 i used for my best 2 buff, am hoping for them to do an elephant on the .416 Rigby i am using on the elephant hunt in a month, excellent service, i would highly recommend them too

Sample one is what I'm having her put of a CZ 550 cambered in 505 Gibbs. I can't wait to see what she does. She always makes my ideas better and sends them back.

 

[teklanika_ray]

View attachment 642091Sample one is what I'm having her put of a CZ 550 cambered in 505 Gibbs. I can't wait to see what she does. She always makes my ideas better and sends them back.

Then I'm having her put the big 5 petrogligh over the trigger guard. Not sure what I'm doing for the grip cap, maybe just a 505 Gibbs scroll.

 

[Rare Breed]

Pam at fincher's corner has done some spectacular engraving for me. She seems to only be limited by my imagination, and I keep upping the game.

Here are some projects I have asked her to do. These are all on Mauser 98 actions, but I have move upto having work on a few of my CZ builds I have coming up. I really can't wait to see her work on those.

This is a 458 win mag I purchased off of Gun Broker as a barreled action. It was missing every thing else. So I went digital garage saling and found every piece I needed. Sent the big pieces to Pam, and she engraved the Husqvarna H onthe floor plate and grip cap, and the 458 win mag on the bolt (which was important as there were now caliber makings at all on the barrel). Then I found the drop plate lower metal and sent that in to Pam and asked her for a bear and realistic grizzly tracks across the trigger guard. Which I believe she nailed.View attachment 641982View attachment 641985View attachment 641983View attachment 641984View attachment 641986View attachment 641987

Then I bought a Winchester model 70 chambered in 459 Lott, and hab her do the bear and bearbtracks again on that one.
View attachment 641994

Next is a few mauser floor plates I have had her do for some big bore VZ24 projects I'm working on.
.
View attachment 641995
View attachment 641996

Finally, I had her personalize my 11 year old sons 8 mm mauser. He insists on using it as his bear gun. I'm also sending in his bolt and trigger guard for some engraving work. It should look really awesome when it is done.

Give Pam a call if you have any engraving needs. She really is customer oriented and her service is amazing.
+19362759042
www.fincherscorner.com

I really appreciate your post!!! My dad’s old Ruger 30-06 had a cracked stock so I replaced the stock. I wanted to do something like this to it so I have chosen a detailed leopard with scroll on the floor plate and my initials. Paid on their easy to use website last night. Pam sent me an email saying once she receives the floor plate she will send me some examples for us to land on

Thanks!!!

 

[teklanika_ray]

View attachment 642091Sample one is what I'm having her put of a CZ 550 cambered in 505 Gibbs. I can't wait to see what she does. She always makes my ideas better and sends them back.

Here is the actual part.

 

[Rare Breed]

Love it! Pam is sending me samples of my leopard this week!!!

 

[teklanika_ray]

Oh man, You have to post a picture when you get it back.

 

[Rare Breed]

Here is the one I approved from Pam

 

[teklanika_ray]

That is going to look amazing!

 

[teklanika_ray]

I got a package from Fincher's Corner.

 

[Rare Breed]

They all look great but the elephant in the middle is exceptional!!!!

 

[teklanika_ray]

Yes, I think I will make it much larger on the next one I do.