Bullet pullers help please

Rare Breed

Lifetime bronze benefactor
AH ambassador
Joined
Dec 23, 2018
Messages
5,478
Reaction score
14,173
Location
Atlanta GA
Media
36
Articles
1
Hunting reports
Africa
5
I am trying to buy a bullet puller for my 400 grain 450-400. I do not understand what collet size to get. I have an RCBS press. Can someone let me know what to buy please. Thanks!
 
Hi Rare Breed,

First you will need a RCBS Standard Bullet Puller (RCBS part # 9440). Then you need to use the properly sized bullet puller collet. The caliber (bullet diameter) of your 450/400 should be 0.405" and am not sure which collet to recommend. You will either need the .40 caliber (RCBS part # 9432) or the .41 caliber (RCBS part # 9433).

I would suggest you contact RCBS to confirm. You can reach them by e-mail through this page:


Their phone number is (800) 533-5000 should you prefer to contact them that way.

Good luck,
Aarwolf
 
There is also an option to use a kinetic bullet puller. I place a foam ear plug into the "nose" of the puller. When the bullet exits the case, it is cushioned by the foam, allowing it to be reused. I believe Lymen makes the oversized kinetic puller necessary for larger calibers.
 
For pulling bullets I use the RCBS unit in my press. Collets are pretty flexible... I use a .44 collet to pull .404 (.423") bullets, works fine. I expect that a collet for .410" would work fine for your .450-400.
 
There is also an option to use a kinetic bullet puller. I place a foam ear plug into the "nose" of the puller. When the bullet exits the case, it is cushioned by the foam, allowing it to be reused. I believe Lymen makes the oversized kinetic puller necessary for larger calibers.
Thanks!
 
For pulling bullets I use the RCBS unit in my press. Collets are pretty flexible... I use a .44 collet to pull .404 (.423") bullets, works fine. I expect that a collet for .410" would work fine for your .450-400.
Thanks!
 
There is also an option to use a kinetic bullet puller. I place a foam ear plug into the "nose" of the puller. When the bullet exits the case, it is cushioned by the foam, allowing it to be reused. I believe Lymen makes the oversized kinetic puller necessary for larger calibers.
Thanks!
 

Forum statistics

Threads
61,073
Messages
1,334,678
Members
114,112
Latest member
JannMulga
 

 

 

Latest profile posts

aquinn wrote on Raptor59's profile.
I'd like a bag of 100. I could actually pick it up since I'm in North Irving, but if you prefer, shipping it is fine.
Good day I'm Rainhold Neumbo form Namibia, I'm a professional taxidermist, anyone, can help me job I do mounting animal, full mounts, wall pedestal, shoulder mounts and many other, I'm based in Namibia I willing to travel where opportunities are, thank you, my WhatsApp number +264-814136480.
Email address neumbomakafa9@gmail.com
Just did a podcast, check it out if interested!

 
Top