Remington Model Seven 7mm-08

[Cbump]

I bought this Model 7 from a forum member with original wood stock. That member used Docs gun shop in Carrollton to add a Shilen barrel and work the trigger. Trigger is light and crisp. I do not know round count on barrel, but the member hadn’t shot It in years and used It for hunting not target shooting.
Once I received It, I replaced the stock with an HS Precision PSS050, sent the bolt off to be rejeweled (looks amazing), added Talley rings, Leupold VX3HD, and Harris S-BRM 6-9” bipod.
Once I put this together, I went to the range and shot 2 shots and realized I didn’t have the right tools with me to sight the scope in. Have not been back.
Rifle was cleaned fully with Butchs Bore Shine and Hoppes on 2/18/22. So probably needs to be fouled a bit.
Need to fund other hobbies and have plenty of other deer rifles.
Some of the ammo was bought from this forum and isn’t all full boxes. I did not shoot them from this rifle however.

31 rounds federal fusion
50 rounds federal BT
3 rounds hornady superformance
40 rounds nosler brand BT
20 rounds Winchester ballistic silver tip

Sling not included as It's shared with other firearms of mine.

http://www.shilen.com/
https://www.harrisbipods.com/product/s-brm-bipod/
https://hsprecision.com/product/pss050/
https://www.leupold.com/vx-3hd-3-5-10x40-cds-zl-duplex

$1500
$1750 with ammo (will not sell ammo before rifle is sold)

I’m new here but have a 20k+ posts on **NOT**PERMITTED**.com if you’d like to look into me. 100s of classified deals.

If we work out a deal I will get with my FFL to check into shipping costs.

-Chris

[redacted]

 

[Cbump]

FYI, sorry I copied my add from the forum I referenced that is blocked out. I purchased the ammo from there, not here. Text me for info

 

[375 Ruger Fan]

@Cbump "Once I put this together, I went to the range and shot 2 shots and realized I didn’t have the right tools with me to sight the scope in."

What tools are required to sight in a scope? Some scopes require a penny or a dime, others that I am familiar with require nothing. This is assuming you already bore sighted the scope prior to coming to the range.

 

[Cbump]

Apparently this Leupold has a zero stop and requires a tiny Allen wrench to take the cap off. It came with the Allen wrench, which is included in this sale, but I didn’t know what It was for and left It in the box. At the range I had nothing that would work lol

 

[AfricaHunting.com]

I bought this Model 7 from a forum member with original wood stock. That member used Docs gun shop in Carrollton to add a Shilen barrel and work the trigger. Trigger is light and crisp. I do not know round count on barrel, but the member hadn’t shot It in years and used It for hunting not target shooting.
Once I received It, I replaced the stock with an HS Precision PSS050, sent the bolt off to be rejeweled (looks amazing), added Talley rings, Leupold VX3HD, and Harris S-BRM 6-9” bipod.
Once I put this together, I went to the range and shot 2 shots and realized I didn’t have the right tools with me to sight the scope in. Have not been back.
Rifle was cleaned fully with Butchs Bore Shine and Hoppes on 2/18/22. So probably needs to be fouled a bit.
Need to fund other hobbies and have plenty of other deer rifles.
Some of the ammo was bought from this forum and isn’t all full boxes. I did not shoot them from this rifle however.

31 rounds federal fusion
50 rounds federal BT
3 rounds hornady superformance
40 rounds nosler brand BT
20 rounds Winchester ballistic silver tip

Sling not included as It's shared with other firearms of mine.

http://www.shilen.com/
https://www.harrisbipods.com/product/s-brm-bipod/
https://hsprecision.com/product/pss050/
https://www.leupold.com/vx-3hd-3-5-10x40-cds-zl-duplex

$1500
$1750 with ammo (will not sell ammo before rifle is sold)

I’m new here but have a 20k+ posts on **NOT**PERMITTED**.com if you’d like to look into me. 100s of classified deals.

If we work out a deal I will get with my FFL to check into shipping costs.

-Chris

[redacted]

View attachment 469232View attachment 469233View attachment 469234

Hi @Cbump, Your private information was removed from your post for privacy reasons. If you want to provide someone your personal information please do so in the Conversation/Private Message (PM) system, thank you.

As per our posting guidelines:
It is not okay to post your own personal information or post links to your personal information, including but not limited to email addresses, telephone numbers, mailing addresses or identification numbers. If you want to provide someone else your personal information please do so in the Conversation/Private Message (PM) system.

 

[Cbump]

No problem!

 

[gprippers]

so do you have the original barrel and stock? thanks

 

[Cbump]

No sir. I bought It with this barrel and sold the wood stock I pulled off.

 

[Cbump]

Sold pending funds