When I load A-Frames I take advantage of the cannelure to crimp. So I try to use brass that has been trimmed to similar lengths and let the COAL be set by the cannelure.
As to maximum charge of RL15, I wouldn't trust any number that someone gave me to the point of going straight to that charge.
Here is a link to Alliant and some info there for a different bullet. I would start well below the amount shown and work up.
dchamp - Thanks for the quick response. Very much appreciated.
Phoenix Phil - Agreed on the cannelure and not going straight to MAX. Reduce and work up. The Alliant page lines up with what Swift states. Swift Max = 71.5 and Alliant shows max with a 270 Speer at 71.
Anybody have a pet load for that bullet and powder combination that they want to share?
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.