Trophies from UK to USA

maxtheflyinghorse

AH senior member
Joined
Sep 10, 2021
Messages
69
Reaction score
159
Media
7
Hello there can anyone help me by giving advice on how to transport trophies from UK to USA. Moving there permanently and all are European mounts. Red stag , fallow buck , roe buck and muntjac
 
'Max',

I have no direct experience with your exact situation, but from personal experience with import from other countries I believe you have basically two tasks: (1) satisfying the US govt import requirements (which can involve three agencies; the US Fish & Wildlife Service, the Dept of Agriculture, and US Customs) and (2) satisfying the UK authorities export requirements (if any). With those documents in hand, then it's a matter of selecting an air-freight forwarder to move them out of the UK, and then selecting a freight clearing agent to expedite the USA import after arrival at the port of entry.
I would start by asking the USF&WS in writing what they will require in your situation, and since you have no "raw" trophies, and no CITES listed animals (I'm not sure about the Muntjac) their requirements might be fairly straightforward. Being "finished" and not "raw" trophies, the US Dept of Agriculture requirements might also be fairly simple. If they require UK export documentation, then you'll have to obtain that. It is ALWAYS a good idea to keep all documents associated with the trophies in case authorities at either end require further supporting documents (hunting licenses, receipts, etc.).
I would get started on this as soon as possible, as with any govt agency the wheels turn slowly.
I would not be surprised if there is a USF&WS office, or agent in the UK, and you might start by communicating with them. They might be quicker to respond that USF&W HQ.
 
@maxtheflyinghorse
Since you have finished taxidermy, I suggest contacting one of the moving companies (Atlas, United ect) that move military families around the world. They will be able to help you out.
 

Forum statistics

Threads
64,543
Messages
1,421,298
Members
130,931
Latest member
klrahul
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top