What did you reload today?

[458 Exp]

Where can I get my grubby paws on some of those SBC 180gr bullets?
Can’t seem to find a website for them.

You have a PM

 

[Nevada Mike]

I am working on finalizing a load for my 280AI M70.

 

[mdwest]

Hah, that's great. One thing I'm looking at ordering this weekend is the .308 200 gr. Lazer for my 300 PRC. CEB told me it's NOT single feed and works great from mag boxes in 300 PRC. That bullet would be a hammer for a mountain rifle.

How’d those 200gr lazers work out?

I’ve got 250 pieces of once fired brass, a thousand magnum primers, and a couple of different powders set aside… I’m planning on working up a load for my 300 prc soon..

Was primarily considering 208gr LRX or 190gr cx.. but neither are in stock locally anywhere.. so if I’m ordering online I thought I might consider multiple options..

 

[Green Chile]

How’d those 200gr lazers work out?

I’ve got 250 pieces of once fired brass, a thousand magnum primers, and a couple of different powders set aside… I’m planning on working up a load for my 300 prc soon..

Was primarily considering 208gr LRX or 190gr cx.. but neither are in stock locally anywhere.. so if I’m ordering online I thought I might consider multiple options..

I haven’t loaded them yet but plan to soon. They look fantastic.

 

[Mr. 16 gauge]

100 rounds of 16 gauge buckshot (12 pellets of #1 buck); 50 rounds of 12 gauge bismuth (duck load....1 1/4 ounce of #4) and 25 rounds of 20 gauge bismuth (1 oz of #5s).

 

[SFRanger7GP]

I have been working up 275 Rigby loads using Norma 160 TipStrike and Vulkan bullets and North Fork 160’s. Can’t get the North Forks to the velocity I would like.

Safe shooting

 

[Berettaco]

Bought a new rifle in a totally unnecessary new cartridge I didn’t need. 26 Nosler. Loaded up 5 different loads to see what it likes. Attached a pic of it next to a 6.5 creedmore - also an unnecessary cartridge for another new rifle I didn’t need

 

[FlyGuy]

Found a box of 168gr TSX in the reloading room.
Thought I’d try them in my 300H&H to see what kind of velocity I’m getting.
VV N555

 

[Tundra Tiger]

6.5 Grendel, using 156 grain Lapua Megas, for a new to me CVA Scout pistol.... I will give them a whirl at the range tomorrow, if all goes well.

 

[Rare Breed]

Very happy…after getting my Lee crimp die in 470 NE I got both my CEB solids and Barnes TSX regulating within 0.6 inch’s with the same 84 grains of RL 15.5. before crimping my TSX was okay at within 2 inches with this load but after firing 4 groups with each there you have it…go figure

 

[Hogpatrol]

Bought a new rifle in a totally unnecessary new cartridge I didn’t need. 26 Nosler. Loaded up 5 different loads to see what it likes. Attached a pic of it next to a 6.5 creedmore - also an unnecessary cartridge for another new rifle I didn’t need

View attachment 642265

Had two 26 Noslers, RL133 and Berger 130 VLDH were deadly. My testing regime was one or two shots off the bench then let the barrel cool to ambient.

 

[AimSmall]

How’d those 200gr lazers work out?

I’ve got 250 pieces of once fired brass, a thousand magnum primers, and a couple of different powders set aside… I’m planning on working up a load for my 300 prc soon..

Was primarily considering 208gr LRX or 190gr cx.. but neither are in stock locally anywhere.. so if I’m ordering online I thought I might consider multiple options..

Pretty sure I have some of those 190cx that I won't be using. Shout if you still need them.
David

 

[Slick3006]

100 rounds of 16 gauge buckshot (12 pellets of #1 buck); 50 rounds of 12 gauge bismuth (duck load....1 1/4 ounce of #4) and 25 rounds of 20 gauge bismuth (1 oz of #5s).

I just picked up a nice Ithaca 37 in 16. Any favorites for the 1 oz loads in purple?

Thanks

 

[AimSmall]

400gr DGX bonded for the 404

 

[Puddle]

Tweaking the 350 gr. North Fork spitzer load for the H&H. Testing on Monday.

 

[Tundra Tiger]

Just for giggles and grins: this morning, some 6.5 Carcano with 120 grain Ballistic Tips.

I have not made it to the range yet. I've felt lazy, it's colder than predicted, and football is on.

 

[cash_tx]

I didn't reload today; rather I started my first attempt at refinishing a stock (Remington Model 11). Still a fair amount of work to be done.

 

[gbflyer]

210gr NP .338 Federal. Those bears aren’t asleep yet.

 

[375er]

I didn't reload today; rather I started my first attempt at refinishing a stock (Remington Model 11). Still a fair amount of work to be done.

View attachment 649291

That will look nice. What is your plan?

 

[Inkgardener]

I just picked up a nice Ithaca 37 in 16. Any favorites for the 1 oz loads in purple?

Thanks

I got one of those from my dad that was heavily neglected. I am in the process of taking it apart for a full restoration. I used it alot on rabbits in my younger days.