Alliant powders

Luvthunt

AH legend
Joined
Aug 4, 2018
Messages
2,102
Reaction score
2,078
Media
2
In another thread on this web site there was info on using RE 17 in the 375HH . So I Emailed Alliant for load data. The return Email stated they do not furnish load data and it is the responsibility of the bullet manufacturer to do so.

Never heard this in the past. Guess Alliant is not interested in selling powder.
 
In another thread on this web site there was info on using RE 17 in the 375HH . So I Emailed Alliant for load data. The return Email stated they do not furnish load data and it is the responsibility of the bullet manufacturer to do so.

Never heard this in the past. Guess Alliant is not interested in selling powder.
Plenty of data on their website.

.https://www.alliantpowder.com/reloaders/default.aspx
 
Alliant Powder’s website has extensive load data and bullet combinations available.
 
Not with Re 17 for the 375HH

Just an FYI, I checked Ammo Guide for RL 17 loads. For Alliant powders, they list 39 loads. All but five list RL15 and only one for RL17 using Peregrine 300 gr bullets. For 350 Barnes TSXFB, there's two loads with RL26. Alliant's website recommends RL15 also.
 
Alliant recently had a 30% across the board price increase.
Winchester, Hodgson, Accurate and Ramshot have not increased their prices as much as Alliant, as an example I bought some Accurate 2230 three years ago, $29.00 for a pound, same store today $34.00.
 
Alliant recently had a 30% across the board price increase.
Winchester, Hodgson, Accurate and Ramshot have not increased their prices as much as Alliant, as an example I bought some Accurate 2230 three years ago, $29.00 for a pound, same store today $34.00.
At $34 today, it's a steal. Around here it's close to $50.
 
Alliance sells every pound of powder they can absolutely get into the United States. Which is about a fifth of what they used to be able to considering that they can only put powder on one cargo container per cargo ship.
 
Of all the loads for 375 H&H published at loaddata.com, they have exactly zero published loads for 300 gr and RL-17.

Of all the reloading guides I own (nosler, norma, swift, speer, hornady (9, 10, and 11), lyman (49 and 50), barnes, and woodleigh, the one and only that lists any RL-17 with 300 gr pills is Woodleigh.
 
In another thread on this web site there was info on using RE 17 in the 375HH . So I Emailed Alliant for load data. The return Email stated they do not furnish load data and it is the responsibility of the bullet manufacturer to do so.

Never heard this in the past. Guess Alliant is not interested in selling powder.
I posted the data that Alliant gave me for RL17 on that other thread in case you were interested. I have been using it exclusively for 375H&H and 375 Ruger for years.
 

Forum statistics

Threads
64,522
Messages
1,420,814
Members
130,792
Latest member
ValentinOw
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top