Semi Custom Savage 7mm-08

209hunter

AH senior member
Joined
May 10, 2023
Messages
52
Reaction score
80
Location
Central California
Hunted
USA, Argentina
I just put this rifle together but another build has peaked my interest, so I figured I’d test the waters.

This rifle started out as a Savage Model 11 Lightweight Hunter in 260 Rem. I used it for a few years and killed a few deer with it. I recently sent the barreled action to Shaw Custom Barrels to have them rebarrel the action to 7mm-08. They did a fantastic job, fit and finish is great.

The barrel is 22 inches in their #2.5 contour with helical fluting and a 11 degree crown. It’s got a 1-9.5” twist rate.

I installed Warne bases and put the barreled action into a Bell and Carlson M40 stock. I have not bedded the action yet. The rifle weighs 7 lbs 5 oz according to my scale. The triggers breaks right at 3 lbs.

Shaw fired a test round to check for function but I have not shot the rifle since it has been rebarreled. I plan to shoot it and do barrel break in once the weather gets better this spring but figured I’d post it for sale in the meantime. I’m asking $1100 shipped if your FFL will accept from an individual, otherwise add $75 for sending through my FFL. This is posted elsewhere.

Here’s some pics, let me know if you have any questions. Thanks.

IMG_8036.jpg

IMG_8039.jpg

IMG_8040.jpg

IMG_8042.jpg

IMG_8043.jpg

IMG_8045.jpg

IMG_8047.jpg
 
Seems like a lot of gun for the money. A good weight for that caliber. Not heavy but not lightweight either.
 
Would also be willing to trade. I’m mostly interested in Ruger Hawkeye’s or Ruger No. 1’s. But the worst I could say is no thanks. Let me know!
 
Great deal. Wish I was in the market. I bet she shoots great.
 
bummer. you'd have had me with a 9 twist

not all 175s will stabilize in a 9.5, which is my chief gripe with my LH Savage 280AI.
 
bummer. you'd have had me with a 9 twist

not all 175s will stabilize in a 9.5, which is my chief gripe with my LH Savage 280AI.

Yeah I understand. My plan was to be able to stabilize up to 160’s and focus mostly on 140-150’s. I think the 7mm-08 is best suited when using the 160’s and lighter bullets.
 
Yeah I understand. My plan was to be able to stabilize up to 160’s and focus mostly on 140-150’s. I think the 7mm-08 is best suited when using the 160’s and lighter bullets.

Really looking for something for my daughter. I'm a lefty.

Just throwing all this out there

I'm about convinced that 175 gr 7mm is the most perfect bullet available for all but dangerous game.

Sectional density: .310
BC: except for TSX (.41) and North Fork (.446), all of the hunting bullets are between about .46 and .52

So even at modest MV of 2500 fps, any of those bullets are still at 2k+ fps and 1500 ft lbs out to 300 yards at sea level.

Apparently a lot of guys subscribe to this theory. Other than Hornady and Nosler ABLR, nobody has any 175 gr bullets in stock, at least nowhere I can find
 
Perhaps if you dialed it in and showed the groups. That might sway someone.
 

Forum statistics

Threads
54,783
Messages
1,162,823
Members
94,843
Latest member
AnjaPflaum
 

 

 

Latest profile posts

SETH RINGER wrote on tracker12's profile.
PARTITIONS
SEND ME PAYMENT INFO, PLEASE AND THANKS.
Khalanyoni Game Ranch wrote on Joshlee0518's profile.
Hi Joshlee0518 (please let me know if you are fine being addressed like that),

Thought I would drop you a PM. It is super exciting to plan a hunt and we are more than happy to assist you. Have you given any thought yet to which species you would like to take?

What do you hunt usually and which weapons/calibers are you using?

Look forward to swapping experiences and ideas.

Happy hunting - Daniel
Our trophy shed is filling up and we are only getting started,

cwpayton wrote on CM McKenzie's profile.
Sir ,is that picture of you packing the shoshone river trail thru buffalo pass? Im trying to get a plan togather for a ride. do you pack professionally or for pleasure. thanks
Cal {cwpayton}
ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
 
Top