375 ready to hunt

rbros

AH member
Joined
Mar 13, 2021
Messages
46
Reaction score
72
Location
Bastrop, TX
Member of
Life Member SCI, MDF, NRA Life
Hunted
USA, Canada, Spain, South Africa
Getting a couple of rifles ready to go for my July trip. Finally settled on a load for my 375 h&h improved. Running 300gr a frames at 2800. Target is 5 shots at 100 yds using the bullet hole as my aim point. Swapped out the scope for a Nightforce NX8 1-8 and now it’s ready to roll. Now to get the plains game rifle ready.
IMG_7338.jpeg

E08A1D12-5483-4763-A925-D1E1E55A5CC0.jpeg
 
Getting a couple of rifles ready to go for my July trip. Finally settled on a load for my 375 h&h improved. Running 300gr a frames at 2800. Target is 5 shots at 100 yds using the bullet hole as my aim point. Swapped out the scope for a Nightforce NX8 1-8 and now it’s ready to roll. Now to get the plains game rifle ready.
View attachment 589364
View attachment 589365
Looks like your PG rifle is also ready to go. Many years ago, I brought two rifles on my first safari (Namibia). I fired both to check zero and the "PG" rifle never left the case again. The .375 turned out to be perfect for everything. I also have learned to hate schlepping heavy gun cases. A single all purpose rifle is the perfect solution.

That is rather startling FPS achievement with a 300 gr bullet.
 
Looks like your PG rifle is also ready to go. Many years ago, I brought two rifles on my first safari (Namibia). I fired both to check zero and the "PG" rifle never left the case again. The .375 turned out to be perfect for everything. I also have learned to hate schlepping heavy gun cases. A single all purpose rifle is the perfect solution.

That is rather startling FPS achievement with a 300 gr bullet.
I’m considering it. Barnes 250 ttsx have the same zero point of impact and run 2950. I may just put the 3-12 s&b back on it and run it.
 
I’m considering it. Barnes 250 ttsx have the same zero point of impact and run 2950. I may just put the 3-12 s&b back on it and run it.
I use 300 for everything, and have never had to pass on a shot because of a range limitation.
 
Why do u want it up at 2800 2900 in a 375
Way too fast for my liking
 
Why do u want it up at 2800 2900 in a 375
Way too fast for my liking
Just where it ended up during load workup. I may drop back and look for a lower node around 2700. I’m on my 7th firing now with my test brass using that 2800fps load and my pressure gauge shows I’m still about 10% below max pressure.
 
I assume that is a rifle from your company. “Rbros” ?

I like the look of it. Can we see some closeups. And hear some details. Trigger, barrel, safety stock
 
I assume that is a rifle from your company. “Rbros” ?

I like the look of it. Can we see some closeups. And hear some details. Trigger, barrel, safety stock
Yes, it’s one of my builds. I’m not a sponsor yet so I’m not to promote. It’s one of my crf actions w/3 pos safety, triggertech, krieger barrel and a modified manners uc-plus stock.
 
That is a very nice four shot group....if I were you, I wouldn't touch a thing, leave the scope as is, leave the load as is... leave everything as is... this recommendation is of course assuming that the feeding and extraction are smooth and without a catch or hiccup.
P.S - I echo the one rifle sentiment... this one will do it all.
 
That looks ready to go, to me. That's a screaming fast load. Haven't played with RL16 yet, was this data published or free based using your pressure gauge?
 
Travis, can you add some New England masterpiece sights
 
Great setup for success. All the best.
 
Rbros, cudos that is one hell of a group. I too thought your velocity was / is much faster than normally achieved. So just for the heck of it I ran a QuickLoad simulation for a 26" barreled 375 H&H AI using 300 Gr. SAF(s) and Reloader 16. To get 2800 FPS it was only a shade over 12,000 lbs above the SAMI Max Pressure. I understand that QuickLoad isn't perfect, it has also been proven to be very close in most cases.
 

Forum statistics

Threads
66,627
Messages
1,474,274
Members
141,459
Latest member
Beudy1021
 

 

 

Latest profile posts

7x57Joe wrote on HunterX's profile.
How much is your friend asking for his M-S 8x56? Thanks
David jr wrote on Green Chile's profile.
Hello I am wanting the same thing done on a elephant in 2027 please keep me informed on how it is going
Is the 6 panels the whole elephant of just half
David Williams
Shotgun Coach wrote on Tdruck's profile.
In the RSA
Turner024 wrote on JG26Irish_2's profile.
Would you be willing to talk sometime about your experience with RDB? More so what you would recommened taking. I will be going in May.
 
Top