Can you move a barrel band front sight?

[Axle2010]

God morning gents I have a question in a new to me rifle I just picked up. I bought a Lipseys edition Ruger Hawkeye African in 35 Whelen and I was thinking that it was threaded like my 416 is but it's not, it probably doesn't need it recoil wise but I'd like to play around with a supressor and pistol bullets and maybe some extra heavies for nighttime pigs. It has a nice barrel band brass bead front sight that'll have to be moved back to be threaded, I don't want to cut and reinstall i don't want to shorten the barrel. Can it be heated and moved back an inch it two or is it bonded to the barrel somehow? Thanks for any info

 

[Ontario Hunter]

Likely silver soldered. But maybe glued on with epoxy. Heat it some and see if it releases. Reattaching may be tricky. Barrels are tapered and yours may be too thick further back from muzzle to accept the same barrel band.

 

[Grumpy gumpy]

A picture would help, in may need the sight insert removed to check for a screw beneath it,or as stated it could be soldered on, most likely you will need to remove it completely and clean it up inside and the barrel, then either ream or carefully hammer it back onto the barrel to stretch the metal to fit where you want it to be, then resolder, or if screwed on, drill and tap. Then you’ll need the thread cut before refitting. Not something for anyone to do, it is easy to make a mess of it
Gumpy

 

[Axle2010]

A picture would help, in may need the sight insert removed to check for a screw beneath it,or as stated it could be soldered on, most likely you will need to remove it completely and clean it up inside and the barrel, then either ream or carefully hammer it back onto the barrel to stretch the metal to fit where you want it to be, then resolder, or if screwed on, drill and tap. Then you’ll need the thread cut before refitting. Not something for anyone to do, it is easy to make a mess of it
Gumpy

Oh I have no intention of doing it myself I just want to know if it's doable without having to cut it and put on a new one. I'll post some pics when I get home. Thanks