Pirkan
AH veteran
Please note that the following rifle is in Sweden but I am willing to export it as long as the buyer pays for shipping/permits. The rifle is also LISTED ELSEWHERE on Swedish pages but the market for this type of rifle is understandibly quite small here so the interest has been very low.
I am selling my 1990 production 602 orginally made in 458 Winchester Magnum and later reamed out to 458 Lott. The barrel has not been shortened but has had a sling mount added by a previous owner. The previous owner also fitted it with an enlarged wood bolt handle and modified the stock comb. The rifle is also fitted with the curved single stage trigger and I think it has had some work done to it as it is very short and crisp while being rather light, I´d guess 1 kg or 2 lbs. Unfortunately some previous owner has also drilled and tapped the front receiver bridge. The gun is currently in a stock from a Cz 550 that has been epoxy bedded and had front and rear stock bolts as well as a 1 inch libsaver fitted but I am including the modified orginal stock. The stock is also fitted with a homemade kydex cheekriser that can be removed witout any traces on the stock. I´m also including a Nikon Monarch 3 1-4x20 fitted in qd Warne rings. Unfortunately the rings show some damage from recoil, I assume this happened from load development from a lead sled, so those would need to be replaced before serious use. I´m including a 3 die set and brass holder from Hornady and a Lee factory crimp die as well as 42 woodleigh 550 gr soft points, 17 unfired Hornady cases and 30-40 once/twicefired hornady cases depending on how much I shoot it before it´s sold. I also have a small amount of handloaded ammo that can be disassembled for components. The gun is used with some minor marks in the bluing and wood but it´s in generally nice condition. There are some dents in the wood next to the barrel channel but other than this it´s just normal light wear.
For everything mentioned above I am asking for 1400 Euros
Dont´t hesitate to ask any questions and I´ll do my best to answer them
I am selling my 1990 production 602 orginally made in 458 Winchester Magnum and later reamed out to 458 Lott. The barrel has not been shortened but has had a sling mount added by a previous owner. The previous owner also fitted it with an enlarged wood bolt handle and modified the stock comb. The rifle is also fitted with the curved single stage trigger and I think it has had some work done to it as it is very short and crisp while being rather light, I´d guess 1 kg or 2 lbs. Unfortunately some previous owner has also drilled and tapped the front receiver bridge. The gun is currently in a stock from a Cz 550 that has been epoxy bedded and had front and rear stock bolts as well as a 1 inch libsaver fitted but I am including the modified orginal stock. The stock is also fitted with a homemade kydex cheekriser that can be removed witout any traces on the stock. I´m also including a Nikon Monarch 3 1-4x20 fitted in qd Warne rings. Unfortunately the rings show some damage from recoil, I assume this happened from load development from a lead sled, so those would need to be replaced before serious use. I´m including a 3 die set and brass holder from Hornady and a Lee factory crimp die as well as 42 woodleigh 550 gr soft points, 17 unfired Hornady cases and 30-40 once/twicefired hornady cases depending on how much I shoot it before it´s sold. I also have a small amount of handloaded ammo that can be disassembled for components. The gun is used with some minor marks in the bluing and wood but it´s in generally nice condition. There are some dents in the wood next to the barrel channel but other than this it´s just normal light wear.
For everything mentioned above I am asking for 1400 Euros
Dont´t hesitate to ask any questions and I´ll do my best to answer them
Last edited by a moderator:
