Pirkan
AH veteran
Hello, I am considering selling my Brno 602 in 458 Lott and help my friend sell his Cz 550 in 416 Rigby. We live in Sweden where the market for such rifles is tiny so I am open to sending them to other EU countries but I need to know a fair price in euros for them.
My Brno is made in 1990 so it has no peep and the machining is honestly rather rough in a lot of places. I have put it in a Cz 550 stock that has been epoxy bedded and had front and rear stock bolts installed as well as a 1 inch limbsaver buttpad. I have made a kydex cheekriser that is attached with addhesive 3m dual lock strips so it should be possible to remove without any permanent traces. I still have the original stock but the comb has been modified. It has been rechambered from 458 Win Mag to Lott and had a barrel mounted slingmount fitted as well as an enlarged wooden bolt knob. The front of the receiver has unfortunately been drilled and tapped. It has the curved single stage trigger and I think it has been lightened a bit, the pull is very short and quite light. The overall condition is good with some minor wear on high spots on the metal and some minor dings in the wood except a larger one on the right side of the barrel channel. I can include some dies and maybe 40 woodleigh 550 gr soft point bullets as well as roughly 70-80 cases with most being once fired but some being unfired and some twice fired. I also have a Nikon Monarch 1-4x20 in Warne qd rings I´ll sell with the rifle. The rings are damaged from recoil/improper mounting.
My friend´s 416 is completely stock configured like the picture bellow in near new condition and made in 2009 iirc.
Just a rough estimate of what these could be worth in Germany/France/any bigger EU-market would be greatly appreciated since they´re not sought after here and take ages to sell even at ridiculously low prices.
My Brno is made in 1990 so it has no peep and the machining is honestly rather rough in a lot of places. I have put it in a Cz 550 stock that has been epoxy bedded and had front and rear stock bolts installed as well as a 1 inch limbsaver buttpad. I have made a kydex cheekriser that is attached with addhesive 3m dual lock strips so it should be possible to remove without any permanent traces. I still have the original stock but the comb has been modified. It has been rechambered from 458 Win Mag to Lott and had a barrel mounted slingmount fitted as well as an enlarged wooden bolt knob. The front of the receiver has unfortunately been drilled and tapped. It has the curved single stage trigger and I think it has been lightened a bit, the pull is very short and quite light. The overall condition is good with some minor wear on high spots on the metal and some minor dings in the wood except a larger one on the right side of the barrel channel. I can include some dies and maybe 40 woodleigh 550 gr soft point bullets as well as roughly 70-80 cases with most being once fired but some being unfired and some twice fired. I also have a Nikon Monarch 1-4x20 in Warne qd rings I´ll sell with the rifle. The rings are damaged from recoil/improper mounting.
My friend´s 416 is completely stock configured like the picture bellow in near new condition and made in 2009 iirc.
Just a rough estimate of what these could be worth in Germany/France/any bigger EU-market would be greatly appreciated since they´re not sought after here and take ages to sell even at ridiculously low prices.
