Home made bullets

Shot my 458 Express shooting off hand at 50m open sights. Not my best grouping but not the bullets’ fault.

Will take shooting sticks to the range next time.

Sticker is 1”

IMG_6002.jpg
 
Just got these pics sent to me from a mate I made 9.3 285gr bullets for.

He just came back from a hunt and got a very nice Waterbuck bull.

9.3x62 @ 2280 fps.

Shot the bull from the front into the chest from 120m and found the bullet in the stomach.

7d1e88c3-d41b-42f6-881f-b263b405895e.jpg

6cd90f4b-6282-4c41-9ca2-cea13354dfd3.jpg
 
I'd say you were doing darn fine work. Congrats on a work around for the current bullet shortages. I like it!
Bruce
 
I tested the 416RM this weekend with a new and improved bullet design I made; shooting them into wetpacks.

Changed the Ogive and in doing so adding a bit more copper to the nose section.

400gr at 2300 fps.

L-R 100m, 75m, 50m, 25m

IMG_6477.jpg


25m
IMG_6466.jpg


100m
IMG_6468.jpg
 
Looking really good I'm going to load some more of the 458, 500gr bullets to test it next week again to see if I can get more speed out of them as the driving bands really reduces the pressure on that long bullet.

Want to get 2200fps around there I'm close but not there yet in the Lott.
 
Well what a surprize I got today I have a load that I use for practise and competitions its a 500gr Impala bullet Mono solid with driving bands. It goes 2220fps with 82gr of Norma203B and accurate.
Last time trying the 500gr bullets speed was very low due to the driving bands to day I started at 81gr then 81.5gr and finally at 82gr of Norma 203B I got the exact same point of impact thatn the solids and quess what same speed with the same load.

If only reloading could always be so easy, very chuffed one load two bullets a soft and solid and they print 100% same at 50 meters. (y)
 
Got these pics today from a mate that hunted a giraffe this morning.

My home made bullets

.375 300gr and .458 450gr

375 @ 2500 fps
458 @ 2200 fps

View attachment 493070
@458Exp
Some in 35 cal 250gr or 225gn would be exceptional. MV of 2,700 to 2,900fps would fun.
Great bullet performance on your projectiles.
Bob
 
@458Exp
Some in 35 cal 250gr or 225gn would be exceptional. MV of 2,700 to 2,900fps would fun.
Great bullet performance on your projectiles.
Bob

Hi Bob

For now I’m focusing on 9.3 and bigger and most important caliber that I own.

I don’t think the .35 has a big following in SA but definitely something to look at once I start making more commercially.
 
Hi Bob

For now I’m focusing on 9.3 and bigger and most important caliber that I own.

I don’t think the .35 has a big following in SA but definitely something to look at once I start making more commercially.
@458 Exp
There's a lot of 35 cal lovers on this site that I'm sure would love to give them a try.
Bob
 
Looking good Rudi, results speak for themselves.
 

Forum statistics

Threads
54,753
Messages
1,162,099
Members
94,786
Latest member
kentcasinogamesMarylou
 

 

 

Latest posts

Latest profile posts

Our trophy shed is filling up and we are only getting started,

cwpayton wrote on CM McKenzie's profile.
Sir ,is that picture of you packing the shoshone river trail thru buffalo pass? Im trying to get a plan togather for a ride. do you pack professionally or for pleasure. thanks
Cal {cwpayton}
ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
 
Top