404 Jeffery Heym Express By Martini Rifle For Sale

[Martin77]

What is the length of pull?

Single-Stage, Set at a Crisp 3.5 lbs With no Creep and no Over-Travel

 

[Martin77]

What's the overall weight with optics? Do you have brass, dies, ammo? What loads is it regulated with?

10 lbs

 

[Martin77]

What is the length of pull?

Single-Stage, Set at a Crisp 3.5 lbs With no Creep and no Over-Travel

 

[deewayne2003]

Single-Stage, Set at a Crisp 3.5 lbs With no Creep and no Over-Travel

Martin77 …. I believe he was asking about the stocks LOP; meaning the distance from center of butt pad to the trigger.

 

[Martin77]

What is the length of pull?

14.5

 

[svinejakt]

I have one like that in 375H&H, without a doubt my favorite rifle. Amazing to shoot and as smooth as rifles goes Can recommend it, good luck with your sale!

 

[358 Norma]

That rifle is so beautiful it makes my soul hurt!

Mostly because I went the route of building a custom .404 and took a drastic wrong turn in my selection of gunsmith, and point being…..

If someone out here is thinking of having a custom .404 built; I’d be willing to bet that before it’s all over and done with, purchasing this Martini ready to hunt will save you countless headaches and dollars vs. trying to get a custom built.

Would that have been a fellow who calls himself the real gunsmith?

 

[deewayne2003]

Would that have been a fellow who calls himself the real gunsmith?

No it was Dan Pederson “Classic Barrel & Action” Prescott Arizona.

 

[450 Rigby]

I do have ammo and a pelican case that has special foam insert fit for this rifle. No brass no dies and it was regulated with Hornady.

It's definitely a beautiful rig. The 14.5" LOP is a bit long for my tastes. I'm 5'11 and find a 14" LOP is about right.

Does it hold 4 in the magazine plus 1 in the spout?

 

[Paul G]

I am in a desperate search of a Heym 375 LH Martini myself. I am wondering what is the Price with and without the Swarovski Scope? If I able to find a 375 Heym I will have an idea what to pay.
Did I miss the price you are selling your 404?

Just call Chris and ask him

 

[enysse]

Beautiful rifle!

 

[Martin77]

It's definitely a beautiful rig. The 14.5" LOP is a bit long for my tastes. I'm 5'11 and find a 14" LOP is about right.

Does it hold 4 in the magazine plus 1 in the spout?

Correct 4+1

 

[Tokoloshe Safaris]

I could be wrong, but I doubt if the extractor was beveled to allow one up the spout, while 4 in the magazine. I could be wrong, but I do not think Paul would have liked that idea.

 

[krish]

This what internet says.

4+1

404 Jeffery & 458 Lott | Magazine capacity 4+1 in all calibers | Cartridge-specific magazine | Barrel-banded front sight, rear sight and sling swivel.

https://www.heymusa.com › ...
PDF

HEYM “EXPRESS” BY MARTINI​

 

[Tokoloshe Safaris]

You may be right then.

 

[krish]

Regardless of what internet or Heym say, if the magazine takes 5 with no problem then it is 4+1.
If it only takes 4 in the magazine comfortably then it is 3+1.
I have been fooled by CZ 416 Rigby's. The box says 3+1. But most of them only take 3 in the magazine. That is not 3+1.
Krish

 

[Tokoloshe Safaris]

Regardless of what internet or Heym say, if the magazine takes 5 with no problem then it is 4+1.
If it only takes 4 in the magazine comfortably then it is 3+1.
I have been fooled by CZ 416 Rigby's. The box says 3+1. But most of them only take 3 in the magazine. That is not 3+1.
Krish

I agree with you Krish, but personally I never put 1 up the spout and then close the bolt on that round, of course I do not own a push feed rifle. I own m-70, CZ, Rigby & Jefferies (M-98).

 

[krish]

@Tokoloshe Safaris
If the bolt dont pick the round from the magazine then it dont count in my books. I dont like to monkey around like that..
Just bought m98 mauser expert in 450 rigby. It takes 4 in the magazine comfortably. That is what i call 3+1. That is plenty for any hunting if you do your job.
Krish

 

[Martin77]

The rifle sold. Thanks everyone!