Please I.D. these bases

SkullKeeper

AH elite
Joined
Feb 1, 2021
Messages
1,074
Reaction score
2,145
Location
Virginia
Media
35
Hunting reports
Africa
6
Hunted
RSA, Tanzania, Zambia
Can anyone tell me what mounting bases these are ? Thank you
5A83D023-60BD-418C-8ECB-C1885513F34A.jpeg
66C19863-82A9-48E0-B27D-C1303D744DA0.jpeg
 
Talley. If you e-m them a pic (w/ the gun details,) they can confirm exact specs. Excellent quality-can't tell if it's a low (0.3") or med (0.4") off the receiver. Can see it's a large ring M98 by the diff in base heights (in which case the rear may be much higher.) Good stuff! Not many have a (scope ring) recoil lug incorporated! ;) From the numbers alone, you will be able to figure it out in Talley's on-line catalog (I've seen numbers imprinted/inscribed below the bases/rings when the screwholes prevent seeing same.) Good luck!
 
Talley. If you e-m them a pic (w/ the gun details,) they can confirm exact specs. Excellent quality-can't tell if it's a low (0.3") or med (0.4") off the receiver. Can see it's a large ring M98 by the diff in base heights (in which case the rear may be much higher.) Good stuff! Not many have a (scope ring) recoil lug incorporated! ;) From the numbers alone, you will be able to figure it out in Talley's on-line catalog (I've seen numbers imprinted/inscribed below the bases/rings when the screwholes prevent seeing same.) Good luck!
Ok gotcha - thank you for your input sir
 
Talley. If you e-m them a pic (w/ the gun details,) they can confirm exact specs. Excellent quality-can't tell if it's a low (0.3") or med (0.4") off the receiver. Can see it's a large ring M98 by the diff in base heights (in which case the rear may be much higher.) Good stuff! Not many have a (scope ring) recoil lug incorporated! ;) From the numbers alone, you will be able to figure it out in Talley's on-line catalog (I've seen numbers imprinted/inscribed below the bases/rings when the screwholes prevent seeing same.) Good luck
Talley most likely
thank you Mark
 
Let me know what rings you need-i might have them (as all T rings fit all T bases.) Most are on guns, but I have a few leftovers...
 
Those are indeed Talleys. And it looks like someone has altered the rear base to accommodate their slide-on peep as they have filed off the rear shoulder and made cuts on the right side for the tightening screw. the bases are all the same height - the rings are where height adjustments are made with these model talleys.
 
I think what you mean is the bases are the same elevation, not the same height (thickness). They have different height bases and rings. They have to, as the large ring Mauser's receiver elevation is different from front-to-rear, for example. Many receivers slope, so the base thickness typically varies to accomodate (and thus you use the same height rings.) 'Just clarifying for the gun owner...It's why they sell the same height rings in sets. ;) I have zero guns with varying height ring sets, excepting Ruger/CZ-type integrated (1-piece) ring-base sets, which must be, for the aforementioned receiver dimension reasons. The different height rings are to accommodate different scope objective lens diameters.
 
Last edited:
I think what you mean is the bases are the same elevation, not the same height (thickness). They have different height bases and rings. They have to, as the large ring Mauser's receiver elevation is different from front-to-rear, for example. Many receivers slope, so the base thickness typically varies to accomodate (and thus you use the same height rings.) 'Just clarifying for the gun owner...


Yes - that's what i mean. I just didn't want the OP pulling his hair out looking for different height Talley Mauser bases like this - he ain't gonna find them...
 
Yes - that's what i mean. I just didn't want the OP pulling his hair out looking for different height Talley Mauser bases like this - he ain't gonna find them...
Unless a super custom gun, they too come in (appropriately-sized) sets. Cannot go wrong.
 
Yes-they sell blanks for custom or off-spec guns and then, it's up to you to select the correct height bases and/or rings!
 
And these? Not to hijack this thread, but these came on this rifle and I’ve been meaning to ask here. Thanks!

0C670B2B-B1E7-4B3C-9F6A-42DE86E6C487.jpeg
4C8F92B0-EE7E-4634-8951-67CB14D85DE3.jpeg
008D17A7-2477-4AB5-AFD7-DDC896A3ECCA.jpeg
 
Last edited by a moderator:
And these? Not to hijack this thread, but these came on this rifle and I’ve been meaning to ask here. Thanks!
They look like Talley. Maybe a Gen. 1? What caliber is that Interarms? Nice! My 1st "real" centerfire as a kid, traded for work done on a '57 Chevy panel delivery wagon hot rod for a neighbor (lol 30 yrs later.) Have had 3: All shooters. The base/ring maker up in Alaska makes some very similar, great products!!
 
They look like Talley. Maybe a Gen. 1? What caliber is that Interarms? Nice! My 1st "real" centerfire as a kid, traded for work done on a '57 Chevy panel delivery wagon hot rod for a neighbor (lol 30 yrs later.) Have had 3: All shooters. The base/ring maker up in Alaska makes some very similar, great products!!
It’s a custom .416 Taylor. I have a .375 also. I really like them and they are great shooters. I need to get scopes/red dot on them though as my eyes aren’t what they used to be.
 
Talley. If you e-m them a pic (w/ the gun details,) they can confirm exact specs. Excellent quality-can't tell if it's a low (0.3") or med (0.4") off the receiver. Can see it's a large ring M98 by the diff in base heights (in which case the rear may be much higher.) Good stuff! Not many have a (scope ring) recoil lug incorporated! ;) From the numbers alone, you will be able to figure it out in Talley's on-line catalog (I've seen numbers imprinted/inscribed below the bases/rings when the screwholes prevent seeing same.) Good luck!
Let me know what rings you need-i might have them (as all T rings fit all T bases.) Most are on guns, but I have a few leftovers...
Thank you for that offer. I am wanting to put a set of EAW or Recknagel quick release mounts on this rifle. I will in all likelihood not use these - oh, it came with a peep sight also. I took that off just for the photos.
 
yes-talley has a peep that goes in place of the rear ring (if using the Q/D rings-can put on in seconds. If not using the QD levers, a few more seconds lol) have seen the EAW at NECG in NH and plenty of fancy double guns. Good stuff!
 
A guy in CA has some really nice QD setups and open sights for safari guns....Hmmm Breeding?-Smithson! He wanted $1,800 after our first convo, but I'm sure it was well worth it! Both great gunsmiths!!!
 
Thank you for that offer. I am wanting to put a set of EAW or Recknagel quick release mounts on this rifle. I will in all likelihood not use these - oh, it came with a peep sight also. I took that off just for the photos.

If that Talley peep is unaltered and you are looking to unload it - I may i know a guy...
 

Forum statistics

Threads
56,534
Messages
1,207,169
Members
98,801
Latest member
jinyingdehe199
 

 

 

Latest posts

Latest profile posts

Longfeather1 wrote on Cmwkwarrwn's profile.
Hello Clark
Thanks for the interest in my rifle. If you want to discuss it further you can email me direct at [redacted] or call my cell number [redacted].
Look forward to talking with you.
Regards,
Jack Kramer
quacker attacker wrote on JMV375's profile.
Hello, My wife and I hunted with Marius 2 years ago. He fit us into his schedule after a different outfitter "bailed" on us. He was always very good with communications and although we didn't end up meeting him personally, he called us multiple times during our hunt to make sure things were going well. We were very happy with him.
TERMINATOR wrote on Cuthberto's profile.
Reach out to the guys at Epic Outdoors.

They will steer you right for landowner tags and outfitters that have them.

I have held a membership with them for years and they are an invaluable resource.

Way better that asking random people on the internet...WAY better

Raskolnikov743 wrote on skydiver386's profile.
Skydiver386,

Did you ever find your 30-06 CZ550? I own a fairly solid conditioned one, if you wanted to talk.

[redacted]
 
Top