Watson Bros. London .318 Westley Richards

The35Whelen

AH senior member
Joined
Aug 7, 2022
Messages
66
Reaction score
75
Buckstix' post about the custom John Rigby bullpup reminded me I hadn't posted pictures of my newest medium bore rifle.

I purchased this Watson Bros. .318 Westley Richards from a gun shop in Bradford, Pennsylvania. The rifle is a 98 Mauser, with the receiver and bolt serial numbers both matching. The magazine floorplate serial number does not match. The rifle barrel has the Watson Bros' original address dating back to 1885 stamped on it, along with proof marks, caliber, and bullet weight regulation. The barrel is also fitted with a three-leaf rear sight (100,200,300 meters) and an ivory bead front sight. The rifle shows fine engravings on both the top and bottom of the receiver.

The stock is particularly interesting. It's curved! I believe it was custom ordered this way to accommodate a right-handed, left eye dominate shooter. The stock also has letters and numbers stamped into it on the underside just behind the pistol grip, and a red recoil pad. I'm lucky enough to be an ambidextrous rifleman and shouldering the rifle right-handed easily allows me to align my left eye on the target.

I've sent an email to Watson Bros. requesting any information they may have on the rifle and will follow up once I hear back from them. If any of you illustrious gentlemen have any info on the rifle or rifle maker, please share!

I hope you guys enjoy the quick photos I've taken. I intend to take better quality photos this week.

IMG_1254.JPEG
IMG_1256.JPEG
IMG_1257.JPEG
IMG_1258.JPEG
IMG_1261.JPEG
IMG_1263.JPEG
IMG_1264.JPEG
IMG_1265.JPEG
IMG_1266.JPEG
IMG_1267.JPEG
IMG_1268.JPEG
IMG_1269.JPEG
IMG_1270.JPEG
IMG_1271.JPEG
 
Last edited by a moderator:
Glorious rifle. Worthy of any collection. Now its time to load some ammo and take it on safari!
That’s the plan! Luckily the rifle came with dies, 40 pieces of brass, and a bullet swager. I’m looking for appropriately sized bullets since I’ve never swaged bullets before, and more brass if I can find it. The safari’s already booked for 2026!
 
I think those stamps on the stock might be home guard stamps. A lot of rifles where acquired during the 1st and 2nd WW in England and the commonwealth countries for this service. Also in the early days of the WW1 with the shortage of weapons in Kenya a lot of guys turned up with their own. They got killed and the rifle then became army stock. Could be National park stamped too. But not something that W&B would have done imo
 
That Z is really interesting. Has London proof marks on the barrel. Are there any other marks? No Y?
 
That’s a cross stock, intended exactly as you surmise, right handed, left eye dominant shooter. I’ve seen a number of them on shotguns but this is the only example I’ve seen on a rifle.
 
I think those stamps on the stock might be home guard stamps. A lot of rifles where acquired during the 1st and 2nd WW in England and the commonwealth countries for this service. Also in the early days of the WW1 with the shortage of weapons in Kenya a lot of guys turned up with their own. They got killed and the rifle then became army stock. Could be National park stamped too. But not something that W&B would have done imo
Thanks for the info! I'll do some research and see what comes up.
 
That Z is really interesting. Has London proof marks on the barrel. Are there any other marks? No Y?
The marks pictured are all I can find. There is no Y anywhere visible. I have not removed the rifle from its stock. Why do you find the Z interesting, and what would a Y indicate?
 
That’s a cross stock, intended exactly as you surmise, right handed, left eye dominant shooter. I’ve seen a number of them on shotguns but this is the only example I’ve seen on a rifle.
Thank you for the information! The rifle shoulders surprisingly well with the cross stock, though it does take a moment longer to situate my left eye on the sights than if it were a traditional stock.
 
A Z with a Y usually ment that it’s been condemned by an armour.
But with just the Z who knows. Maybe with that cross over stock it ment that not any old joy could shoot it so not fit for army use. But that’s just a guess.
 
Buckstix' post about the custom John Rigby bullpup reminded me I hadn't posted pictures of my newest medium bore rifle.

I purchased this Watson Bros. .318 Westley Richards from a gun shop in Bradford, Pennsylvania. The rifle is a 98 Mauser, with the receiver and bolt serial numbers both matching. The magazine floorplate serial number does not match. The rifle barrel has the Watson Bros' original address dating back to 1885 stamped on it, along with proof marks, caliber, and bullet weight regulation. The barrel is also fitted with a three-leaf rear sight (100,200,300 meters) and an ivory bead front sight. The rifle shows fine engravings on both the top and bottom of the receiver.

The stock is particularly interesting. It's curved! I believe it was custom ordered this way to accommodate a right-handed, left eye dominate shooter. The stock also has letters and numbers stamped into it on the underside just behind the pistol grip, and a red recoil pad. I'm lucky enough to be an ambidextrous rifleman and shouldering the rifle right-handed easily allows me to align my left eye on the target.

I've sent an email to Watson Bros. requesting any information they may have on the rifle and will follow up once I hear back from them. If any of you illustrious gentlemen have any info on the rifle or rifle maker, please share!

I hope you guys enjoy the quick photos I've taken. I intend to take better quality photos this week.

View attachment 602175View attachment 602176View attachment 602177View attachment 602178View attachment 602181View attachment 602182View attachment 602183View attachment 602184View attachment 602185View attachment 602186View attachment 602187View attachment 602188View attachment 602189View attachment 602190
Great rifle. Makes you wish you could find a list of owners and adventures since it was built.
 
I received an email from Michael Louca at Watson Bros in London. They were able to trace the rifle and provided me a nicely detailed document include image from the original order ledger. A hard copy has also been mailed to me.

The rifle was manufactured in 1925 and appears to be in original condition. I suspected the magazine floorplate might have been a replacement, but the serial number engraved there is the number used to log the rifle in Watson Bros' ledger. The cross stock and rubber recoil pad are part of the original order.

I've attached the document for anyone interested. Now to keep up the search and see if the rifle was used by the British Home Guard or as @Sideshow mentioned possibly ended up in east Africa. How it ended up in Pennsylvania is another mystery worth solving.

12CB5CE0-43AC-471B-B480-F5D377244C21.jpeg
 
Last edited by a moderator:

Forum statistics

Threads
54,718
Messages
1,161,130
Members
94,714
Latest member
RodgerO51
 

 

 

Latest profile posts

cwpayton wrote on CM McKenzie's profile.
Sir ,is that picture of you packing the shoshone river trail thru buffalo pass? Im trying to get a plan togather for a ride. do you pack professionally or for pleasure. thanks
Cal {cwpayton}
ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
SSG Joe wrote on piratensafaris's profile.
From one newbie to another, Welcome aboard!
 
Top