8-gauge cleaning tools?

matt85

AH legend
Joined
Jan 7, 2014
Messages
3,297
Reaction score
4,042
Location
WA, USA
Media
29
Hunted
USA, South Africa, and Namibia
I'm looking for some cleaning tools such as bore brushes and swabs for an 8 gauge (technically it's a rifle, but you shotgun guys may be able to help).

I found plenty of them for sale in Europe... but none have been willing ship to the USA. My searching has yielded nothing available in the USA.

Any suggestions?

Thank you
-Matt
 
Contact Boretech and Dewey rods. They may have them in stock, or be able to offer some guidance as to where to find.
 
I'm looking for some cleaning tools such as bore brushes and swabs for an 8 gauge (technically it's a rifle, but you shotgun guys may be able to help).

I found plenty of them for sale in Europe... but none have been willing ship to the USA. My searching has yielded nothing available in the USA.

Any suggestions?

Thank you
-Matt


You should be able to find them. Remington still makes 8-bore shells, so I bet there are 8-bore cleaning supplies available.

What's that? Remington makes 8-bore shells? Yep, they are industrial loads for some sort of factory gun designed to shoot slag off the inside of some pit/reactor/tank. I would assume with great confidence that the gun these industries are using for these industrial loads require a cleaning brush/mop, it just isn't marketed to the sporting community.

I'd think you could also find some sort of oversized nylon or brass brushes that you could chuck up in a lathe and cut down to roughly the bore diameter of an eight bore.

Last thing I'd check into is what military heavy calibers exist on gunships, artillary, etc. that may approximate 8-bore. You may find a cheap milsurp source for a 22mm gun's cleaning supplies.
 
I think @rookhawk is onto a good lead there, I use Industrial 8ga cases from Winchester, some times Remington for my Guns & Rifle (I don't own a 8 Bore rifle right now) these are from Cement Works here, on that no one will release them just now.

Any way Remington & Winchester both sell Industrial/Kiln Guns/Cannons these are used in a lot of ways & many different industry's, as suggested these would differently need cleaning ?

As a side note the Black Remington cases are the strongest cases but nothing wrong with the White/semi clear Winchester case, I haven't used any of the Red cases.

PS are you sure a UK supplier will not send to you, as I'm sure they are one of the few county's that will send to us in NZ, can't get any thing from the US here ?

 

Attachments

Last edited by a moderator:
8gauge@olin.com is winchester/western’s contact info. They make an 8-bore cleaning kit shown below for their industrial 8-gauge guns:

IMG_0691.jpeg
 
Good Evening Matt85,
I'm in the UK were big bore shotguns are still popular in wildfowling clubs. I use a ten bore occasionally. I know a chap that had a 2 bore mounted on a punt!

If you are still looking for 8 bore cleaning gear. You might try looking at the Holts auctions website or a specialist dealer call Giles Marriott. I know both export to the US.

www.gilesmarriott.co.uk www.holtsauctioneers.com


29872001_10155385576919327_5919135383094859269_o.jpg
123652070_10157676949189327_8763163576546660900_o.jpg
 
I ended up finding some gear at https://www.napierusa.com/

These have been working very well:

For a cleaning jag, I'm using this (built up with extra patches)

Another member here sent me some 8-bore mops and brushes as well, thank you all!

-Matt
 

Attachments

Forum statistics

Threads
65,481
Messages
1,445,418
Members
136,285
Latest member
MicahBurr
 

 

 

Latest posts

Latest profile posts

Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
mcr wrote on gbflyer's profile.
Hello - I was looking at your post from several years ago regarding the Winchester 300 H&H. Any chance you still have the lefty M70 300 H&H for sale?
Thank you, Mike
'68boy wrote on Rare Breed's profile.
Wife and I will attend ah dinner in Nashville Friday night. Jay Sheets and wife Chris
crossfire3006 wrote on Hornedfrogbbq's profile.
An excellent AH member right here! I had a fantastic transaction with Hornedfrogbbq (I was the seller). His communication was first rate, payment was extremely fast, and I would have absolutely no reservations at all dealing with him again. Thank you, F!
 
Top