KuduKiller
AH senior member
- Joined
- Aug 14, 2014
- Messages
- 75
- Reaction score
- 97
- Location
- Bowling Green
- Media
- 22
- Member of
- SCI
- Hunted
- South Africa, Ohio, Texas, Tennessee, Indiana, Mississippi, Louisiana, Maine, Alabama, Georgia, Washington, Wyoming,,, I am sure I missed one or two states.
Well let me start off by saying this, sorry to who may not like this. After serious debate for months and asking opinions on this site I added a Terminator T3 brake to my rifle. I was unable to deal with the recoil anymore but I did take plenty of PG and DG with it in the past. So here are a few pics and a horror story with it.
On 12/14/24 I took my rifle to a “reputable” gun smith near where I live in Kentucky who was going to thread the barrel for me. Upon dropping it off I was told “it may be a few weeks before I get to it” so I gave him a few weeks then a phone call. Let’s just say after a call every 2 weeks for 2 1/2 months I decided to take my business elsewhere but upon calling the guy he told me magically he would start on it the next day. 3 days later I received a call telling me it was ready. Upon picking the rifle up he told me “well, the barrel band at the end of the barrel gave me some grief but I got it off and had to fix your bluing.” I thought ok, well you had to heat the barrel to get the band off but after inspecting the rifle I noticed almost the whole barrel from the dovetail to the end of the barrel was splotchy like he went over the whole thing with a torch and charged me $100 over what he quoted! Me being me I thought it was wise I just left and not do what I wanted to do to the older veteran, which I am as well.
I finally got a chance to fire my rifle Friday and noticed as I put a round in, it was like the trigger didn’t reset as I drove the bolt forward. I fired the rifle and was very happy with the brake but I wanted to put another round down range. I racked another round and the same thing happened! The trigger didn’t reset! I racked another round and it fired but I had had enough! I took the rifle home knowing I was dropping it off to be cerakoted that night from where you know who had made my barrel look like trash. I decided to pull the stock off and without much surprise the trigger/sear spring fell out and no, it wasn’t broken, the gunsmith got me again. I put the assembly back together correctly and took it for cerakote.
Hopefully all the drama with my rifle is over now and I can get it tuned up for Hippo in June!
On 12/14/24 I took my rifle to a “reputable” gun smith near where I live in Kentucky who was going to thread the barrel for me. Upon dropping it off I was told “it may be a few weeks before I get to it” so I gave him a few weeks then a phone call. Let’s just say after a call every 2 weeks for 2 1/2 months I decided to take my business elsewhere but upon calling the guy he told me magically he would start on it the next day. 3 days later I received a call telling me it was ready. Upon picking the rifle up he told me “well, the barrel band at the end of the barrel gave me some grief but I got it off and had to fix your bluing.” I thought ok, well you had to heat the barrel to get the band off but after inspecting the rifle I noticed almost the whole barrel from the dovetail to the end of the barrel was splotchy like he went over the whole thing with a torch and charged me $100 over what he quoted! Me being me I thought it was wise I just left and not do what I wanted to do to the older veteran, which I am as well.
I finally got a chance to fire my rifle Friday and noticed as I put a round in, it was like the trigger didn’t reset as I drove the bolt forward. I fired the rifle and was very happy with the brake but I wanted to put another round down range. I racked another round and the same thing happened! The trigger didn’t reset! I racked another round and it fired but I had had enough! I took the rifle home knowing I was dropping it off to be cerakoted that night from where you know who had made my barrel look like trash. I decided to pull the stock off and without much surprise the trigger/sear spring fell out and no, it wasn’t broken, the gunsmith got me again. I put the assembly back together correctly and took it for cerakote.
Hopefully all the drama with my rifle is over now and I can get it tuned up for Hippo in June!
Last edited by a moderator:
