Wanted .25-20 Brass & Suitable Cast/Jacketed Bullets

[Green Chile]

Anything available?

 

[Bob Nelson 35Whelen]

Anything available?

@Green Chile
Try this place mate
Bob

 

[Green Chile]

Thanks for that source. I just called them and the last time they had 25-20 brass was in 2020! They do have a page that shows what is currently in stock.

 

[Spooksar]

Huntington’s has brass in stock

 

[Green Chile]

Just talked to Huntington's...they are out but hope to have some this summer.

 

[Wildcatter]

Remington and Winchester produce the brass and bullets every year or two. I stocked up in 2020 when they were available last. I suggest you do the same when they come back in stock. I was able to grab 300 brass and 500 86gr Remington bullets for regular pricing.

 

[Green Chile]

Indeed. I'm usually in good shape but starting a new caliber in this season is challenging.

 

[375Fox]

I possibly have factory loaded ammo hidden away in garage. Would you be interested?

 

[Green Chile]

Factory ammo for everything is really high right now. I'm mostly interested in brass but feel free to PM me with options.

 

[Spooksar]

Factory ammo for everything is really high right now. I'm mostly interested in brass but feel free to PM me with options.

I live in Canada and just bought a 25/20, No brass available in Canada but found loaded ammo for $134/50. It’s a start but need dies and bullet moulds now.

 

[sestoppelman]

Have seen ammo at the LGS, but quite high priced. I had a Marlin for a while, see if I still have anything left but I doubt it.

 

[Bob Nelson 35Whelen]

I live in Canada and just bought a 25/20, No brass available in Canada but found loaded ammo for $134/50. It’s a start but need dies and bullet moulds now.

@Spooksar
25-20 ammo in Australia is 179 dollars for 50. Never bought any.
Managed to get 200 new cases and 500 cast bullets for it .the 500 cast cost me $54
I load 3.4 grains of trail boss and have a ball. It's at about 1,100fps and a pound of powder is going to last a looong time.
My other load is 10 grains of 2207/4198 behind the 86gn cast for around 1,500 fps.
Cheap fun.
Bob

 

[Mwag]

I need to check what I have available. If I remember correctly I bought some from a guy a few years ago because it was available and know how hard it is to come by from time to time.
If you haven't heard back from me in a day or 2 - pm me to remind me.
If you don't have to have 25-20 headstamp I know that I could probably put together a mixed pack of 218bee that would need to be necked up or 32-20 that would need to be necked down.

 

[Bob Nelson 35Whelen]

I need to check what I have available. If I remember correctly I bought some from a guy a few years ago because it was available and know how hard it is to come by from time to time.
If you haven't heard back from me in a day or 2 - pm me to remind me.
If you don't have to have 25-20 headstamp I know that I could probably put together a mixed pack of 218bee that would need to be necked up or 32-20 that would need to be necked down.

@Mwag
If making them from 32-20 brass use plenty of case lube and do it very slowly or you will lose more cases than you actually make..
If necking up the 218 bee brass use a good tapered expander like the Lee fls and dry case lube for the neck.
Bob

 

[Wildcatter]

PM sent

 

[Mwag]

Pm sent

 

[Bullthrower338]

~Bullets ~

About Our Bullets ~ We have been supplying cast bullets to customers now for about 25 years. In that time we have learned that when it comes to shooting lead alloy bullets in...

bullshop.weebly.com

I have had really good experiences with Dan at the bull shop for quality cast bullets. He even makes me cast plinking bullets for my 505 Gibbs